We are offering Angle Meter. Slant-series rotary dual-scale pitch/angle meters -> slant al200 quickly measure, verify or replicate surface pitch or angle simple, one-hand operation with large thumb-screw positioned on handle big, easy-to-read scales rotate and align using a largemore...
FEATURES : Easily Readable Digital Display Shows The Exact Angle At Once, With Its Horizontal And Vertical Bubble Level, It Can Be Used As A Spirit Level, Angles Can Be Determined With Accuracy Of ±0.5°.
Application : Thermocouple Calibration Bath ,High / Low temperature Furnace, Heat treatment Oven , molding Machine, Hot Air oven , Heat / cool Chamber, Hot bench, Portable oven etc…
The Tempsen Solid State Relay accept DC voltage ( 4-32 VDC) , Variable current ( 4-20 mA), AC Voltage( 12-230VAC), Variable ohms ( 0-470 K). The SSRPPC soft start , no noise Long life work , use proper heat sink avoid rejection. The SSR work ON OFF mode function only controlled bmore...
Apex introduces Static Contact Angle Measuring System ACAM-S1, where Contact Angle can be measured precisely with Sessile Drop Technique and analyzed accurately with Five Different Analysis Methods viz., Half-angle Fitting, Circle Fitting, Ellipse Fitting and Tangent Fitting Analmore...
Digital Phase Angle meter shows phase angle between any two phases of VoltageCurrent Phase of VoltageCurrent can be selected True rms readngs. Inbuilt Voltmeter, Display : 4½ Digit, 12.5mm Bright Red LED., Range : 600V.AC, Resolution : 0.1V, Inbuilt Amp Meter, Display : 4½ Digimore...
Contact angle meter Model no: HO-IAD-CAM-01 is a basic educational equipment for illustrating the basics of contact angle measurement to students. It has manual dispensing with CCD interface for measuring contact angle of liquids on solid surfaces. The surface over which contact more...
Testronix’s Digital Gloss Meter Tri-angle is a device which is designed specially to measure the gloss reflection on the surface of the material. The instrument is provided with numerous geometrical angles to fulfill the testing need of a vast number of customers. The device ismore...
No moving parts, uses electronic chip • IP – 65 Graded Encloser. • Sensor can be left hand or right hand cab mounted, will automatically adjust for the side it is installed on. • Ideal for monitoring: Main Boom, Luffing Jib, Live Mast, Custom Applications. • Measuringmore...
No moving parts, uses electronic chip • IP – 65 Graded Encloser. • Sensor can be left hand or right hand cab mounted, will automatically adjust for the side it is installed on. • Ideal for monitoring: Main Boom, Luffing Jib, Live Mast, Custom Applications. • Measuringmore...
The Contact Angle meter also goes by the name Goniometer DropMaster (DMs) series Contact Angle meters has a range of systems starting from DMs-200 which is the basic of the models to the most sophisticated DM-701. The model DMs-200 model is a basic model used to determine the Conmore...
Kyowa Interface Japan has been manufacturing Contact Angle meters since 1960. These instruments are used in the Contact Angle measurement, Surface Free Energy analysis and SurfaceInterfacial Tension measurement. The Contact Angle meter also goes by the name Goniometer DropMaster more...
DSA25 Series : The entry level instrument which is an easy-to-use and reliable for measuring contact angle, Surface Free energy and Surface & Interfacial Tension measurement by Pendent drop method. The trend to water-based bonding, coating and printing on plastics has made solmore...
Phase Angle Meter is a compact direct reading instrument suitable for reading phase angle between voltage-voltage, voltage-current and current-current. In voltage range of 60 of 440 and current range of 1 to 5 Amps. Available in digital and analog read-out it operates on 230V/50Hmore...
For use with the OCA 20, OCA 30, OCA 35, OCA 40, and their variants. For the software controlled (automatic) selection and positioning (±0.05 mm) of the dosing needles. Available in four variants, each with the option of further enhancement to the "plus" version with increased pmore...
Whether your application demands the evaluation of contact angle or drop shape, the video-based optical contact angle measuring system, OCA 15EC, is the instrument of choice where initial budgets are limited. The single direct dosing system, SD-DM, together with the electronic domore...
We are actively involved in the production and distribution of Angle Indicator Meter . The Angle Indicator Meter is extensively demanded by various industries for the high quality and precise make. Because of its versatility, the Angle Indicator Meter becomes useful for shop floomore...