Intrinsically safe multifunction process calibrator Meets I.S. Class I, Division 1 Groups B-D, 171°C compliance standards Measures volts DC, mA, RTDs, thermocouples, frequency, and ohms Sources or simulates volts DC, mA, RTDs, thermocouples, frequency and ohmsmore...
9V Eveready Type 216 or Equivalent & External Battery Pack (6 x 1.5 V AA Batteries), 4 and 5 Digits with Annunciator, Operating Environment :- 0 ºC to 50 ºC (32 to 122 ºF), RH < 85%.more...
4 - 20mA (1KΩ Load, 24V Loop Supply) with1mA Resolution 0 -100.00mV, 0-1.0000V, 0-12.000V K, J, E & T Thermocouples (°C and °F) Frequency : 1-62500 Hz DC Current Basic Accuracy : 0.025% Easy Key Pad Number Operation Easy Step and Auto Ramp Functions 0-20mA & 0-24mA Selectable more...
Powerful productivity in your hands, the modular DPI 620 Genii delivers a range of calibration tasks, in one compact hand-held system. Unique among calibrators, the DPI 620 Genii is driven by a touch and swipe interface, making it faster and simpler to access every function in thmore...
The Beamex MC2 series includes three different hand-held calibrators for field use: the MC2 pressureelectrical calibrator, the MC2 temperatureelectrical calibrator and the MC2 multifunction calibrator. The MC2 is a compact and easy-to-use hand-held calibrator. It has a large grapmore...
The ATEX and IECEx certified MC5-IS is designed for use in potentially explosive environments, such as offshore platforms, oil refineries, chemical and petrochemical plants where inflammable gases may be present. There is probably no other intrinsically safe calibrator that can omore...
Overload and short circuit protection, Pure Sine wave with variable frequency, Setting by Multi turn potentiometers for VA in 4½ digit MFC, Frequency setting by potentiometer, Parameter and range selection by inbuilt micro controller based unit and relays. Bar of LEDs to indicatmore...
Features : high accuracy and stability, which can provide powerful measurement or output functions & other special functions to meet all the calibration work for field process control.
Calibration of AC Volt, Amp, Frequency Meters Calibration of DC Volt, Amp Meters Calibration of Resistance Meters, Insulation Testers Features: Stability DC : Ripple : Power Supply : 230 VAC, 50 (60) Hz Power Consumption : Relative Humidity : ≤ 80 % Distortion : Displamore...
412400 multifunction process calibrator sources and measures thermocouples (j, k, and t), ma, mv, and v devices. The 24v loop supply drives current loads up to 1000 ohms. Memory for 5 user settable output values of each type for fast calibrations. Single/continuous step function more...
By making use of streamlined packing system, we become capable of meeting the bulk and customized packing requirements of the clients. Moreover, we ensure complete safety of the orders. In order to ensure complete satisfaction of the customers, we deliver the orders on the schedumore...
We are offering vaiseshika multifunction process calibrators. Description universal multifunction calibrators are used for the simultaneaous simulation and measuring of programmable test points. Thermometers, signals for thermocouple, rtd's, resistance, ma, mv, voltage, frequencymore...
The Fluke 725Ex intrinsically safe multifunction process calibrator meets ATEX II 1G EEx ia IIB 171 °C KEMA 04ATEX 1303X safety standard and I.S. Class I, Division 1 Groups B-D, 171 °C compliance. It's rugged and reliable for field use and has a simple, push-button user interfamore...
Cold Junction Compensation : 0.02°F per °F (0.03°C per °C)
Display : Dot matrix LCD
Current Output Capability : 24mADC at 1000 ohms
Thermocouple Standard and Scale : IST 175, ITS-90
Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N), CJC - Cold Junction Compensation function, Palm-sized double molded housing and large dot-matrix backlit LCD, High accuracy calibration function simulates precision thermocouple outputs for use in calibramore...
