We keep the finished assortment of products in the highly developed and capacious storage unit. This helps us in keeping the products safe and sorted till the final dispatch. Our entire array of products is sternly manufactured using certified array of raw materials. These inputsmore...
Specifications : Specifications : 50/60Hz ,Rating : 12.5/20/25/33.3/50/75/80/100 Kvar ,Voltage : 400/415 V and Application : PF improvement/Harmonic Filter
Design Magnetic, three phase, with pre-load contacts for inrush protection Voltage range Umains = 400...440V (other voltages available on request) Control Voltage 220...240V (Other voltage available on request) Mounting DIN hat rail W x H = 35 x 7.5mm or base mounting lugs for 5mmore...
Capacitor Duty Contactors of capacitor duty contactor enhance the life of the capacitors also limits the system transients thus improving powerquality. Contactors have additional auxiliary contactors have additional auxiliary contacts with current limiting resistors in series witmore...
MV Capacitor Switch for various applications. Vacuum capacitor switches have an age over gas air oil type switches because of highest dielectric strength of vacuum. The core of capacitor switch is a specially designed vacuum contactor suitable for capacitor switching. The switch more...
Feature : Low costs High reliability Small dimensions Direct mounting on DIN Rail 35mm or with fixing screws Built-in pre-charge resistors
WEG CWMC contactors were specially designed to operate power factor correction capacitors (utilization category AC-6b). Special development to perform specific operations for this type of application.more...
Contactor switched Automatic Harmonic Filter Panel ( AHPFC Panel ) is passive tuned filter systems using Frako, Germany make contactors & Clariant make Thyristor switched modules. Automatically controlled power factor regulation, low installation cost. Harmonic filters are in detmore...
Based in Kota(India), We marked our presence in the nationwide market since our products are qualitative and cost effective. We are acknowledged for entertaining voluminous orders at a time as we are supported by streamlined inventory management system and capacious storage facilmore...
There are a large number of feeders running from substation to the load in distribution networks. The line current varies heavily during the day. The nature of load is unpredictable as a large number of small loads are connected in the distribution network. It affects the power fmore...
With our years of experience & in-depth knowledge in this field, we are engaged in offering a quality-assured array of capacitor duty contactor. features: sturdy design heat resistance easy to install other details: we deal in bch (terasaki), siemens, schneider, abb, eaton, legramore...
L&T’s range of capacitor duty Contactors is specially designed for capacitor switching applications. As capacitor switching is associated with high inrush current, the contactors are provided with damping resistors which limit the value of inrush current to a safe value. The comore...
C&S ‘s range of capacitor duty Contactors is specially designed for capacitor switching applications. As capacitor switching is associated with high inrush current, the Contactors are provided with damping resistors which limit the value of inrush current to a safe valuemore...
Excellent damping of In-rush current Reduced watt loss during “ON” condition, saves energy Capacitor bank switching in parallel without de-rating Enhanced equipment life Low maintenance down time Power quality improvement Optimized solution cost more...
We are one of the major Contactor Suppliers in the domestic market. Our contactors are manufactured from the beat quality raw materials which are obtained from the most well known vendors. A motor starter is a contactor with overload protection devices attached. The overload sensmore...
With the thyristor module, we provide the main component - “The Electronic Switch”- for dynamic power factor correction. The LT-TSM series offers fast electronically controlled, self-observing thyristor switches for capacitive loads up to 50 kVAr, that are capable to switch Pmore...
Our firm is engaged in manufacturing and supplying capacitor-switching contractor. these contractors are designed for switching banks of capacitors. The unique design is incorporated with front-mounted resistor elements that limit severely high inrush currents generally seen in imore...