Brinell Hardness Testers

• MOQ : 1 Piece
• Measuring Range : 100-350 HBW
• Surface Treatment : Paint Coated
• Size Of Base : 400 X 720 mm
• Hardness Range : 8-650 HBW
• Depth of Throat : 150 mm
• Material : Stainless Steel

more...

• Frequency : 50 Hz
• Throat : 165mm
• Dimension : 520 x 215 x 700 mm
• Height of Specimen : 175m m
• Voltage : 220V
• Temperature : High Temperature

more...

• Net Weight : 450 kgs (approx)
• Max Test Height : 380 mm
• Power Source : Electric
• Voltage : 415v
• Automation Grade : Automatic
• Mains Supply : 415 V, 50 Hz, 3 Phase

more...

• MOQ : 1 Piece
• Max. Test Height : 410mm
• Loads (kgf) : 250 to 3000 in stages of 250
• Depth of Throat : 200mm
• Drive Motor : 0.33 HP
• Max. Depth of Elevating Screw Below Base(approx.) : 180mm
• Machine Height (approx.) : 1127mm
• Mains Supply (V/cy/ph) : 415/50/3
• Initial Load (kgf) : 250
• Net Weight (approx.) : 450 Kgs.

Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration. This facilities production testing within tolerance limits by compression method.   Basic machine design & operation similar to B 3000 more...

• Machine Height (approx.) : 860mm
• Depth of Throat : 150mm
• Net Weight (approx.) : 250 Kgs
• Max. Depth of Elevating Screw Below Base(approx.) : Nil
• Initial Load (kgf) : NIL
• Loads (kgf) : 250 to 3000 in stages of 250
• Max. Test Height : 254mm

Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration. This facilities production testing within tolerance limits by compression method.   Basic machine design & operation similar to B 3000 more...

• Max. Depth of Elevating Screw Below Base(approx.) : 180mm
• Net Weight (approx.) : 500 Kg
• Depth of Throat : 200mm
• Optical Device : Direct reading optical device with 14X magnification
• Drive Motor : 0.33 HP
• Mains Supply (V/cy/ph) : 415/50/3
• Max. Test Height : 380mm
• Machine Height (approx.) : 1185mm
• Loads (kgf) : 250 to 3000 in stages of 250

Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration. This facilities production testing within tolerance limits by compression method.   Basic machine design & operation similar to B 3000 more...

• MOQ : 1 Piece
• Model Name/Number : RB 3000 O PC
• Power Source : Electric
• Parameter : HB
• Country of Origin : India
• Display Type : LCD
• Supply Type : Manufacturer
• Accuracy : HIGH
• Automation Grade : Automatic

As a customer focused organization of the industry, we are offering a large array of  Computerized Brinell Hardness Tester  to our valuable customers. These products are equipped with the latest technology which performs seamless operations.   more...

• Supply Type : Manufacturer
• Automation Grade : Automatic
• Accuracy : HIGH
• Portable : Yes
• Model Name/Number : RB 3000 (O)
• Country of Origin : India
• Brand Name : Ratnakar
• Display Type : Optical
• Parameter : HB
• Finishing : Polished

We are prominent names in the industry in offering a wide range of  Optical Brinell Hardness Tester.  In this tester, the projects diameter and indenter swivels of ball impression immediately after unloading operation and avoid extra time for measurement of ball impression.   more...

• Dimension : LXBXH
• Brand Name : Ratnakar
• Model Name/Number : RB 3000 J
• Accuracy : HIGH
• Parameter : HB
• Supply Type : Manufacturer
• Automation Grade : Manual

Manual Brinell Hardness Tester Machine designed for effortless loading unloading operation. measure depth of ball penetration with Brinell microscope. This facilities production testing within tolerance limits by compression method more...

• MOQ : 1 Piece
• Loads : 500 to 3000 Stages of 250
• Display Type : Analog
• Country of Origin : India
• Size of Base : 255 X 495 mm
• Max. Test Height : 254mm
• Brand Name : Aditya Instruments
• Depth of Throat : 150mm
• Machine Height : 860mm
• Net Weight : 210 Kg

Simplest model of Brinell Hardness tester with mechanical design. Loading, unloading manual, best suitable for testing batch quantities. more...

