Arduino Board

• MOQ : 10 Piece
• Diameter : 50 mm
• Supply Type : Supplier
• Input Voltage : 2.7V-5.5 V
• Operating Voltage : 2.7V-5.5 V
• Model Type : LilyPad
• Eeprom : 512 Bytes

more...

• Clock Speed : 16 MHz
• Dimensions : 75 x 54 x 12mm
• Input Voltage : 7-12V
• Model Type : Arduino Uno R3
• Weight : 26gm
• Supply Type : Supplier

more...

• Eeprom : 2.5KB
• Supply Type : Supplier
• Operating Voltage : 5V
• Input Voltage : 7-12V
• Flash Memory : 32KB
• Dimension : 48x18x8mm

more...

• MOQ : 100 Piece
• Supply Type : Manufacturer
• Brand Name : Arduino
• Circuit Operating Voltage : 5V
• Operating Voltage (VDC) : 5V
• Analog IO Pins : A0 TO A7
• Input Voltage (limits) : 5V

more...

• Input Voltage : 12 V
• Memory : 32 K ( Flash )
• Brand Name : Arduino
• USB 2.0 Ports : 1 Port
• Color : Blue
• Weight : 28 G
• Size : 3 H X 2.8 L Inch
• Analog Input : 6
• Supply Type : Manufacturer
• Clock Speed : 16 Mhz

more...

• Chip LDO output voltage : 3.3 V
• Operating current (with signal output state) : less than 40 mA
• Features : General operations on audio files,On-board micro-SD slot and 3.5mm audio jack,Support sample rate of 8/11.025/12/16/22.05/24/32/44.1/48(kHz)
• Operating current (without signal output state) : less than 15 mA
• Chip : KT403A
• Supply Type : Supplier
• Input : 5V(DC)
• File formats supported : MP3, WAV, WMA
• Chip output current : 100 mA(at Max.)
• Maximum memory supported for SD card : 32 GB

more...

• Features : High-end industrial machinery,Laboratory equipment,Computer vision,PLCs,Industry-ready user interfaces,Robotics controller
• SD CARD : Interface for SD Card connector (through expansion port only)
• GPU : Chrom-ART graphical hardware Accelerator
• Wireless : BT5.0 + WiFi 802.11 b/g/n 65Mbps option
• Current Consumption : 2.95 A in Standby mode (Backup SRAM OFF, RTC/LSE ON)
• Timers : 22x timers and watchdogs
• Supply Type : Supplier
• DAC : DAC 2 12-bit DAC (1 MHz)
• Crypto Chip : ECC608 or SE050C2 (Common Criteria EAL 6+) option
• Power : Through USB-C connector or LiPo battery (integrated charger)

more...

• Supply Type : Supplier
• Digital I/O Pins : 54 (of which 12 provide PWM output)
• Operating Voltage : 3.3V
• DC Current for 3.3V Pin : 800 mA
• Analog Input Pins : 12
• Weight : 35g
• Total DC Output Current on all I/O lines : 130 mA
• Input Voltage (recommended) : 7-12V
• Microcontroller : AT91SAM3X8E
• DC Current for 5V Pin : 800 mA

more...

• MOQ : 10 Piece
• Card Reader : Micro-SD
• Input Voltage : 5 V
• RAM : 64 MB DDR2
• Operating Voltage : 3.3 V
• DC Current per I/O Pin : 40 mA
• Clock Speed : 16 MHz
• Weight : 32 g
• Flash Memory : 16 MB
• PWM Channels : 7

more...

• Item Code : OMP-A012
• Weight : 200 g

more...

• Item Code : OMP-A014
• Weight : 100 g

more...

• Operating Voltage : 3.3 V
• Total DC Output Current on all I/O lines : 130 mA
• Microcontroller : AT91SAM3X8E
• Input Voltage (recommended) : 7 - 12 V
• Length : 101.52 mm
• Width : 53.3 mm
• Clock Speed : 84 MHz
•   :  
• Brand Name : Arduino
• SRAM : 96 KB (two banks: 64KB and 32KB)

more...

• Packaging Type : Box
• DC Current  : 800 mA
• Clock Speed : 84 MHz
• Brand Name : Arduino
• Operating Voltage : 1.8 - 5.5 V
• Features : These are compatible with all arduino compatible shields and the arduino ide, It has a standard 6x1 avr isp header, It comes with an atmega328 with a pre-burnt arduino boot loader.
• SRAM : 96 KB

more...

