Wrist Strap Tester

• MOQ : 1 Piece
• Operating Temperature : 0-50 Degree Centigrade
• Unit dimensions: : 150 x 200 x 65mm
• Accuracy : +/-10%
• Condition : New
• Country of Origin : India
• Warranty : 12 Months
• Power : Electronic

Operates on AC or DC power. Use it to check wrist straps in production facilities, remote sites or field service locations. Easy-to-use Wrist Strap Tester checks the entire wrist strap system while it's being worn, or it can test the individual components to isolate faults. Powered by 9V lithium manganese bat more...

• MOQ : 1 Piece
• Low & High Fail : Red LED (With Alarm)
• Test Actuation : By Pressing Metal Sensor Plate
• Battery Status : By Dual Color LED
• Consist of : Wrist strap tester, Yellow Wall Station, Foot Plate
• Foot Wear : 0.75 to 100 megaohm
• Indications : Pass – Green LED
• Power Supply : 9 V Battery
• Range Selection : By Slide Switch
• Accuracy : +/-10%

more...

• MOQ : 5 Piece
• Voltage : 24 VAC
• Supply Type : Supplier
• Material : ABS
• Current : 1.5 A
• Usage : Laboratory

more...

• MOQ : 1 Piece
• Dimensions : 135 x 70 x 30 mm
• Weight : 150 gms with battery
• Range : wrist strap 0. 75 to 10 meg ohm
• Warranty : 12 months

more...

• MOQ : 1 Piece
• Range Selection : By Slide Switch
• Weight : Approx 150 g with Battery
• Foot Wear : 0.75 to 100 megaohm
• Optional : Instruction Board, Foot Plate, Carry Case
• Test Actuation : By Pressing Metal Sensor Plate
• Accuracy : +/-10%
• Calibration : Recommended every 12 months
• Consist of : Wrist strap tester, Yellow Wall Station, Foot Plate
• Low & High Fail : Red LED (With Alarm)

more...

• Application Areas : Diagnostic centers, Municipal hospitals, Primary health centers, Surgical treatment centers
• Weight : App. 150 Gms
• Brand Name : Blue Sky
• Dimensions : 135 x 70 x 25 mm
• Voltage : Wrist strap 0.75 to 10 Meg ohms Foot Wear 0.75 to 100 Meg ohms
• Frequency : 9 Volt Battery
• Model Name/Number : WSFT - 01
• Accuracy : +/- 10%
• Power supply : 9 Volt
• Features : It can be wall mounted outside the ESD protected area by using the Instruction board. Foot wears can be tested by connecting the Foot Plate

more...

• Actuation : By Press to ON switch
• Pass Band : 0.75 Megohms to 10 Megohms.
• Dimensions : 135 x 70 x 25
• Traceability : To National standards
• Accuracy : + 10%
• Indications : Pass – Green LED Fail – RED LEDs (High & Low) Audible Alarm for Fail mode.
• Power supply : 9 V DC battery.
• Weight : 100 gms
• Warranty : 12 months.
• Calibration : Recommended every 12 months

more...

• Power Supply : 9 V Battery
• Dimensions : 125 x 75 x 29 mm
• Accuracy : +10 %
• Warranty : 1 Year
• Weight : 200 gms 
• Model Number : Z102

more...

• Power Supply : 9V Battery
• Features : Use anywhere to check personnel ESD grounding quickly, Checks contact resistance between Wrist Strap and skin
• Dimensions (approx.) : 117mm (L) x 80mm (W) x 40mm (H)
• Changeover Point : ±10%
• Resistance Test Range : 750KΩ ~ 10MΩ
• Grounding Wire : 2.5 meter
• Weight (approx.) : 110 grams

more...

• Material : Mild Steel
• Accuracy : +/-10%
• Voltage : 240V
• Condition : New
• Operating Temperature : 0-50 Degree Centigrade
• Application : Clean Room, Automotive Industry

Features: Rugged construction Optimum performance High functionality Long operational life more...

• Power requirement : 9 V DC battery
• Dimensions : 125 x 75 x 29 mm
• Low Battery : Warning less than 7 volts
• Weight : 200 grams
• Accuracy : ± 10%
• Actuation : By gently pressing metal sensor plate
• Warranty : 12 months
• Calibration : Recommended every 12 months
• Traceability : To national standards

Wrist straps and ESD footwears are the first lines of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time, the wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test ev more...

• MOQ : 1 Piece
• Battery Status : By Dual Color LED
• Calibration : Recommended every 12 months
• Dimensions : 135 x 70 x 25 mm (LxWxH)
• Supply Type : Supplier
• Power Supply : 9 V Battery
• Range Selection : By Slide Switch
• Consist of : Wrist strap tester, Yellow Wall Station, Foot Plate
• Foot Wear : 0.75 to 100 megaohm
• Test Actuation : By Pressing Metal Sensor Plate

more...

We share forefront for manufacturing & supplying of Wrist Strap Tester from Maharashtra, India. The entire product range is made as per industry-defined standards, thus optimum strength and quality are guaranteed. Buyers can consider our name for customized and timely deliveries. More about Wrist Strap Te more...

• MOQ : 2 Piece
• Modal Number : Ze102
• Operating Temperature : 0 deg C~50 deg C
• Dimensions : 135 x 70 x 25 mm
• Display Type : Digital Only
• Supply Type : Manufacturer
• Weight : 100 gms

ZE102 ESD Wrist Strap Tester ESD Wrist Strap Tester is designed for fast, frequent testing of ESD wrist straps. It is very simple to operate. A green light signals the user that everything is OK.  A red light and an audible indicator mean that the circuit resistance is either too low or too high. ESD Wri more...

We are offering wrist strap cum dual foot wear tester. our high performing wrist strap cum dual foot wear tester is in huge demand in the market owing to its high efficiency. Besides, it is long lasting and compact in size that assures convenience in shifting. more...

• Unit dimensions: : 150 x 200 x 65mm
• Supply Type : Manufacturer
• Strap Material : Polyester
• Power : Electronic
• Application : Textile Testing Instrument
• Warranty : 12 Months
• Material : Stainless Steel

more...

Wrist Straps are the first line of defence against electrostatic charges build up on the human body. They are designed to carry away this change as soon as it is generated. At the same time the strap must remain electrically safe for the user. Thus, it is important to test every strap regularly. more...