PU (Polyurethane) based Super Gloss Enamel is an all surface solvent based enamel that protects your wood and metal. It is designed to keep interior & exterior surfaces beautiful for long with better Non-yellowing property compared to traditional synthetic based enamels. Wipe the surface clean to make it free from dust, dirt, grease etc. Sand the surface with abrasive paper grit no. 180. Wipe clean and use an appropriate primer to prime the surface. Dents & imperfections can be filled using appropriate fillers which should then be sanded and primed again. One liter of Indigo PU Super Gloss Enamel can be thinned down with 150ml of good quality turpentine for brushing consistency. Apply two coats giving an interval of 4-6 hours between coats.

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Floracem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Floracem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

Royal Indigo Cem is a premium quality waterproof cement paint. Its formulation is designed for ease of mixing, give excellent hiding, and excellent resistance to fungal & algal growth. Proper application of Royal Indigo cem results in extra durability and longer life.

Surface Preparation & Application:

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Royal Indigocem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Royal Indigocem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

Surface Preparation & Application:

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Floracem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Floracem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

Surface Preparation & Application:

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Alfacem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Alfacem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

INDIGO Luxury Interior Emulsion is a high opacity Interior wall emulsion with soft glow finish. It is a pure acrylic based emulsion which provides excellent stain resistance & superior cleaning properties for spotless interiors. It is an Anti-Fungal and Anti-mildew emulsion. Clean the surface of loose paint, dust and grease by sanding with abrasive paper. Wipe clean with a soft cloth, and apply INDIGO Cement Primer. After drying for 4-6 hours, fill the dents in the surface with Polymer Putty. Repeat sanding with abrasive paper, wipe clean, and apply another coat of INDIGO Cement Primer. After drying for 4-6 hours, sand with fine abrasive paper & wipe clean. INDIGO Luxury Interior Emulsion should be thinned by adding 300-400 ml of water to 1 litre of paint, to obtain brushable consistency. For Spraying, add about 500 ml of water. Apply 2 coats, maintaining an overcoat interval of 4-6 hours between coats. A third coat maybe required for dark shades. To remove dirt stains post application, clean the painted surface by sponging with a mild soap solution. Allow fresh paint to cure for 2 weeks before cleaning.

Newly plastered surfaces should be allowed to mature for a minimum period of 6 months before painting. For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry. First apply one coat of Indigo Cement Primer. After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Cement primer. Add water slowly to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper. Apply 2-3 coats by brush, roller or spray keeping 4-6 hours intervals between coats.

Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Seal cracks with a 1:3 mixture of cement and sand. Use of Polymer Putty is highly recommended. Allow 3 months curing prior to painting for newly plastered surfaces. Freshly plastered surfaces require a self-priming coat, obtained by thinning 1 litre of paint with 1 litre of water. Follow with 2 coats of Indigo Exterior Emulsion, obtained by thinning 1 litre of paint with 400 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Bright Ceiling Coat is a revolutionary new concept in paint, designed exclusively for the Ceiling in your room. With its BRIGHT WHITE feature, It provides an excellent contrast to the coloured walls in your room. It is an excellent reflector of light, and hence enhances the brightness level in your room. It has the right level of sheen, specially suited for a Ceiling.

Surface Preparation & Application:

Sand the surface with Emery paper 180 and wipe clean. Apply a coat of Indigo Paints Primer, allow drying for 6-8 hours. Smoothen the surface by filling dents with thin coats of Indigo Acrylic Wall Putty. After drying for 6-8 hours, sand the surface with Emery paper 180. Wipe off loose particles. Apply another coat of primer. Allow drying for 4-6 hrs. Sand the surface with Emery paper 380 and wipe clean. Thin 1 litre of Indigo Bright Ceiling Coat with 200-350 ml water. It can be applied by brush or roller or conventional / airless spray. Normally 2 coats of paint are sufficient for complete opacity and desired finish.

Indigo Metallic Emulsion is a revolutionary water based paint suitable for interior &exterior application. It is based on a pure acrylic formulation and gives a sparkling metallic texture to the walls.