• Digital I/O Pins : 54 (of which 15 provide PWM output)
• Analog Input Pins : 16
• DC Current for 3.3V Pin : 50 mA
• DC Current per I/O Pin : 20 mA
• Flash Memory : 256 KB (ATmega2560) of which 8 KB used by bootloader
• Clock Speed : 16 MHz
• Operating Voltage : 5V
• Input Voltage (recommended) : 7-12V
• EEPROM : 4 KB
• SRAM : 8 KB

The  Arduino Mega 2560 R3  is a microcontroller board based on the  ATmega2560 . It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. more...

• EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
• Input Voltage (limits) : 6-20 V.
• Dimensions : 0.73″ x 1.70″.
• Clock Speed : 16 MHz.
• Length : 45 mm.
• Flash Memory : 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by boot loader.
• SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
• Weigth : 5 g.
• Digital I/O Pins : 14 (of which 6 provide PWM output).
• Analog Input Pins : 8.

NANO 3.0 CONTROLLER COMPATIBLE FOR ARDUINO NANO CH340 USB DRIVER WITHOUT CABLE The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a differe more...

Features of Arduino Development Board Microcontroller:  ATmega328P-PU Programming Pins Header  (compatible with FT232 based Programmer),   ISP Header  (compatible with USBAsp)  Multiple  Power Input (Vin), 5V, Gnd Headers Operating Voltage:  5V Input Voltage: 9-12V Digital I/O Pins:  14  (of which 6 more...

• MOQ : 500 Piece
• Type : Arduino Shield
• Condition : New

The Arduino Uno R3 is a  microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller . It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs). Programs can be loaded on to it from the easy-to-use Arduino computer more...

• Condition : New
• Color : Blue, Grey
• Type : Automatic

The Arduino Nano is  a small, complete, and breadboard-friendly board based on the ATmega328  (Arduino Nano 3. x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Mi more...

The Arduino Uno R3 is a microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller. It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs). ... The R3 is the third, and latest, revision of the Arduino Uno. more...

• MOQ : 5000 Piece(s)
• Voltage : 5V
• Color : Blue
• Brand Name : LBD Robotics Pvt. Ltd.
• Size : 7x5x1.5

It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.Digital I/O Pins 14 (of which 6 provide PWM output).Analog Input Pins 6.DC Current per I/O Pin 40 mA.DC Current for 3.3V Pin 50 mA.Flash more...

• Warranty : 1 Year
• Voltage : 220 V
• Conditon : New
• Material : Plastic
• Brand Name : Arduino
• Color : Blue

more...

• Material : Plastic
• Voltage : 220 V
• Color : Blue
• Type : Automatic
• Warranty : 1 Year
• Condition : New

more...

• Availability : In Stock
• Category : ARDUINO
• Product Code : combo-UNO kit-01
• Product Tags : COMBO-ARDUINO-UNO-01

We have hired a team of professionals who hold immense knowledge of packaging. They make use of premium packaging material so as to make damage free deliveries. Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients more...

• Price : Rs. 750

By employing impurities-free raw materials, our entire array of products is produced. We, as a trusted name, procure these raw materials only from reliable sources of the market. We are blessed with a large storage facility that helps us in keeping large stock and meeting urgent and massive requirements of th more...

• Price : Rs. 220

We have with us a well-maintained and capacious storage unit that is facilitated by advanced and automated warehousing system, which is operated and supervised by experts only. Located in Guwahati(India), we ensure safe and secure deliveries, throughout the country, within the agreed time frame. more...

• Input Voltage (limits) : 6-16V
• Operating Voltage : 3.3V
• Input Voltage (recommended) : 7-12V
• Length : 101.52 mm
• SRAM : 96 KB (two banks: 64KB and 32KB)
• DC Current for 5V Pin : 800 mA
• Analog Output Pins : 2 (DAC)
• Total DC Output Current on all I/O lines : 130 mA
• Flash Memory : 512 KB all available for the user applications
• Width : 53.3 mm

more...

• Color : Blue, Green
• Type : Automatic, Semi-automatic
• Current Type : AC, DC
• Power : 20 MA, 40 MA, 60 MA
• Clock Speed : 16 MHz, 18 MHz, 20 MHz
• Architecture : AVR
• Condition : New, Used
• Material : Plastic
• Voltage : 7-12 V, 7-12V

more...

• Operating Voltage : 5v
• Pwm output : pins 3, 5, 6, 9, 10, and 11 can provide 8-bit pwm output
• Input Voltage : 7v - 12v
• Digital io pins : 14 (of which 6 provide pwm output)
• Microcontroller : atmega8
• Analog input pins : 6

We are offering areduino usb + atmega 8.areduino usb + atmega 8 board is a microcontroller board based on the atmega8. Areduino usb + atmega 8 connects to the computer with a standard usb cable and contains everything else you need to program and use the board and has 14 digital inputoutput pins (of which 6 c more...