Application : Calibration Laboratory ,production Industries , Institute, Testing & measuring systems, Research Industries, Chemical and aero space , Automotive Industries etc…
Multifunction Process calibrator source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available models 11, 14, 15 Series Adopt ITS 90 Temperature Scale Used 6 digit LCD display with backlight Good accuracy 0.02 %, Bamore...
Application : Calibration Laboratory ,production Industries , Institute, Testing & measuring systems, Research Industries, Chemical and aero space , Automotive Industries etc…
Multifunction Process calibrator source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available models 11, 14, 15 Series Adopt ITS 90 Temperature Scale Used 6 digit LCD display with backlight Good accuracy 0.02 %, Bamore...
4~20mA (1KV Load, 24V Loop Supply)with 1 A Resolution • 0-100.00mV, 0-1.0000V, 0-12.000V • K, J, E & T Thermocouples ( ºC and ºF) • Frequency: 1-62500 Hz • DC Current Basic Accuracy: 0.025% • Easy Key Pad Number Operation • Easy Step and Auto Ramp more...
Simply Powerful! The new Fluke 725 Multifunction Process Calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. MEASURE & SOURCE more...
The new fluke 725 multifunction process calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. more...
The new Fluke 725 Multifunction Process Calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. more...
The ATEX and IECEx certified MC5-IS is designed for use in potentially explosive environments, such as offshore platforms, oil refineries, chemical and petrochemical plants where inflammable gases may be present. There is probably no other intrinsically safe calibrator that can omore...
Practicality in calibration. The Beamex MC2 series includes three different hand-held calibrators for field use: the MC2 pressureelectrical calibrator, the MC2 temperatureelectrical calibrator and the MC2 multifunction calibrator. The MC2 is a compact and easy-to-use hand-held camore...
the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate tramore...
Presenting Multifunction Calibrators that are of top quality. We are one of the best known and trusted manufacturers, exporters and suppliers of Multifunction Calibrator all over the country. The Multifunction Calibrators manufactured by us are made from superior grade material. more...
Owing to our vast manufacturing facilities, we are able to offer Multi Function Calibrator. The MFT 4010 is a break-through combination calibrator HART communicator that truly reduces the time spent on field calibrations. Our offered MFT 4010 Series deliver the versatility of a cmore...
Universal calibrator for all instrument types--13 Thermocouples & 5 RTD types Ergonomic design and carrying case - easy to carry into the field Documenting capability -- eliminates inconsistency, automate process HART capability -- trim instruments while verifying calibration NISmore...
Owing to our vast manufacturing facilities, we are able to offer Multi Function Calibrator . The MFT 4010 is a break-through combination calibrator / HART communicator that truly reduces the time spent on field calibrations. Our offered MFT 4010 Series deliver the versatility omore...
We are offering universal multifunction process calibrator. Universal multifunction calibrators are used for the simultaneaous simulation and measuring of programmable test points. thermometers, signals for thermocouple, rtd's, resistance, ma, mv, voltage, frequency is available more...
The MFT 4000 Digital Calibrator is a base unit for pressure calibration work with selected NIST traceable sensor modules & integral voltage/current meter. The MFT 4010 Digital Calibrator with HART® is a base unit for modules and full device specific HART® communications. Quick more...
Multifunction Process calibrator source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available models 11, 14, 15 Series Adopt ITS 90 Temperature Scale Used 6 digit LCD display with backlight Good accuracy 0.02 %, Bamore...
Measure to 40V, 400mA, 40kΩ Output voltage up to 10V Output current to 20mA Output resistance to 40kΩ Accuracy 0.03% of range Thermocouple measure & simulate RTD measure & simulate: PT100 more...
We manufacture and supply Multifunction Process Calibrators . These handheld devices are battery operated and ideally designed for measurement of electrical and physical parameters. It is an all-in-one instrument that can serve as multimeter, thermocouple, and can also be used tomore...