• Machine Height : 1185mm
• Net Weight : 500 Kg
• Size of Base : 370 x 670mm
• Drive Motor : 0.33-415v/p HP
• Country of Origin : India
• Loads : 500 to 3000 Stages of 250
• Max. Test Height : 380mm
• Brand Name : Aditya Instruments
• Max. Depth of Elevating Screw Below Base : 180mm
• Display Type : Analog

Basic machine design & operation similar to Al B-3000(H). In addition, an ‘optical device’ with 14 x Magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. The indenter sweivels & projects dia of ball impr more...

• Max. test Height : 410mm
• Drive Motor : 0.33-415v/p HP
• Depth of Throat : 200mm
• Size of Base : 370 x 670mm
• Net Weight : 450 Kg
• Machine Height : 1127mm
• Max. Depth of Elevating screw below Base : 180mm
• Brand Name : Aditya Instruments
• Display Type : Analog
• Country of Origin : India

Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measures depth of ball penetration. This facilitates production testing within tolerance limits by compression method. more...

• Automation Grade : Automatic, Semi Automatic
• Feature : Durable, Easy To Use, Superior Finish
• Quality : Best
• Type : Brinell Hardness Testers
• Supply Type : Supplier

This machine is designed for measuring hardness of castings, forgings, other metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. This machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, foundries & more...

• Warranty : 1year
• Quality : Best
• Feature : Durable, Easy To Use, Superior Finish
• Automation Grade : Automatic, Semi Automatic
• Supply Type : Supplier

This machine is designed for measuring hardness of castings, forgings, other metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. This machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, foundries & more...

• Usage/Application : Ideal for Small Precision Components
• Accuracy : E2 (3.0 + 6L/1000)
• Capacity : Stage Load maximum 25KG
• Scale Resolution : 0.00001
• Repeatability : within 2 Micron
• Resolution : 0.001 0r 0.0001mm

The Brinell Impression Measurement System (B.I.M.S.) is automatic brinell microscope. The specially developed software give reliability, repeatability in Brinell measurement. The B.I.M.S virtually eliminates operator influence It is found that measuring Brinell indentations can result in measurement errors be more...

• Weight (Approx.) : 450 Kg
• Scale least count : 0.01 mm
• Measurement Range : 1-6 mm
• Power Supply : 415/50/3 V/Cy/Ph
• Max. Test Height : 410 mm
• Machine Dimension (Approx.) : L 995 x W 400 x H 1178 mm
• Total Load : 500 to 3000 in stages of 250 kgf
• Throat depth : 200 mm

VMC' Computerized Brinell Hardness Tester is a simple and a accurate means to produce brinell impression and automatically measure it. It gives direct display of Brinell hardness number. These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and t more...

• Brand Name : VMCB3000PC

'VMC' Computerised Brinell Hardness Tester is a simple and accurate means to produce brinell impression and automatically measure it. The Computerised Brinell Hardness Tester gives direct display of Brinell hardness number. These Computerised Brinell Hardness Testers are suitable for measuring the hardness of more...

• Display Type : Analog
• Test Force : 3000kg (1000kg, 750kg, 500kg optional)
• Accuracy : Test force accuracy comply with ISO ,and ASTM standards
• Brand Name : Matrix Testing Machine Services
• Dimension : 350mm (Height) x 100mm (Throat depth)
• Automation Grade : Manual
• Weight : 14 Kg Approx.
• Model Name/Number : MATRIX - KBT SERIES
• Test Range : 32- 650 HBW
• Parameter : HB

more...

We offer fie computerised fully automatic brinell hardness tester, model b3000-pc-fa is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "cycle start" button. The job is raised and b more...

• Frequency : 50 Hz
• Air Requirements : 60 psi
• Brand : Enkay Enterprises
• Vertical Capacity : 229 mm
• Operating Temperature : 10 to 49 Deg.C
• Voltage : 110 V AC
• Throat Depth : 114 mm

more...

The EHB-3000A/3000E Brinell hardness testing creates the largest indentation comparing all other hardness testing methods. It is able to reflect the comprehensive features of the material, and is unaffected by the microstructure and inhomogeneous of the specimen. So it with high precision and widely used more...

• Power : 1-3 Kw
• Usage : Hardness Testing, Laboratory, Steel Industry
• Material : Mild Steel
• Color : White And Blue
• Finishing : Anti corrosion, super hydrophobic Paint,
• Driven Type : Electro-hydraulic
• Brand Name : Akuracy
• Certification : ISO 9001:2008 Certified
• Operating Type : Semi Automatic
• Automation Grade : Optical measurement

Watch our YouTube Channel: (https://youtu.be/CVKwnoPBFB4?si=uP4hKHKqdVU5DfFr)    We're delighted to have you here. Feel free to ask any questions you have about our precision-engineered material testing and dynamic balancing machines. Our chatbot is here to provide Dedicated 24x7 support. more...