Surface Preparation & Application:

For exterior surfaces, scrub with wire brush and clean the surface of loose paint, dust and grease. For interior surfaces, standard wall preparation methods are to be employed. Apply a priming coat of Indigo Water Thinnable Cement Primer. Follow with 2 coats of Indigo Metallic Emulsion, obtained by thinning 1 litre of paint with 300 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Paints brings you a special paint to protect your roof tiles, which gives unmatched gloss and sheen, and protects the roof tile from algal or fungal attack for years and years.

Surface Preparation & Application:

Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Apply a priming coat, obtained by thing 1 litre of Tile Coat paint with 1 litre of water. Follow with 2 coats of Indigo Tile Coat, obtained by thinning 1 litre of paint with 300 ml of water. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Premium XT Exterior Emulsion is specially designed to withstand extreme weather conditions with superior anti-fungal & anti-algae properties.

Surface Preparation & Application:

Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Seal cracks with a 1:3 mixture of cement and sand. Use of Polymer Putty is highly recommended. Allow 3 months curing prior to painting for newly plastered surfaces. Apply one coat of Indigo Exterior Wall Primer, obtained by thinning 1 litre of primer with 1 litre of water. Follow with 2 coats of Indigo Premium XT Exterior Emulsion, obtained by thinning 1 litre of paint with 400 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Stone & Tile Topcoat is a single pack solvent based clear coat, available in both matt & glossy finish, for natural stone and tiles. It is based on clear acrylics, giving the film a long lasting good look. It has excellent water and alkali resistance and is also resistant to stains. This product is designed for vertical walls and areas with light traffic.

Surface Preparation & Application:

The substrate to be applied must be free of dust, efflorescence, grease, foam release oils and similar contaminants. Clean the surface thoroughly using a stiff brush and wash with clean water to remove algae growth if any. Allow it to dry completely and then clean with turpentine. If the surface is smooth, roughen the surface by sanding the surface using emery / sand paper grit No.180. Remove all dust and clean the surface using turpentine. Apply 2 coats of Indigo Stone & Tile Topcoat directly without thinning, with a time interval of 3-4 hours between coats.

INDIGO Paints Universal Stainers are high strength, concentrated stainers which can be used to give a wide range of exclusive shades. These stainers can tint Plastic Emulsions, Enamels, Oil Paints and Distempers. They can be used for airdrying glossy or matt finish paints for interiors and exteriors. However, they are not recommended for Epoxy, Chlorinated Rubber and allied paints. These are available in a range of twelve attractive colours. Shades prepared from stainers Fast Yellow, Fast Yellow Green, Fast Red and Fast Violet are liable to show shade variation on exteriors.

Indigo Paints brings you a special paint to beautify your exterior floor tiles, and to protect your flooring from algal or fungal attack. It is suitable for application on terrace floor tiles, cement tiles affixed to driveways and walkways, or on any plain cement surface. The paint not only provides an aesthetic glossy finish, but is also resistant to abrasion from human and vehicular traffic, sun, rain, and fungal attack. To apply, first wash the surface with a hose to remove loose dust. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on surfaces prone to water stagnation. Apply a self-priming coat of Indigo Floor Coat Emulsion, by diluting the emulsion with 30-40% water. Follow with 2 coats of Indigo Floor Coat Emulsion, thinning with water to obtain brushable consistency, keeping 6-7 hour interval between coats. Do NOT allow traffic on the surface for 48 hours, to allow the paint to develop full hardness.

Indigo Sleek single pack PU Topcoat is a polyurethane based clear topcoat designed to be used on all types of interior wood work. It provides a durable film that protects the furniture from water, alcohol and other household chemicals. It is available in glossy & matt finishes.

Surface Preparation & Application:

Sand the wooden substrate along the grains sequentially, with abrasive paper from grit number 80 180. The dust, dirt that comes out during the sanding process should be removed completely. Apply 2-3 coats of Sleek NC Sanding Sealer. Apply 2 coats of Sleek Single Pack PU topcoat by brush or spray. Allow 6-8 hours drying time between coats.

PU (Polyurethane) based Super Gloss Enamel is an all surface solvent based enamel that protects your wood and metal. It is designed to keep interior & exterior surfaces beautiful for long with better Non-yellowing property compared to traditional synthetic based enamels. Wipe the surface clean to make it free from dust, dirt, grease etc. Sand the surface with abrasive paper grit no. 180. Wipe clean and use an appropriate primer to prime the surface. Dents & imperfections can be filled using appropriate fillers which should then be sanded and primed again. One liter of Indigo PU Super Gloss Enamel can be thinned down with 150ml of good quality turpentine for brushing consistency. Apply two coats giving an interval of 4-6 hours between coats.