• Input Voltage : 7v - 12v
• Microcontroller : ATmega168
• Analog Input Pins : 6
• Operating voltage : 5v
• Digital IO Pins : 14 (of which 6 provide PWM output)
• Color : Green

Areduino USB + Atmega 168 board is a microcontroller board based on the ATmega168. Areduino USB + Atmega 168 board connects to the computer with a standard USB cable and contains everything else you need to program and use the board. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), more...

• PWM Output : 6
• Architecture : AVR
• Microcontroller : ATmega328
• Digital I/O Pins : 22
• Input Voltage : 7-12 V
• Operating Voltage : 5 V
• Clock Speed : 16 MHz
• Analog I/O Pins : 8
• DC Current per I/O Pins : 40 mA (I/O Pins)

  It has 14(of which 6 provide PWM output) Digital I/O pins  ,   8 input analog inputs  . You can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics.   more...

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328.   more...

  Clone LilyPad Arduino 328 Main Board The LilyPad Arduino family of boards has been designed for wearable applications. It works on rechargeable batteries and allows easy connection with sensors and actuators developed for an easy integration in clothes and fabrics.     The LilyPad Arduino 328 Main Board more...

• Maximum supply voltage (not recommended) : 20v
• Supply Voltage (recommended) : 7-12V
• Operating Voltage : 5V
• Microcontroller : ATmega328

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcon more...

• Digital : I/O Pins 14 (of which 6 provide PWM output)
• Microcontroller : ATmega328
• Input Voltage : 3.35 -12 V (3.3V model) or 5 - 12 V (5V model)
• Operating Voltage : 3.3V or 5V (depending on model)

The Arduino Pro Mini is a microcontroller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakou more...

• Input Voltage (recommended) : 7-12V
• Input Voltage (limits) : 6-20V
• Operating Voltage : 5v
• Microcontroller : ATmega328

The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHzcrystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to supp more...

• Atmega2560 : 54 (of which 15 provide PWM output)

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560It has 54 digital inputoutput pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains e more...

• ATmega328 : 32 KB (ATmega328) of which 0.5 KB used by bootloader

The arduino -bluetooth is a microcontroller board based on The atmega328.it has 14 digital inputoutput pins (of which 6 can Be used as pwm outputs), 6 analog inputs, a 16 mhz ceramic resonator, And a reset button. It contains everything needed to support the microcontroller; Simply connect it to a computer wi more...

• Memory Storage : 24C32 32K I2C EEPROM
• Temperature Range : -40 to +85 Deg C
• Color : Blue
• Packaging Type : Box
• Model Number : DS1307

more...

• Feature : Operating voltage 3.3V Input voltage - 3.3-9V Digital I / O - 14 (6 PWM) RAM - 2 Kb

Adraxx Pro Mini board is more suitable for applications and installations where space is premium and projects are made as permanent set ups. This board is a 5 V version, powered by ATmega328. Power The Adraxx Pro Mini can be powered with an FTDI cable or breakout board connected to its six pin header, or with more...

• Feature : Orignal and Brand new product Especially designed for Arduino beginners

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital inputoutput pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It conta more...

The arduino uno is a microcontroller board based on the atmega328 (datasheet). It has 14 digital input output pins (of which 6 can be used as pwm outputs), 6 analog inputs, a 16 mhz ceramic resonator, a usb connection, a power jack, an icsp header, and a reset button. It contains everything needed to support more...

The arduino micro is a microcontroller board based on the atmega32u4 (datasheet), developed in conjunction with adafruit. It has 20 digital inputoutput pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, an icsp header, and a reset button. more...

We are offering arduino yun microcontroller board. The arduino yún is a microcontroller board based on the atmega32u4 (datasheet) and the atheros ar9331. The atheros processor supports a linux distribution based on openwrt named openwrt-yun. The board has built-in ethernet and wifi support, a usb-a port, mic more...

• Features : 20 Digital I/O Pins,12 ADCs,16MHz Clock Speed etc.

This is Leonardo Board, Arduino's first development board to use one microcontroller with built-in USB. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a com more...

• Features : 20 Digital I/O Pins,12 ADCs,16MHz Clock Speed,32 KB Flash Memory etc.

This is Leonardo Board, Arduino's first development board to use one microcontroller with built-in USB. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a com more...

Arduino UNO is upgrated version of arduinoDuemilanove. It use ATmega8U2 as replacement of FT232RL. Besids USB-UART bridge, it can also be configuraed as mouse, joystick, keyboard or camera. FeaturesMicrocontroller ATmega328Operating Voltage 5VInput Voltage (recommended) 7-12VInput Voltage (limits) 6-20VDigita more...