Item Code: SSI-21 Type SSI-21 is Single-coil conical Spring Unbalanced Seal. The SSI-21 series seal are extremely rugged & reliable & therefore used in wide range of sealing applications. These Seals have very few parts & hence can be easily assembled or dismantled. The sealsmore...
CONICAL SPRING SEALS Conical Spring Seals are extremely rugged & reliable, therefore it is used in a wide range of sealing applications. It can be easily assembled or dismantled. The seal arrangement does not require any modification, in case of conversion from gland packing more...
Single Spring Seal SCV 120 Series ‘V’ Packing & SCO 130 Series ‘O’ Ring are single helical coil spring, bi-directional seals developed for dirty media & clogging applications. Torque transmission from drive collar to spring holder seal rings is donmore...
Applications : Light Abrasive Slurry, Light Sewage Water, High Viscosity Fluids General and Light Chemicals & Hydrocarbons.
Pressure : 10 Bars (max))
Temperature : -45 to +180°C
Velocity : Up to 20 m/sec
Wave Spring Unbalanced Seal WSU 300 Series & WSU 310 Series are single wave spring seals suitable for most general applications. Advantage of these seals is due to use of single wave spring. Seal is of compact design with reduced axial length. These seals can also be used in more...
Applications : Used in Water Pumps, Circulating Pumps for Central Heating, Chemical Pumps, Sewage & Submersible Pumps.
Pressure : 10 Bars (max))
Country of Origin : India
Velocity : Up To 20 M/sec
Conical Spring Seal CS 100 Series is a conical helical spring, unbalanced seal with ‘O’ ring as secondary sealing member. Various seal face & elastomers can be offered for different service applications. As the torque transmission is done by the conical helical spmore...
Compact design Economical Application : Water and Solvents These are conical spring, uni-directional seal, relatively small cross section allows the seal to fit into narrow stuffing box. Simple design makes the seal maintenance friendly and economical.more...
Features & Advantages : Rotating conical spring pusher seals. Unbalanced inside mounted seals. Developed for water, oil & light duties applications. Independent of direction of rotation.
Conical Spring Seal (LIE/704): These seals are suitable for gear pumps, water, submersible and monoblock pumps and marine products. Single coil with a conical unidirectional springs are used which is self cleaning and highly dependable in arduous services. The flexible duck bellomore...
These seals are suitable for gear pumps, water, submersible and monoblock pumps and marine products. Single coil with a conical unidirectional springs are used which is self cleaning and highly dependable in arduous services. The flexible duck bellow is excellent for self alignedmore...
We offer high quality conical spring seals and have carved a niche for ourselves in this market category. Our comprehensive range of these seals is extremely rugged and reliable and hence used for various sealing applications. It's a uni-directional seal design used mainly in abrmore...
We are offering conical spring seal. Meeting the expectations of the clients, we offer premium conical spring seal . Our conical spring seals are used in industries for fitting in pumps of different types. These conical spring seals can withstand high temperature and pressure conmore...
Seal face : Special cast steel, Silicon carbide , Ceramic
Seat : Carbon, Silicon carbide*, Ceramic, Special steel.
Features For plain shafts Single seal Unbalanced Rotating conical spring Dependent on direction of rotation Operating Range Shaft diameter: d1 = upto 80 mm Pressure: p1 = 12 bar Temperature: t = -20 °C to +140 °C Sliding velocity: vg = 15 m/s Advantages Universal applicationmore...
“Mechanical Seal - Conical Spring Seals" are extremely rugged & reliable & therefore used in wide range of sealing applications. these seals have very few parts & hence can be easily assembled or dismantled. The seals arrangement does not warrant any modification even in case omore...
Conical Spring Unbalanced Seals "Conical Spring Mechanical Seals" are extremly rugged & reliable & therefore used in wide range of sealing applications. These seals have verry few parts & hence can be easily assembled or dismantled. The seals arrangement does not warrant any modimore...
The Clockwise rotating shaft required Right hand spring & the Anti Clockwise rotating required Left-hand spring. The rotating shaft transmits the drive to conical spring. The seal are easy to fit & pushed with shaft step or drive ring supports. This seals are comfortable to used more...
Secondary Seal Material : Viton, NBR, EPDM, Sillicon
Operating Limits : Seal Size - 12mm to 50mm Pressure - 10kg/cm Speed - 10m/s Temperature - -15 o ..to 180 o C Face Material : Rotary Face - Carbon, Sillcon, TC Stationary Seats - Carbon, Silicon, TC Type - S-9, S-6, S-4more...
Type VBSM - 3 is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed more...
Conical spring mechanical seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed spmore...
Single Seal, Unbalanced, Conical spring, Dependent on direction of rotation, It is used for process industry, Water pumps Low solids contents media, Submersible pumps etc.more...
Conical Spring Seal (LIE/704): These seals are suitable for gear pumps, water, submersible and monoblock pumps and marine products. Single coil with a conical unidirectional springs are used which is self cleaning and highly dependable in arduous services. The flexible duck bellomore...
Conical spring Unbalanced seals has taper Spring of various type and dimension to suit lot of media.Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively.more...
Conical Spring Seals is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Conicamore...
Conical Spring Seals is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. more...
conical spring unbalanced Mechanical Seal with “O” ring as secondary sealing offered for wide service applications. These seals designed are dependent of the direction of rotation, torque transmission is done by single conical spring and direction of rotation is seen from themore...
Single coil conical spring unbalanced seals are extremely rugged & reliable and therefore used in wide range of sealing applications. These seals have very few parts & hence can be easily assembled or dismantled. The seal arrangement does not warrant any modification evenmore...
Conical spring seal suitable for unstrained - juice, raw juice, sulphured & clear juiced, masrition water, quadriple or desuperheater or centrifugal machine, hot water, pan condensate, sulphited unsulphited syrup etc. Distillery pumps for sprit, alcohol, liquor, wash handling etcmore...
For Buyer 
For Seller 
Help 
08048006420
Ask a question about 
