RAILWAY TICKET AGENT ID PROVIDING AND MANAGED BY PAYPOINT INDIA . IN THIS PACK YOU WILL GET AEPS, RECHARGE, BILL PAYMENTS AND MORE SERVICES OF RETAILERS FREE.more...
Mootek Technologies We are leading in manufacturing and supplier of Touch Screen Kiosks in Chennai, Tamilnadu, India.Avail from us a wide range of Touch Screen Kiosks. KIOSK supports a full Retail kiosk solution portfolio, with proven platforms in: Lockers for Delivery / Phone Chmore...
Product Type : Automatic Identification Tracking System
We are offering automatic identification tracking system. ais is the mariner's most significant development in navigation safety since the introduction of radar. The system was originally developed as a collision avoidance tool to enable commercial vessels to ‘see' each other mmore...
We are offering automatic identification system. These are some of the features of automatic identification system: safety — see and be seen using your on-board chart plotter display graphically ais target overlay on standard radars and multifunction chart displays wireless excmore...
The SPI-II is an instrument which enables remote identification of A-B-C electrical phases from all 50 and 60 Hz networks. Besides doing identification, the instrument enables verification of phase concordance and rotation in all safety and on any network points. more...
Animal identification system meditech technologies india pvt. Ltd is the largest manufacturer and exporter of animal identification system. For identification of experimental animals. Ear punch: ear punching is commonly used for identification of small laboratory rodents and invomore...
benefits : Transparent waste disposal and billing Legally binding and direct information in the event of inquiries from citizens
With the MOBA identification systems, municipalities and commercial waste management contractors can structure waste disposal transparently, and fairly. In combination with a weighing system, it is possible to charge fees according to weight. This type of billing provides incentimore...
Radio Frequency Identification System (RFID) consists of three major components i.e. RF Reader, RFID Transponder (Tag) & Antenna System. The Reader generates eletromagnetic signals and transmitted through in built Antenna which interact with Transponder (Tag), if it lies in its pmore...
Power Supply : 120 VAC / 220 VAC versions available (must specify)..
Automated Microbiology Detection System No sample preparation or visual interpretation of results required, Initiate a test anytime, with automatic reporting of results that are sent directly via email notification to any device immediately upon detection, Simple operation that dmore...
Standalone ID Time & Attendance Terminal with Access Control Users: 30, 000 Cards Transaction: 1, 00, 000 Logs CPU: 32 bit High End Microprocessor – 800 MHz Identification speed: more...
Block Format - Non-interchangeable Display Type - Touchscreen Shipping Condition - Room Temperatur Smaller foot print: 27 W x 50 D x 40 H cm, designed to maximize horizontal and vertical bench spacE Front-facing fully motorized block more...
Standard Functions : Automatic Status Switch, Self-Service Query, Work Code, SMS, DST, T9 Input, 9 Digit User ID, Scheduled Bell, Photo ID Access Control Interfaces for
Identification systems are used for object identification. They can be used to automate manufacturing processes and to control the entire logistics of merchandising management through flexible networking. This reduces throughput times and makes variant manufacturing more flexiblemore...
The VCI-3™ is a cable identification and phasing system used during installation or maintenance works on de-energized three phase systems. FEATURES Unique balanced injection system that eliminates signal bleeding on other wires Three different frequencies to identify each phasemore...
The LCI™ is intended for energised cable identification on secondary and primary circuits. It features a dual frequency technique that eliminates false identifications. The LCI™ is designed to be easy to use, safe for the user and cost-effective. FEATURES Dual frequency efficmore...
Fame (fatty acid methyl ester) analysis is a phenotype approach and the only commercially available microbial identification system that uses cellular fatty analysis by gas chromatography (gc-fame). Researchers have identified microbes using gas chromatography analysis of cellulamore...
Midi sherlock® mis is unique in that it can be used for fatty acid analysis (e.g. Soil plfas, edible& fish oils), soil microbial community analysis, mycobacterial identification, fire debris analysis, polyphasic analysis with sherlock dna (microbial id) and microbial identificatmore...
