Features : 4-Digit Flow Rate display 6-Digit Total Value display Programmable conversion factor Two Flow and Batch Control Relays Floating decimal point and Roll-over record Selectable square root extractor High/Low, Pre warn and end of process set points Transmitter power supplymore...
The rs 232 serial port isolator � iso 232 m is primarily intended to provide complete isolation between expensive computer or system from the serial device, so that they are protected against any inadvertent damage due to electrical disturbances. The iso 232 m also providemore...
The input 4-20mA Signal from a transmitter is measured and converted into isolated 4-20mA Output signal which is exact replica of the input signal. The Circuit on the input side draws power from the 4-20mA input being measured and the output circuit draws power from the 4-20mA 2-more...
ESD's signal isolators are suitable for connecting field signal from sensors to PLC's with isolated ground loop. These isolators prevent noise and RFI EMI interference being transmitted to the instruments.more...
Signal isolator is a rugged 4 wire isolator available in compact DIN rail mounting enclosure designed to accept custom built and wide range of voltage and current input signals. Signal is isolated and converted to standard instrumentation signals compatible to commercially off thmore...
Features : Slim Design of 12.5mm for Single output and 17.5mm for Dual output,1.5KVAC Three Port Isolation,High CMRR and NMRR,Front calibration facility Via mutiturn Trimpot
Slim Signal Isolator 9000C is slim yet rugged 4 wire Isolator used for reliable Isolation and Attenuation of Industry Standard Field Signals. 9000C is available in Single or Dual output models. Slim Signal Isolator 9000C has higher noise rejection ratio that ensures accurate and more...
Input types : RTD (Pt-100) / 2 or 3 wire or Thermocouple (J/K/ Types – type to be specified) or mV, mA input or Load cell, pressure sensor, pH/ORP sensor etc. generating DC current or voltage. AC input - Current (through external CT) (0-1)A or (0-5)A or Voltage (0-11
Supply Type : Supplier
Range : User may specify the required temperature range (for RTD or T/C input). For other inputs the required calibration range can be specified.
Supply : 90 -260 VAC, 50/60Hz or 24VDC @ 200mA
Calibration : On site calibration facility through ZERO and SPAN presets accessible to the user.
Accuracy : For Thermocouple and RTD Input, the calibration of output is done for the best straight line fit to give accuracy of /- 0.5% of the range. For other input the linearity depends on the input signal, where output accuracy is absolute to the input.
Isolators are used to make sure that an electrical circuit can be completely de-energized for service or maintenance. Such switches are often found in electrical distribution and industrial applications where machinery must have its source of driving power removed for adjustment more...
Isolation type : Opto and Galvanic .. @ 1500 V DC minimum
Cold junction compensation : Built in for T/C input.
Analog output : Isolated / Non Isolated 4 – 20 mA DC
Pantech's Signal Isolator, model 821 is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to four output signals, each capable of driving of 80more...
Pantech's Universal Input Signal Isolator, model 821U is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to max. 4 output signals, each capabmore...
Cold junction compensation : Built in for T/C input.
Pantech's Signal Isolator, model 821 is an ideal instrument for providing isolation between input, multiple outputs and power supply. The module is an ideal choice when fanning out of process signal is required. It provides up to four output signals, each capable of driving of 80more...
Protocontrol offers signal multipliers to isolate field signals like 4-20 ma and multiply them to up to four for processing them at four different locations. Hence one 4-20 ma input can be used for location indication, remote monitoring as well as data acquisition. These multiplimore...
We offers signal isolators to isolate and convert field signals like resistance, current, voltage, frequency to 4-20 ma. These isolators find use in process control industries for signal isolation. Variety of models is available for specific applications. transmitters are the fiemore...
We are offering signal converters, isolators and transmitters to isolate and convert field signals like resistance, current, voltage, frequency to 4-20 ma. These isolators find use in process control industries for signal isolation. Variety of models is available for specific appmore...
Signal Isolator ISO102 series (single output or dual output) provides total signal isolation between a non-isolated transmitter and a receiving device. This eliminates faulty readings in process measurement and control equipment caused by ground loops, motor noise, and other unprmore...
WEIGHT
MODEL
:
1.5Kgapprox.
405 - Dual output with DIN rail housing 406 - Dual output wall mounted type with 24 v DC output 407 - Five output with DIN rail housing.
Input (Single or dual): Voltage(ACDC) Current(ACDC) Power( KWW) � Transmission OP (DualSingle): Linear current (4 20 mA) or voltage (0-10VDC) � Power supply: 230VAC or 110VAC , 50 Hz � Re transmission accuracy: 0.2%FSÃ�± 1 Digit âïmore...
Signal convertor isolator type : 4 wire input : available in rtd pt-100, tc (j, k, r, s, t, e, b) mvac, vdc, madc, ac amp, acv, resistance, pulse, frequency. Output : 4-20 ma dc, 0-20 ma dc, 0-5 v, 0-10 v, frequency no. Of output : singledual, triplequad on request isolation : opmore...
Safety and reliability have been a challenge in today�s coal fired boilers at thermal power stations. FOURESS, in technical consultation with a few discerning customers have developed the perfect solution to the pressing problem of effective isolation of PF mills. This hasmore...
Isolators & Signal Conditioners Single Input Dual Output(DIN 1X2) Signal Isolation Transmitter LOW COST INTERNALLY POWERED ISO-UPO: DC Voltage Signal (VI, VV) Isolated Amplifier IC DIN 1X1 VF Transmittermore...
We have separated our infrastructural facility into several units and one of them in warehouse. In order to maintain high quality standards, we laced our facility with modern technology. In order to attain complete client credibility, we offer several options to the clients. Alsomore...
ESD's signal isolators are suitable for connecting field signal from sensors to PLC's with isolated ground loop. These isolators prevent noise and RFI EMI interference being transmitted to the instruments.more...
Wide choice of Input Types. Software selectable mA & V output. Three Port Isolation. Linearisation of T/C and RTD inputs. Realistic Cold Junction Compensation. Fully Configurable through Keypad. Accepts non-standard Signal Inputs. Powering Options: 20-35V DC / Mains . Dual outputmore...