We have gained expertise in retailing and wholesaling a wide range of Brinell Hardness Testers more...

• Type : Digital Tester
• Temperature Capacity : Medium Temperature
• Automatic Grade : Automatic
• Puncture Voltage : 220V
• Brand Name : ENKAY
• Frequency : 45Hz
• Condition : New
• Certification : ISO 9001:2008 Certified
• Color : White
• Application : Industrial Use

We are actively functioning as a trustworthy Manufacturer, Exporter and Supplier of Electronic Brinell Hardness Tester from Delhi. Precision engineered, the Hardness Tester we provide is the preferred choice among the buyers across different countries of the world. Buyers are free to place retail as well as b more...

The Brinell Hardness Tester we provide is designed with a control circuit and Hydraulic Power pack for easy loading unloading operations. The tester is endowed with an adjustable Dwell Time Facility, which facilitates production testing within tolerance, ensuring reliability and accuracy of test results. This more...

• MOQ : 1 Set(s)
• Supply Type : Manufacturer

sss make hydraulic brinell hardness testing machine   designed for measurement of steel and other ferrous material. These machines are also used for hardness measurement of non-ferrous material like brass, bronze, and aluminum. These machines are offered with hydraulic power pack and control circuits for eff more...

• Supply Type : Manufacturer

sss make optical brinell hardness testing machine  designed for measurement of steel and other ferrous material. These machines are also used for hardness measurement of non-ferrous material like brass, bronze, and aluminum.   basic machine design and operation similar to sss-b-3000(h). In an addition optic more...

• Supply Type : Manufacturer

We are offering brinell hardness tester. Designed for testing the brinell hardness of metals and alloys, the brinell hardness testing machine is of vital importance in industrial sector. We bring for the high-grade brinell hardness testing machine for clients across the globe. We are named amidst the promin more...

• Drive Power : 0.66 HP
• Telescopic cover for elevating screw protection : 1 Set
• Ball holder 5mm : 1 No.
• Testing table 70mm Ø : 1 No.
• Raising/lowering : 240 mm/min
• Mains supply : 415V, 50Hz, 3phase
• Allen Spanner : 4 Nos.
• Test Block HB-10/3000 : 1 No.
• Test Block HB-5/750 : 1 No.
• Dept. of throat : 200 mm

Computerised Fully Automatic Brinell Hardness Tester , Model B3000 - PC - FA is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "Cycle Start" button. The job is raised and brought i more...

• Max Test Height X Throat : 380
• Material : Metal
• Minimum Order Quantity : 1 Piece
• Brand Name : FIE
• Machine Height : 1178 mm

We are the leading manufacturers, exporters and supplier of this products. more...

Fully Computerised (PC Based) Brinell Hardness Tester.  Direct and accurate measurement of Brinell Hardness Number using "State of Art"      image processing technology.  'Wide Testing Range' : from soft metal to medium hardness steels.  High accuracy and repeatability of measurement at all loads.  Fa more...

• Measuring accuracy with CCD camera and built in optics : 0.01 mm
• Load Range : 250 to 3000 kgf in stages of 250kgf
• Dwell timer : 1 to 99sec.
• Net Wight ( approx ) : 450 kg.
• Drive Power : 0.66 HP
• Dept. of throat : 200 mm
• Mains supply : 415V, 50Hz, 3phase
• Max. test height : 380 mm
• Machine height ( approx ) : 1185mm
• Raising/lowering : 240 mm/min

'FIE'Computerised Fully Automatic Brinell Hardness Tester, Model B3000-PC-FA is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "Cycle Start" button. The job is raised and brought i more...

Features : •  Fully Computerised (PC Based) Brinell Hardness Tester. •  Direct and accurate measurement of Brinell Hardness Number using "State of Art" image processing technology. •  'Wide testing range' : from soft metal such as lead up to medium hardened steels. •  High accuracy and repeatabili more...

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Voltage : 220V
• Power : 3-6 Kw
• Country of Origin : India
• Driven Type : Electric
• Color : Green
• Operating Type : Semi Automatic
• Display Type : Digital

We offer Brinell Hardness Tester. The machine is designed for determining the Brinell Hardness (BHN) of metals and alloys. The load is applied by manually and the indentation is read with the help of a Brinell Microscope. The machine is supplied complete with balls of 5MM and 10mm diameter, Ball holder, Brine more...

