Rate Indicator

• MOQ : 10 pieces
• Feature : Accuracy, Easy To Fit
• Material : Alloy Steel
• Display Type : Analogue, Digital
• Application : 0-6VDC
• Certification : ISI Certified
• Voltage : 0-6VDC
• Supply Type : Manufacturer

more...

• MOQ : 1 Piece(s)
• Type : Rpm Indicators
• Brand Name : SELEC
• MODEL : RC2108

selec rc2108 rpm indicator and controller rc 2108 model: rc2108 type: rpm indicator and controller voltage: 90 - 270 vac/dc condition: used & working qty: 1 pc available  ref: al107   . more...

• Model Name/Number : RC 2108
• Typr : Electronic
• Mounting : Press Fit
• Panel Cutout : 72 x 72mm
• Frequency : 3.5kHz
• Features : Scalable input , High and low alarm , Programmable alarm delay
• Accuracy : 100%
• Dimensions : 72 x 72mm

more...

• Frequency : 50 Hz
• Type : Automatic
• Humidity : 10% RH
• Model Name/Number : FLT-23-A1
• Current : 20 A
• Brand : Anamec
• Body Material : MS
• Display Type : Digital
• Voltage : 230 V

more...

• MOQ : 4 Piece(s)
• Type : Rate And Total Indicator
• enclosure rating : nema 4x (ip67)
• Input Power : 5 V pulse or contact closure; 1 to 15 pulses/s. : Enclosure Rating:NEMA 4X (IP67)
• power requirements : 7 to 30 vdc @ 4 ma (4 to 20 ma when loop-powered)
• display : rate: 8 digits, 1/2
• output : current sinking square wave pulse: scaled pulse output (0.1 s duration 6.1 hz max. Or high alarm output or low alarm output), sensor pass-through pulse output (un-scaled); pulse output range: 0.1 to 9
• temperature limits : process: -32 to 131°f (0 to 55°c); storage: -40 to 158°f (-40 to 75°c)
• Supply Type : Manufacturer
• Material : Die-cast Powder-coated Aluminum; Faceplate #HP92W Lexan

Rate and Total Indicator series rti2 rate/total indicator loop powered, converts pulse frequency to 4 to 20 ma, high/low flow alarm the series rti2 rate & total indicator is an indicator/transmitter that takes the pulse output signal from compatible flowmeters, displays flow rate and total, and provides outpu more...

• MOQ : 10 Units.
• Power Supply : 240V
• Material : Mild Steel
• Temperature Range : 150 Degree Celsius
• Application Media : Industrial
• Application : Automotive
•   :  
• Model Name/Number : 54
• Brand : Multispan

more...

• Function : Rate Indication Only
• Indication : LED Display
• Automation Grade : Automatic
• Display Type : Digital
• Backlight. : LED
• Ambient temperature : -40°C to +80°C (-40°F to 176°F).

FEATURES Analog and Pulse outputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Displays total and flow rate simultaneously. Large digit selection for flow rate or total Various accessories are available for this product.   more...

• Totalised Reset : By Front panel touch switch
• Sensor Supply : +10V DC provided by instrument

4 digit display for Flow Rate with resolution from 0.001 to 1 6 digit totaliser for integrated flow values with resolution setting from 1 to 0.001 Multiplier programmable with resolution ranging from 0.001 to 0.00001 Input frequency range from 10 pulsesmin to 50, 000 pulsesmin Totalized flow saved in memory o more...

• Connection : Thread (M/F) or flange
• Accuracy (standard installation position) : +/- 0.5 or 1% FSD
• Maximum working pressure : 6 MPa
• Shaft : Hard Stainless Steel-316 with carbon bush
• Fluid &Ambient temperature : -20 to 120 Deg. C
• Enclosure : S.S-304/S.S-316
• Repeatability : 0.1%

ATN Instruments developed and design turbine flow meter available with varient of output : RS 484/ hart/ pulse/ current 4 -20 ma and voltage linear 0-10 vdc, conventional turbine flow sensor and meter for low viscous liquid and gas application, turbine flow sensor model number defined in two category, 1) Heav more...

• Encoders, Potential free contacts, Limit switches etc. :  
• • Scale Factor : Programmable from 0.00001 to 9.99999 × 10″
• • Accuracy : Rate 0.05%
• n = -3, -2, -1, 0, 1, 2 :  
• Range : Counter 9999.99, 99999.9 & 999999.
• • Inputs : 3-30 VDC from Flow sensors, Proximity switches,
• Rate : Auto ranging (4.00 to 9999 RPM).
• • Sensor Supply : 12V DC (±10%), 30mA short circuit protected

more...

• Material : Die-cast Powder-coated Aluminum; Faceplate #HP92W Lexan.
• Storage Temperature : -40 to 158 Degree F (-40 to 75 Degree C). : K Factor Range : 0.001 to 999999.999
• Weight : 3 lb (1361 g). : Process Temperature -32 to 131 Degree F (0 to 55 Degree C)
• Warranty : 1 YERS
• Type : Rate And Total Indicator
• Flow Alarm Output Range : 0.1 to 99999.99. : Enclosure Rating : NEMA 4X (IP67).
• Packaging Type : 1
• Supply Type : Supplier

rate and total indicator series rti2 rate/total indicator loop powered, converts pulse frequency to 4 to 20 ma, high/low flow alarm the series rti2 rate & total indicator is an indicator/transmitter that takes the pulse output signal from compatible flowmeters, displays flow rate and total, and provides outpu more...

• Inputs : 5-12 V / Potential free pulse -4-20 mA / 0-10 mA / 0-100 mV factory set -Unbalanced bridge
• Relay output : 230 V / 5A (resi)
• Display : 0.5 inch 4 digit / 6 digit or -4 + 6 digit
• Size : 96 x 96 x 100 / 150 mm
• Supply  : 230 V / 110 V AC or 24 V DC

more...

Toshniwal offers a very wide range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. The Robust IP66, IP67 (NEMA Type4X) field enclosure is extremely rugged. The indicators are available with intri more...

Features Compact 1 / 8 DIN size case Two pulse and three control inputs 2 relays (NO) of 5 A and 250 V OR 2 Open Collector Outputs; 100 mA maximum One 4-20 mA analog output RS232 / RS485 port for serial communication and printing Password security for function keys +24 VDC unregulated O/P for AC powered unit more...

Programmable Scale factor facilitates direct reading in engineering units (RPM, meters / minute etc. ), Accepts input directly from proximity switches, encoders and potential free contacts. Sensor supply to power the proximity & other sensors, Configuration lock to avoid inadvertent change in configured param more...

These units are manufactured in a wide range of sizes and specification options but all have the same basic function.A dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increa more...