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Floracem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Floracem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

Royal Indigo Cem is a premium quality waterproof cement paint. Its formulation is designed for ease of mixing, give excellent hiding, and excellent resistance to fungal & algal growth. Proper application of Royal Indigo cem results in extra durability and longer life.

Surface Preparation & Application:

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Royal Indigocem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Royal Indigocem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

Surface Preparation & Application:

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Floracem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Floracem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

Surface Preparation & Application:

Clean surface thoroughly with a stiff wire brush, to free it from dirt and algae. Previously painted surfaces should be washed or brushed down. If the surface is in flaky or powdery condition, it should be removed by scrapping or wire-brushing. Cement paints should not be applied on non-absorbent surfaces such as glazed bricks or previously painted enamel work. Saturate the surface with clean water several times, and allow excess water to disappear. Mix equal parts by volume of cement paint and water, and apply first coat with long hair brush. Do water-curing after 6-8 hours. Apply second coat 24 hours after application of first coat, and again cure with water after 6 hours. Two coats of Alfacem are sufficient for most surfaces. Do not use saline water for mixing or for curing. No waterproofing compounds should be used either as a base coat, additive or top coat. Do not intermix different shades of Alfacem. Restrict the use of blue, pink and green shades to interiors as they are liable to fleet on exterior applications. Avoid use of dark shades over large unrelieved areas.

INDIGO Luxury Interior Emulsion is a high opacity Interior wall emulsion with soft glow finish. It is a pure acrylic based emulsion which provides excellent stain resistance & superior cleaning properties for spotless interiors. It is an Anti-Fungal and Anti-mildew emulsion. Clean the surface of loose paint, dust and grease by sanding with abrasive paper. Wipe clean with a soft cloth, and apply INDIGO Cement Primer. After drying for 4-6 hours, fill the dents in the surface with Polymer Putty. Repeat sanding with abrasive paper, wipe clean, and apply another coat of INDIGO Cement Primer. After drying for 4-6 hours, sand with fine abrasive paper & wipe clean. INDIGO Luxury Interior Emulsion should be thinned by adding 300-400 ml of water to 1 litre of paint, to obtain brushable consistency. For Spraying, add about 500 ml of water. Apply 2 coats, maintaining an overcoat interval of 4-6 hours between coats. A third coat maybe required for dark shades. To remove dirt stains post application, clean the painted surface by sponging with a mild soap solution. Allow fresh paint to cure for 2 weeks before cleaning.

Newly plastered surfaces should be allowed to mature for a minimum period of 6 months before painting. For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry. First apply one coat of Indigo Cement Primer. After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Cement primer. Add water slowly to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper. Apply 2-3 coats by brush, roller or spray keeping 4-6 hours intervals between coats.

Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Seal cracks with a 1:3 mixture of cement and sand. Use of Polymer Putty is highly recommended. Allow 3 months curing prior to painting for newly plastered surfaces. Freshly plastered surfaces require a self-priming coat, obtained by thinning 1 litre of paint with 1 litre of water. Follow with 2 coats of Indigo Exterior Emulsion, obtained by thinning 1 litre of paint with 400 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Bright Ceiling Coat is a revolutionary new concept in paint, designed exclusively for the Ceiling in your room. With its BRIGHT WHITE feature, It provides an excellent contrast to the coloured walls in your room. It is an excellent reflector of light, and hence enhances the brightness level in your room. It has the right level of sheen, specially suited for a Ceiling.

Surface Preparation & Application:

Sand the surface with Emery paper 180 and wipe clean. Apply a coat of Indigo Paints Primer, allow drying for 6-8 hours. Smoothen the surface by filling dents with thin coats of Indigo Acrylic Wall Putty. After drying for 6-8 hours, sand the surface with Emery paper 180. Wipe off loose particles. Apply another coat of primer. Allow drying for 4-6 hrs. Sand the surface with Emery paper 380 and wipe clean. Thin 1 litre of Indigo Bright Ceiling Coat with 200-350 ml water. It can be applied by brush or roller or conventional / airless spray. Normally 2 coats of paint are sufficient for complete opacity and desired finish.

