Infrared Proximity Sensor

• Signal Type : Digital signal
• Operating Temperature : -15~60 ℃
• Storage Temperature : -25~75 ℃
• Detection range : 0~200 cm
• Output Form : PNP normally open
• Humidity : 35% ~ 95% RH
• Size : 75 * Φ18 mm
• Interface : XH2.54-3Pin
• Temperature Effect : Within -15 ℃ to + 60 ℃, the detection distance is below 10% at + 25 ℃
• Switch Level : 0, No obstacles in the area; 1, There are obstacles in the area.

more...

• Switching Mode : NC
• Supply : 6 to 16VDC , 5 ± 0.2VDC
• Operate Current : 0.5Amp
• Sensed Current Type : AC, DC
• Sensing Distance : 4 mm
• Operating temperature : -25°C to 85°C [-13°F to 185°F]
• Output Current : 20mA
• Response Tim : 100μs

more...

• Sensing Distance : 2 to 30 cm
• Features  : Easy to assemble and use, Onboard detection indication, Effective distance range of 2cm to 80cm, A preset knob to fine-tune distance range
• Comparator chip : LM393
• Board size : 3.1 x 1.5 cm
•   :  
• Supply Voltage : 3.3 - 5 V DC
• Brand Name : SE
• Detection angle : 35 Degree

more...

• Body Material : PCB
• Number of Wires : 4 Wires
• Connection Type : Connector M12
• Mounting Hole diameter : 2.5 mm
• Supply Type : Supplier
• Supply Voltage : 5 V DC
• Detection Range : 5 cm

more...

• Brand : S Control
• Hysteresis : Less Than 10%
• Supply Voltage : 220-240 V
• Body Style : Rectangular
• Operating Temperature : -25 Degree C + 70 Degree C
• Body Material : Plastic
• Sensing Distance : 2 - 10cm
• Supply Type : Supplier
• Power Drain : Less Than 15 mA

more...

• MOQ : 10 Piece
• Application : Object Sensing
• Technique : Infrared
• Sensor Type : Photoelectric
• Range : 5 mtr
• Type : PNP/NPN
• Current Rating In Amps : 300 mA
• Current Rating : 300 mA
• Brand : Samrat
• Accuracy : +/-5%

more...

• MOQ : 1 Piece(s)
• Infrared IR Proximity Sensor Module : Sky Blue

description:- this is a multipurpose infrared sensor which can be used for obstacle sensing, line sensing, etc. And also as an encoder sensor. The sensor provides a digital output (1 or 0). The sensor outputs a logic one (+3.5v) at the digital output when an object is placed in front of the sensor and logic z more...

• Detection Range : 50 - 80 cms
• Dimensions : 17 cms
• Diameter : 17MM
• Model Number :  E18-D80NK

more...

• MOQ : 5 Piece
• Min Time Delay : 1 Second
• Ip Rating : IP 20
• Detection Range : 180 Degree - 360 Degree
• Usage/Application : Wardrobe, Cabinets Lights Auto On, Off
• Rated Load : 500w-200 W
• Power Source : 220-240V/AC
• Power Consumption : Approx 0.7W
• Detection Distance : 100-150mm
• Rated Current : 5 A

more...

• MOQ : 1 Piece
• Board size : 3.1 - 1.5 cm
• Brand Name : KTRON
• Supply Type : Supplier
• Detection angle : 35 Degree
• Voltage : 3.3 - 5V
• Weight : 30 gm

more...

• Packaging Type : Box
• Infrared Sensor Switch : 3- 80 cm
• Model Name/Number : E18D 80NK
• Features : Diffuse reflective type. Digital output. Adjustable detection distance. Low consumption. Compact size.
• Usage/Application : Position Sensor
• Operating Temperature : -40 Degree C~ 85 Degree C
• Detection distance : 3 mm
• Voltage : 5V~ 30V

more...

• Body Style : Cylindrical
• Supply Voltage : 5 V DC
• Body Material : Plastic
• Sensing Distance : 2 - 10cm
• Response Time : 2 ms
• Connection Type : Cable
• Supply Current DC : < 25 mA
• Lead Length : 45cm
• Number of Wires : 3 Wire
• Diameter : 17mm

more...

• Current Rating : 300 mA
• Sensing : 400 mm
• Country of Origin : Made in India
• Brand Name : Dolphin Proximity Sensor
• Voltage : 10-35 VDC
• Item Model Number : Photo Electric Sensor
• Detection Range : 300 mm

more...

• I Deal In : New Only
• Application : industrial
• Country of Origin : Made in India

more...

This is a multipurpose infrared sensor which can be used for obstacle sensing, line sensing, etc. and also as an encoder sensor. This is a multipurpose infrared sensor which can be used for obstacle sensing, line sensing, etc. and also as an encoder sensor. The sensor provides a digital output. The sensor out more...

The sensor provides a digital output. The sensor outputs a logic one (+3.5V) at the digital output when an object is placed in front of the sensor and logic zero (0V), when there is no object in front of the sensor. An onboard LED is used to indicate the presence of an object. This IR PROXIMITY OBSTACLE SENSO more...