Post Buy Requirement

Our Product / Services

  1. Paints 17 Products available
  2. Primer Paint 4 Products available
  3. Distemper 3 Products available
  4. Industrial Chemicals 3 Products available
  5. Polyurethane Sealants

    2 Products available
  6. Dyes & Pigments

    2 Products available
  7. Body Fillers

    1 Products available
  8. Inorganic And Organic Solvents

    1 Products available
  9. Catalysts And Absorbents

    1 Products available
  10. Wall Putty

    1 Products available
  11. Others Products / Services 13 Products / Services available

Distemper

We are leaders in the market for providing best range of Acrylic Pouch Distemper, Acrylic Washable Distemper, Acrylic Distemper and exterior emulsion

Acrylic Pouch Distemper

Indigo Acrylic Distemper available in pouch packing is an entry level distemper available in bright colours.

Surface Preparation & Application:

Clean and remove loose plaster or dust using sand paper. Add approximately 500-750 ml water to 1 Kg of INDIGO Acrylic (Pouch) Distemper. Apply two coats of INDIGO Acrylic (Pouch) Distemper on walls. Keep 3-4 hrs interval between two coats. INDIGO Acrylic (Pouch) Distemper will give smooth and matt finish on the walls. Any minor stains may be mopped up after two weeks with wet cloth. To get better results use within two years from date of manufacturing.

DESTROY THE POUCH AFTER USE.

Advantages
  • Smooth finish
  • Easily miscible with water
  • Available in variety of readymade shades
View Complete Details

Acrylic Washable Distemper

  • CAPACITY 500-600 ml
Newly plastered surfaces should be allowed to mature for a minimum period of 6 months before painting. For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry. First apply one coat of Indigo Cement Primer. After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Cement primer. Add water slowly to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper. Apply 2-3 coats by brush, roller or spray keeping 4-6 hours intervals between coats.
View Complete Details

Acrylic Distemper

Indigo Acrylic Distemper is a water based interior paint which gives a matt finish to the walls.

Surface Preparation & Application:

Newly plastered surfaces should be allowed to mature for a minimum period of 6 months before painting. For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry. First apply one coat of Indigo Cement Primer. After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Cement primer. Add water slowly to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper. Apply 2-3 coats by brush, roller or spray keeping 4-6 hours intervals between coats.

Advantages
  • Smooth finish
  • Washable
  • Available in variety of readymade shades and Bases
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us