Features : Onboard the EPM240T100C5N chip.EPROM chip configuration using EPCS4, the size of 8Kbit.Onboard 50M active patch crystal (Crystal Slaughter halfback).
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.Digital I/O Pins 14 (of which 6 provide PWM output).Analog Input Pins 6.DC Current per I/O Pin 40 mA.DC Curmore...
Feature : Operating voltage 3.3V Input voltage - 3.3-9V Digital I / O - 14 (6 PWM) RAM - 2 Kb
Adraxx Pro Mini board is more suitable for applications and installations where space is premium and projects are made as permanent set ups. This board is a 5 V version, powered by ATmega328. Power The Adraxx Pro Mini can be powered with an FTDI cable or breakout board connected more...
Feature : Orignal and Brand new product Especially designed for Arduino beginners
The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital inputoutput pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP headermore...
Features : 256k Flash Memory,16Mhz Clock Speed,16 Analog Inputs etc.
The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital inputoutput pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a more...
Arduino UNO is upgrated version of arduinoDuemilanove. It use ATmega8U2 as replacement of FT232RL. Besids USB-UART bridge, it can also be configuraed as mouse, joystick, keyboard or camera. FeaturesMicrocontroller ATmega328Operating Voltage 5VInput Voltage (recommended) 7-12VInpumore...
Arduino Uno is a microcontroller board based on the ATmega328P  (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset bmore...
Specification : Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) Etc.
The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics. It's plug anmore...
Features : 14-/20-pin DIP (N) socket Built-in flash emulation for debugging and programming, 2 programmable LEDs, 1 power LED, 1 programmable button, 1 reset button..!!
The MSP430 LaunchPad is an easy-to-use flash programmer and debugging tool for the MSP430G2xx Value Line microcontrollers. It features everything you need to start developing on an MSP430 microcontroller device. It has on-board emulation for programming and debugging and featuresmore...
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything more...
ILPMCSPRO is a Device Programmer Board for Programming the flash memory of major Atmel 89 Series Microcontrollers, Ideally suited for Project Deployment .Simple to use & low cost, yet powerful flash microcontroller programmer for the Atmel 89 series. It will Program, Read and Vermore...
Package Includes ·    Fully Assembled and Tested Development Board with Xilinx XC2C128-VQG100C  CPLD core processor ·       Parallel Port JTAG Cable for program downloading. ·       CDROM containing XILINX ISE - Programming Software and User Manumore...
Package Includes ·        Fully Assembled and Tested Development Board with LPC1114 Microcontroller ·        Serial Port Cable for PC interfacing and programming ·         CDROM containing Flash Magic – Programming Software and User Manual Introdumore...
The arduino uno is a microcontroller board based on the atmega328 (datasheet). It has 14 digital input output pins (of which 6 can be used as pwm outputs), 6 analog inputs, a 16 mhz ceramic resonator, a usb connection, a power jack, an icsp header, and a reset button. It containsmore...
We are offering arduino due. The arduino due is a microcontroller board based on the atmel sam3x8e arm cortex-m3 cpu (datasheet). It is the first arduino board based on a 32-bit arm core microcontroller. It has 54 digital input & output pins (of which 12 can be used as pwm outputmore...
We are offering fio (arduino). The arduino fio is a microcontroller board based on the atmega328p (datasheet) runs at 3.3v and 8 mhz. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for more...
Digital io pins : 14 (of which 6 provide pwm output)
Input Voltage : 7v -12v.
Color : Green
Operating Voltage : 5v
Analog input pin : 6
we are offering areduino usb + atmega 328. areduino usb + atmega 328 board is a microcontroller board based on the atmega328. it connects to the computer with a standard usb cable and contains everything else you need to program and use the board. areduino usb + atmega 328 more...