Joint Meter

• Shape : Round
• Diameter : 5-15 mm
• Operating Temperature : -10 to +70 Degree C
• Material : Stainless Steel
• Supply Type : Manufacturer

more...

• MOQ : 1 Piece(s)
• Material : Stainless Steel
• Type : Joint Meter
• Feature : Durable
• Warranty : 1 Year
• Supply Type : Manufacturer
• Finishing : Polished

Model SIS -120 Jointmeter are used to measure movements across surface cracks or joints in structures, concrete or rock. The Jointmeter incorporates vibrating wire sensor with the resonant frequency of vibration of a tensioned steel wire is proportional to the strain or tension in the wire. This fundamental r more...

• MOQ : 5 Set(s)
• Brand Name : Innovative Geotechnical Instrumentation
• Model : IG 1002

more...

• MOQ : 50 Pieces
• Standard Ranges : 50mm, 100 mm , 150mm.
• Thermistor : YSI 44005 or equivalent(3k Ohm @ 25°C)
• Coil Resistance : 140 – 160 Ohm @ 25°C
• Non-linearity %fs : 1%fs
• Material (outer body) : Stainless steel
• Cable : 1m , 4 core shielded.
• Supply Type : Manufacturer
• Operating Temperature : -10 to 60°C
• Surge Arrestor : Citel 90V Gas Discharge tube

Push-In type Displacement Transducer/ Crack meter Model IG-2002 & Perimetric Joint meter Model IG-2002 XYZ The model IG2002 crackmeter consists of a spring loaded, compression type vibrating wire displacement transducer and two installation brackets. One mounting bracket supports the displacement transduc more...

The Model 4400 Embedment Jointmeter is designed for use across construction joints, such as those between adjacent blocks in a concrete dam. It is normally embedded across the joint to monitor the expansion or contraction of the joint. The use of internal universal joints allows for a degree of shearing motio more...

• Accuracy : ±0.5%FS
• Range : 50mm and 100mm
• Temperature Range : -10 to +70°C
• Material of sensor : Stainless steel

The VW embedment jointmeter is used to monitor movement at joints in mass-concrete structures such as abutments, foundations, and dams. more...

• Operating Temperature : -10 to +70°C
• Reading Tool : Digital Depth Gauge
• Accuracy : ±0.2%FS,
• Range : ±10mm, ±25mm, ± 50mm

Mechanical triaxial jointmeter is used to monitor the relative displacement of two adjacent surfaces in three orthogonal directions. The data is being recorded using digital depth gauge manually. more...