• Operating Type : Semi Automatic
• Voltage : 220V
• Country of Origin : India
• Display Type : Digital
• Power : 3-6 Kw
• Supply Type : Manufacturer
• Color : Green
• Material : Mild Steel

We offer Optical Brinell Hardness Tester. Model SRI B3000 (O) Feature This is a modified version of AKB-3000 which is provided with an inbuilt optical system of 14X magnification. An automatic indenter index system is provided which tilts the indenter after the impression and the magnified image is visible on more...

• Voltage : 220V
• Driven Type : Electric
• Material : Mild Steel
• Supply Type : Manufacturer
• Color : Green
• Display Type : Analog
• Country of Origin : India

We offer Hydraulic Brinell Hardness Tester . SHRI RAM INDUSTRIES Model - SRI B3000(H) Machine designed with a hydraulic power pack and control circuits for effortless loading unloading operations. A dial gauge in front measures depth of ball penetration. This facilitates production testing within tolerance li more...

• Test Block HB-5/750 : 1 pc.
• Max. test height - mm : 410
• Net Wight ( approx ) - kg. : 450
• Instruction manual : Nil
• Ball holder 5mm : 1 pc.
• mains supply - V/cy/ph : 415 / 50 / 3
• Optical Device : Nil
• Model : B - 3000 [H]
• Loads - kgf : 250 to 3000 in stages of 250
• Telescopic Cover for elevating screw protection. : 1 Book

  Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation A dial gauge in front measure depth of ball penetration. provides production testing within tolerance limits by compression method. MCS Make Hardness Tester Model B-3000 (H)  Confirms to IS : 22281 more...

MCS  Make Hardness Testers of Vickers series are designed and manufactured for very high accuracy. ease of operation, reliability and long-term stability. These machines are suitable for checking Vickers or Brinell Hardness of steel and other metals Loads are applied with dead weights and are selectable with more...

• Country of Origin : India
• Weigth : 20-30kg, 30-40kg
• Color : Mulit Colour
• Application : Checking Hardness
• Power : 1-3kw, 3-6kw
• Certification : CE Certified
• Warranty : 1year
• Driven Type : Electric
• Automatic Grade : Automatic
• Voltage : 110V, 220V

We are a notable Manufacturer, Exporter and Supplier of Computerized Brinell Hardness Tester Model No. - KB-3000 (H) around the globe. Clients place huge orders for our Computerized Brinell Hardness Tester Model No. - KB-3000 (H), as it is highly reliable, efficient and durable. We offer our Computerized Brin more...

• Voltage : 110V, 220V
• Power : 1-3kw, 3-6kw, 9-12kw
• Weigth : 20-30kg, 30-40kg, 40-50kg
• Driven Type : Electric
• Warranty : 1year
• Automatic Grade : Automatic, Fully Automatic
• Application : Checking Hardness
• Color : Sky Blue
• Country of Origin : India

We are a reliable Manufacturer, Exporter and Supplier of Computerized Brinell Hardness Tester Model No. - KB-3000 (HPC) worldwide. Our Computerized Brinell Hardness Tester Model No. - KB-3000 (HPC) is an electrically operated Hardness Testing machine that is highly suitable for mass testing of components made more...

• Warranty : 1year
• Voltage : 110V, 220V
• Weigth : 20-30kg, 50-60kg
• Certification : CE Certified
• Color : Multi Colour
• Power : 1-3kw, 3-6kw
• Country of Origin : India
• Driven Type : Electric
• Application : Checking Hardness
• Automatic Grade : Automatic

The company is a well-known Computerized Brinell Hardness Tester Model No. - KB-3000 (J) Manufacturer, Exporter and Supplier from Ichalkaranji, Maharashtra. WE make use of high grade raw-materials and components to manufacture our Brinell Hardness Tester Model No. - KB-3000 (J). Clients highly appreciate and more...

• Allen Spanner : 4 Nos.
• Measuring accuracy with CCD camera and built in optics : 0.01 mm
• Ball holder 5mm : 1 No.
• Dwell timer : 1 to 99sec.
• Raising/lowering : 240 mm/min
• Max. test height : 380 mm
• Test Block HB-5/750 : 1 No.
•   :  
• Dept. of throat : 200 mm
• Machine height ( approx ) : 1185mm

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   'ARUN' Computerized Fully Automatic Brinell Hardness Tester, Model B3000-PC FULL AUTO is fabricated from steel plates and is designed for precise loading system. It is fully automat more...