This project is aimed to design a railway accident identification and alerting system by using wireless communication GSM technology. A GSM modem provides the communication interface. It transports device protocols transparently over the network through a serial interface. A GSM more...
Global Positioning System (GPS) satellites broadcast signals from space that GPS receivers, use to provide three-dimensional location (latitude, longitude, and altitude) plus precise time. GPS receivers provides reliable positioning, navigation, and timing services to worldwide umore...
This project is aimed to design a generalized identity system for student ID and bus pass instead of two different cards, using RFID technology. Radio Frequency Identification (RFID) Card Readers provide a low-cost solution to read passive RFID transponder tags up to 2 inches awamore...
With many years of experience in industrial sensor technology and factory automation, Pepperl+Fuchs is your specialist for identification systems. Identification systems from Pepperl+Fuchs enable more cost-effective information capture in production and logistics, as well as enhamore...
» Operation on battery mains supply. » Identification of required cable from bunch of cables. » Suitable for single or multi core armoured or unarmoured cables. » 100% fail safe identification of power cables. » High impulse current to offer reliable results. » Six sensitivmore...
Our entity is counted amongst the leading Manufacturers and Suppliers of Caller ID System . It is manufactured under the observance of our expert professionals, who check all the systems on the basis of various quality parameters. Our Caller ID System is available at a pocket-frimore...
Cable Identification System can be effectively used to identify any power cable low, medium, high or extra high voltage single or multi core cable of any grade, size and insulation in any power distribution networks companies. Key Features Identification of wanted cable from the more...
The Biolog Microbial ID System can rapidly identify over 2, 500 species of aerobic and anaerobic bacteria, yeasts and fungi. These easy to use systems provide reference laboratory quality identifications. Biolog Systems do this without the labor-intensive requirements of conventimore...
We are offering biometric identification systemface recognition time attendance system iface is unique facerecognition access control system from bi enable technology leader in the time attendance and access control ystem.this face & fingerprint time attendance system iface latesmore...
We offer baby footprint identification system. Identification of new born baby’s is one of the main tasks of the medical team following birth. Especially in developing countries, where security in public maternity wards is not very tight, and overcrowding is common, the risks omore...
NAC 2500 plus designed and produced using outstanding fingerprint recognition technology, NAC2500 plus fingerprint recognition Access control & Time Attendance system is capable of speedy and accurate authentication of fingerprint data. With this product have we made it possiblmore...
All Biolog Microbial Identification Systems viz., Manual, Semi-automated or Fully-automated use the powerful new GEN III MicroPlate, thus allowing users to choose the most appropriate system that fits their current budget and level of throughput without any compromise in technolomore...
Benefits: * Color TFT Screen with GUI interface for each. * Reads fingerprint and or PINS. * Built-in serial and Ethernet ports. * Multilanguage support. more...
Specifications Landmark Electronics is into business of Fingerprint identificaiton system, Biometric time attendance system, Attendance machine. Landmark Electronics is into business of Fingerprint identification system, Biometric time attendance system, Attendance machine , Thummore...
Features : Identification of the criminals, who left the palm latents at the scene of crime committing. Identification of the unidentified corpses, including the ones killed in the acts of terrorism, catastrophes or natural disasters. Identification of individuals being in the Inmore...
FACE IDENTIFICATION WITH BIOMETRIC SYSTEM ACCESS CONTROL Features TI DM CPU 600MHz 1000 Face, 10000 Cards User Capacity 150, 000 Records Capacity Specialized double sensor Tamper Security Alarm Built-in relay Access Control 4*4 Touch Keypad more...
FACE RECOGNITION TIME & ATTENDANCE CONTROL Features Using high – definition & dual camera 2 Ultra bright Infrared lamps ID Card / Mifare card function Color 2.8 inch TFT LCD Display 16 Keys with Touch Key Two (Red Green) LED lamp Professional access control Supported more...