Indigo Metallic Emulsion is a revolutionary water based paint suitable for interior &exterior application. It is based on a pure acrylic formulation and gives a sparkling metallic texture to the walls.

Surface Preparation & Application:

For exterior surfaces, scrub with wire brush and clean the surface of loose paint, dust and grease. For interior surfaces, standard wall preparation methods are to be employed. Apply a priming coat of Indigo Water Thinnable Cement Primer. Follow with 2 coats of Indigo Metallic Emulsion, obtained by thinning 1 litre of paint with 300 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Paints brings you a special paint to protect your roof tiles, which gives unmatched gloss and sheen, and protects the roof tile from algal or fungal attack for years and years.

Surface Preparation & Application:

Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Apply a priming coat, obtained by thing 1 litre of Tile Coat paint with 1 litre of water. Follow with 2 coats of Indigo Tile Coat, obtained by thinning 1 litre of paint with 300 ml of water. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Premium XT Exterior Emulsion is specially designed to withstand extreme weather conditions with superior anti-fungal & anti-algae properties.

Surface Preparation & Application:

Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Seal cracks with a 1:3 mixture of cement and sand. Use of Polymer Putty is highly recommended. Allow 3 months curing prior to painting for newly plastered surfaces. Apply one coat of Indigo Exterior Wall Primer, obtained by thinning 1 litre of primer with 1 litre of water. Follow with 2 coats of Indigo Premium XT Exterior Emulsion, obtained by thinning 1 litre of paint with 400 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.

Indigo Stone & Tile Topcoat is a single pack solvent based clear coat, available in both matt & glossy finish, for natural stone and tiles. It is based on clear acrylics, giving the film a long lasting good look. It has excellent water and alkali resistance and is also resistant to stains. This product is designed for vertical walls and areas with light traffic.

Surface Preparation & Application:

The substrate to be applied must be free of dust, efflorescence, grease, foam release oils and similar contaminants. Clean the surface thoroughly using a stiff brush and wash with clean water to remove algae growth if any. Allow it to dry completely and then clean with turpentine. If the surface is smooth, roughen the surface by sanding the surface using emery / sand paper grit No.180. Remove all dust and clean the surface using turpentine. Apply 2 coats of Indigo Stone & Tile Topcoat directly without thinning, with a time interval of 3-4 hours between coats.

INDIGO Paints Universal Stainers are high strength, concentrated stainers which can be used to give a wide range of exclusive shades. These stainers can tint Plastic Emulsions, Enamels, Oil Paints and Distempers. They can be used for airdrying glossy or matt finish paints for interiors and exteriors. However, they are not recommended for Epoxy, Chlorinated Rubber and allied paints. These are available in a range of twelve attractive colours. Shades prepared from stainers Fast Yellow, Fast Yellow Green, Fast Red and Fast Violet are liable to show shade variation on exteriors.

Indigo Paints brings you a special paint to beautify your exterior floor tiles, and to protect your flooring from algal or fungal attack. It is suitable for application on terrace floor tiles, cement tiles affixed to driveways and walkways, or on any plain cement surface. The paint not only provides an aesthetic glossy finish, but is also resistant to abrasion from human and vehicular traffic, sun, rain, and fungal attack. To apply, first wash the surface with a hose to remove loose dust. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on surfaces prone to water stagnation. Apply a self-priming coat of Indigo Floor Coat Emulsion, by diluting the emulsion with 30-40% water. Follow with 2 coats of Indigo Floor Coat Emulsion, thinning with water to obtain brushable consistency, keeping 6-7 hour interval between coats. Do NOT allow traffic on the surface for 48 hours, to allow the paint to develop full hardness.

Indigo Sleek single pack PU Topcoat is a polyurethane based clear topcoat designed to be used on all types of interior wood work. It provides a durable film that protects the furniture from water, alcohol and other household chemicals. It is available in glossy & matt finishes.

Surface Preparation & Application:

Sand the wooden substrate along the grains sequentially, with abrasive paper from grit number 80 180. The dust, dirt that comes out during the sanding process should be removed completely. Apply 2-3 coats of Sleek NC Sanding Sealer. Apply 2 coats of Sleek Single Pack PU topcoat by brush or spray. Allow 6-8 hours drying time between coats.