• Initial Load - kgf : Nil
• Brinell Microscope : Nil
• Machine height ( approx )  - mm : 1185
• Telescopic Cover for elevating screw protection. : 1 Set
• Model : B - 3000 [ O ]
• Dept of throat - mm : 200
• Test Block HB-10/3000 : 1 pc.
• max. depth of elevating screw below base ( approx. ) - mm : 180
• Testing table 70mm dia with 'V' groove for round jobs 10 to 80mm dia. : 1 pc.
• Instruction manual : 1 Book

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   Basic machine design & operation similar to B-3000 (H). In addition ‘optical device’ with 14 x magnification provided in front to project dia of ball impression on glass screen more...

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India ) Features Fully Computerised ( TOUCH SCREEN Based ) Brinell Hardness Tester. Direct and accurate measurement of Brinell Hardness Number using "State of Art" image processing technology. more...

• Model Number : B 3000-LC
• Country of Origin : India
• Brand Name : FIE

Touchscreen Brinell Hardness Tester. Accurate measurement of Brinell Hardness number using image processing technology. Wide testing range - from soft metal upto hardest. High accuracy & repeatability of measurement at all loads.Faster measurement yielding higher productivityServo driven linear motion slide f more...

• Country of Origin : India
• Model Number : B 3000-TS
• Brand Name : FIE

Fully computerised touchscreen Brinell Hardness Testing Machine. Simple & accurate measurement technique. Automatic measurement of the indentation to give Brinell Hardness Tester. Suitable for measuring the hardness of precision metallic parts. USB camera with front touchscreen HMI. Front Panel Touchscreen di more...

• Mains Supply : 3 Phase, 415V, 50Hz, A.C
• Drive Motor (hp) : 0.50
• Initial load (kgf) : 250
• Max. Depth of elevating screw below base (mm) approx. : 180
• Machine height (mm) approx. : 1145
• Loads (kgf) : 500 to 3000 in steps of 250
• Size of base (mm) approx. : 400 x 740
• Indentation Measurement : By separate Microscope
• Max. test height x throat (mm) : 380 x 200
• Net weight (kg) : 325

Brinell Hardness Tester, Model: AKB-3000 is designed for Brinell hardness measurement on steels and other ferrous materials and also on non ferrous materials like Brass, Bronze, Aluminium, etc. The material can be cast, forged or rolled and the shape can be flat, round or irregular The actual load application more...

• Initial load (Kgf) : NIL
• Maximum depth of elevating screw below base (mm) approx. : 180
• Net weight (Kg) approx : 400
• Drive motor (hp) : 0.5
• Maximum test Height x Throat (mm) : 380 x 200
• Machine height (mm) approx : 1250
• Mains supply : 3 Phase, 415V, 50 Hz, AC
• Size of base (mm) approx : 400 x 740
• Indentation Measurement : Direct reading through CCD Camera with 60X magnification on inbuilt Industrial PC.
• Load (kgf) : 500 to 3000 in steps of 250

Computerized Brinell Hardness Tester is designed for Brinell hardness measurement on steels and other ferrous materials and also on non- ferrous materials like Brass, Bronze, Aluminium, etc. The material can be cast, forged or rolled and the shape can be flat, round or irregular shapes.   Features The actual more...

Applications This Machine is used for measuring Brinell hardness of ferrous and non ferrous casting in foundries, engineering industries, material testing laboratory It is is used in heat treatment plants for hardness measurement before and after heat treatment and forging plants. Calibration & Accuracy The M more...

• MODEL NO : FRET

Test loads- 15, 30, 45 kgf for superficial scale and 60, 100, 150 kgf for Rockwell ABC scale Digital Display with 0.1 Rockwell resolution. Loading/Unloading, Cycle automatic by a push button operation. Optional - Printer facility. more...

• MODEL NO : B3000(H)

Test loads 500 to 3000 kgf. in steps of 250 kgf. Capacity - Throat 200mm. Max test height 410mm. Hydraulic power pack and control circuit for effortless loading/unloading operations. Facilitates production testing within tolerance limits as set on dial gauge. Conform to IS: 2281, BS: 240 & ASTM:E10   more...