Rating : Ibr Approved Ansi Class 150, 300, 600, 900, 1500 & Higher On Request.
MOC : Carbon Steel (a216 Gr Wcb) / Alloy Steel (a217 Gr Wc6) / Ss (cf8m)
options : Ibr / Non Ibr
Size : 15 Nb X 15 Nb To 300 Nb X 500 Nb And Higher Size
Operating Type : Manual
We are engaged in the designing and development of highly effectual Steam Pressure Reducing Station . The Steam Pressure Reducing Stations offered by us are made from high quality raw materials. They are properly tested on different parameters before they are supplied in the markmore...
Steam produced at a pressure in the Steam Boiler, might not be needed at that same pressure in the process machines. They need at a reduced pressure of steam to conclude the process. Here the Pressure Reducing Stations comes in handy as they help in achieving the desired steam prmore...
Thermodyne engineering systems provide steam pressure reducing stations (prs) for process application of steam at a pressure lower than that of steam generation pressure of the main boiler. Pressure reducing stations (prs) is a set of valves â that is used to provide desiredâÂmore...
Pressure Rating: : Class 150, 300, 600, BS 10 Table H, etc.
Material: : Cast Steel and Alloy Steel
Steam Service : Â Â Â SC-4001 Model (with IBR approval and certification) Complete assembled unit of pressure reducing station, sized and selected based on Customer's requirement of Flow Rate, Pressure, Temperature, etc. PRV is of Self Regulating type Model SC-4000, generally fmore...
Material : Cast Steel, Alloy Steel & Stainless Steel
Complete assembled unit of pressure reducing station, sized and selected for controlling pressure in Natural Gas, Nitrogen, Hydrogen, LPG, Air, etc. Each PRS is sized and manufactured based on customers process parameters such as Flow Rate, Inlet Pressure, Outlet Pressure, other more...
End Connections : 1†NB to 4†NB Flanged as per ANSI 150/300.
PRS/Gas Trains Design Features: PRS/Gas trains are consisting of, Ball valves: Â to isolate the system from main supply or to isolate the either side of PRS. Filtration unit: Â A filter protects rest of the system from any debris or dust that may carried with gas stream. Debris mmore...
Notes : As this system itself acts as bypass system for turbine, no bypass is required for this system again. • If condensers are equipped with safety devices like rupture discs then no extra safety devices like safety valves are necessary.
Requirements : Protection of Condenser against excessive Pressure & Temperature. • Etc
Combined angle type pressure reducing and desuperheating station These are suitable for High pressure Turbine bypass and HP LP bypass applications. We offer the same with various sizes, material and pressure class. This ensures required pressure and temperature drop.more...
Note : • Entire assembly is offered with IBR Certificate.
We also offer pressure reducing stations with pressure control systems. High quality components are used which ensure reliability of the system. These are also engineered, designed and fabricated at Forbes Marshall and duly hydrotested before dispatch.more...
Note : • Entire assembly is offered with IBR Certificate.
We also offer pressure reducing stations with pressure control systems. High quality components are used which ensure reliability of the system. These are also engineered, designed and fabricated at Forbes Marshall and duly hydrotested before dispatch.more...
We offer customized solutions with total system end to end station with all necessary mechanical and instrumentation components and take guarantee of entire control system. more...
we are engaged in the designing and development of highly effectual steam pressure reducing station . The steam pressure reducing stations offered by us are made from high quality raw materials. They are properly tested on different parameters before they are supplied in the mamore...
15 NB x 15 NB to 300 NB x 500 NB and higher size as per requirement : Rating :
IBR approved ANSI Class 150, 300 , 600 , 900 , 1500 & higher on request. : MOC :
Flanged & Butt Weld : Options :
Easy for maintenance : Size :
Features : We are your single source for stations complete with piping and instrumentation. Our stations are supplied complete and ready to fit on your piping. We have a station to suit every need. Our steam pressure reducing station are pre-fabricated manufactured ready to instamore...
Pressure reducing station, sized and selected for controlling pressure in Natural Gas, Nitrogen, Hydrogen, LPG, Air, etc. Each PRS is sized and manufactured based on customers process parameters such as Flow Rate, Inlet Pressure, Outlet Pressure, other Safety requirements such asmore...
Feature : Safety valve sized for full discharge capacity of the PRS, Designed as per best steam engineering practices, Specially designed flow divider to ensure low noise level, Both IBR certified & Non IBR PRS available
Based in Maharashtra (India), we are a top-notch Manufacturer and Supplier of PRV Stations . The PRV Stations that we make available are assembled using high-quality components as per the industry-stated norms and standards. Due to easy installation and long service life, these Smore...
Pressure Reduction Station is most popular for pressure reduction in all types of industries. Salient Features: Maintains constant pressure irrespective of demand variations Noise reduction Remote setting Offsets due to mech. friction & gland tightening are taken care by the posimore...
Scorpio Valves & Controls manufactures Steam Pressure Reducing Station. This steam pressure reducing station is manufactured in compliance with international quality standards using excellent quality raw material. This steam pressure reducing station is designed with high precisimore...
  We have the knowledge and expertise to enable you to select the right pressure and temperature control solution for your specific need. Control valves and Desuperheaters are available with various options to suit a client's requirement. more...
Steam should be distributed at high pressure as it has low volume and impacts the inventory and its cost, At the same time it should be used at low pressure, as it has high latent heat at low pressure, Thus the function of lowering the pressure at the point of use is done by the more...
Most modern boilers generate steam at high pressures & temperatures. High pressure steam has lesser volume than steam at atmospheric pressure, thereby translating into smaller boiler size & lower diameter of steam piping. Also, high temperature (superheated) steam has more energymore...
We have emerged as an eminent manufacturer, exporter and supplier of LPG Pressure Reducing Station. The offered station has been designed to control pressure of all types of inert, oxidizing and flammable gases which include LPG, Prepane, Natural Gas, Nitrogen and so on. We manufmore...
We have received wide recognition as a manufacturer, exporter and supplier of Lpg Pressure Reducing Station. This Lpg Pressure Reducing Station is required to regulate LPG, natural gas, propane, ethylene, air and other gases in an effective manner. Known for its international stamore...
Our Steam Pressure Reducing Stations are Pre-fabricated Manufactured ready to install units for steam system management. The Pre-assembled steam pressure reducing stations are individually size to meet end-user’s specific needs. Inlet & Outlet Piping & Valve are sized as per bemore...
We also offer pressure reducing stations with pressure control systems. High quality components are used which ensure reliability of the system. These are also engineered, designed and fabricated at Forbes Marshall and duly hydrotested before dispatch. Assured accurate consistentmore...
We are offering pressure reducing stations. Designed to maintain a constant flow of gas at a particular temperature by compensating variation of pressure. more...