Micro Coil Heater

• MOQ : 5 Piece
• Material : Steel
• Supply Type : Manufacturer
• Power Source : Electric
• Shape : Round
• Features : Anti-corrosive, Perfect Finish, Minimum Maintenance
• Frequency : 50/60 Hz
• Finishing : Polished
• Color : Silver

more...

• Min. Coiling ID : 8 mm
• Max. Sheath Temperature : 750 ° C / 1380 ° F
• Sheath Material : Stainless steel or Nickel
• Wattage : ± 10 %
• Max. Straight Length : 2000 mm
• Insulation Resistance : ≥ 5 MΏ at 500V (DC)
• Max. Surface Load : 4 W/sq. cm or 25 W/sq. inch

The Controlled atmosphere annealing at the end of the manufacturing process allows the bending of this type of Micro Coil Heater into very complex shapes with extremely narrow bending radius. Passing through this process helps the Micro Coil Heater have total flexibility in the distribution of heating density more...

• Max. Straight Length : 2500 mm
• Insulation Resistance : ≥ 5 MΏ at 500V (DC)
• Max. Surface Load : 15 W/sq. cm or 100 W/sq. inch
• Diameter Tolerance : ± 0.15 mm
• Length Tolerance : ± 5%
• Voltage : Upto 250V
• Thermocouple : Type J / K
• Wattage : ± 10 %
• Section : 3.3 , 4 , 3 x 3 , 4 x 4 , 2.2 x 4.2 , 4 x 6 , 4.6 x 8.6
• High Voltage Test : 800V (AC)

The resistive wire is uniformly distributed in a compacted MgO insulation, with a CrNi-steel outer protection sheath.The heaters are annealed after manufacturing, thus acquiring a high malleability that allows their being subsequently bent into any complex shape, with extremely narrow bending radius Applicati more...

• diameters : 1.3 x 2.1

Micro Tubular Coil Heaters are manufactured in Round & Rectangular section. In round section available diameters are 1mm, 1.5mm & 1.8mm. In rectangular section available diameters 1.3 x 2.1. These heaters are swaged and compacted to these diameters and fitted into special clamps to tighten over circulars part more...

• diameters : 1.3 x 2.1

Micro Tubular Coil Heaters are manufactured in Round & Rectangular section. In round section available diameters are 1mm, 1.5mm & 1.8mm. In rectangular section available diameters 1.3 x 2.1. These heaters are swaged and compacted to these diameters and fitted into special clamps to tighten over circul more...

• Square Size : 3.3*3.3,4*4 MM
• Cross Section-Round Size : 3.8,6,6.8,4 MM

Micro Tubular Coil Heaters are small section heating elements that can be shaped in small space which allows high wattage in small space .Heater are in round , square or rectangular section .These Heaters are designed to work in most difficult condition giving very good heat transfer and good reliability. more...

• Rectangular Size : 4.2*2.4,4*6.5,8*86.6*6.6 MM
• Cross Section-Round Size : 3.8,6,6.8,4 MM
• Square Size : 3.3*3.3,4*4 MM

Micro Tubular Coil Heaters are small section heating elements that can be shaped in small space which allows high wattage in small space .Heater are in round , square or rectangular section .These Heaters are designed to work in most difficult condition giving very good heat transfer and good reliability. more...

Micro Coil Heater is a high performance heater for smaller diameter Nozzles and Nozzle Tips that can also be formed in grooves to create three dimensional heating applications. Owing to their small cross-sectional dimensions, Micro Coil Heater is most often connected at both ends and do not permit the integr more...

Anupam Electroheat’s Micro Tubular Coil Heater is a small, linear heating element that can be formed into different shapes and configurations. Also known as a Hot Runner Heater for its extensive use in Hot Runner Systems, the Micro Tubular Coil Heater is a high performance heater which allows high wattage i more...

Abtech offers Micro Tubular Heater which are adapted to a variety of applications. This is because it can be formed into any shape. Micro Tubular Heaters are swaged and compacted with magnesium oxide and a helical or straight resistance element. These heaters are used in tight spaces. In built thermocouple li more...

Micro coil heater are adapted to a variety of applications. This is because it can be formed into any shape.• 360° heated area • Readily conforms to surface • Fast response and quick heat transfer • Helical coil design for superior performance • Resistance to corrision • Available with thermocoup more...

Features Higher Watt density Built in type J or K thermocouple Max operation Temp 800 C Even Temp profile Max. heat transfer due to more contact area Max. total length upto 3000 mm Specification Standard size for coil heaters Round : 3, 4, 4.5, 5 mm dia Square : 3x3, 3.2x3.2 Flat : 2.2x4.3, 2.5x4.3, 2.5x4.5, more...

Features Higher Watt density Built in type J or K thermocouple Max operation Temp 800 C Even Temp profile Max. heat transfer due to more contact area Max. total length upto 3000 mm Specification Standard size for coil heaters Round : 3, 4, 4.5, 5 mm dia Square : 3x3, 3.2x3.2 Flat : 2.2x4.3, 2.5x4.3, 2.5x4.5, more...

Coil Heaters: The versatile Lakshmiheaters Coil Heaters Micro tubular heaters can be formed into a variety of shapes to fit into many applications. Lakshmiheaters Manufacturers & Exports Coil Heaters, Injection molding heaters, Injection molding heating Elements, Coil heater elements, Mould heaters, Runner He more...

Coil Heaters Micro tubular heaters can be formed into a variety of shapes to fit into many applications. Lakshmiheaters Manufacturers & Exports Coil Heaters, Injection molding heaters, Injection molding heating Elements, Coil heater elements, Mould heaters, Runner Heaters, Mini coil heaters. more...

Faster Heat Transfer with flat cross section Two standard diameters, 1.5 mm and 1.8mm tube (1.40mm x 2.20mm) (0.059” & 0.07”) Standard wattage available 149 watt & 268 Staggered cold leads of 5” & 7” watt on 240 volt Std. size available ID 19mm x 30 & ID 22mm x 30 Robust Construction in Micro Tube Dia more...

Clients can avail from us Micro Tubular Coil Heaters, designed with 40 years of experience, for superior performance and life expectancy. Micro Tubular Coil Heaters that we offer provide the extreme physical strength, good emissivity & excellent thermal conductivity to heat hot runner bushing / nozzles pr more...

Electrons Micro Tubular Heaters are manufactured in round, square or rectangular section to guarantee the greatest thermal exchange keeping an excellent efficiency and a good reliability. These heaters can be manufactured with built in thermocouple J or K type. Features A very wide contact surface results in more...

Coil heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also availa more...