GST : 07AAFFI7020K1ZE
Add Review
Our Products
Saws, Chainsaws & Saw Blades
2 Products availableRoll Forming & Bending Machines
1 Products availableCutting Machine
1 Products availableTapping Machine
1 Products availableWe offer the best product range of Lathe Machines, All Geared Lathe Machines, roll turning lathes and Lathe Machine.
Hardened & ground bed ways, four position tool post, Change gear set, Chuck plate Tool Post key, Centre adaptor, Motor pulley, Electric motor Dog chuck, true chuck Coolant pump, tank and nozzle Quuick change tool post/ rear tool post taper turning attachment Reverse- forward switch, vee belts Splash guard.
Salient FeaturesBed is made from 25 grade cast iron of 180 bhn hardened strictlyBoring of head stock is done on WMW boring machine fitted with induction hardended and ground spindle made from alloy steel.Apron is totally enclosed oil bath system with lever type arrangment for automatic feeds.Double screw norton gear box :- provided as time saver equipmentwith separate thread & feed shaft. thus, feed & thread gears could be changed rapidly and decreases the wear and tear in half nut and lead screw.Hexagonal shaped tail stock with hardened and ground tail stock spindle made from alloy steel having external and internal grindingOil dipped slid boxOil dipped norton gear box with 8 speed spindle head All pulley's are balanced on balancing machine Double bearing in the front of head stock (total 3-bearrings in the head)
| Technical data and specifications for medium and heavy duty lathe (Geared V-Belt Driven) | |||
| Specification | Medium duty (Under-counter) | ||
| Bed Length | 4-1/2 feet | 6 feet | |
| Bed type | 2 V 2 flat | 2 V 2 flat | |
| Bed width | 275(11") | 275(11") | |
| Height of centre | 9" | 9" | |
| Swing over bed | 350mm | 350mm | |
| Swing over cross slide | 200mm | 200mm | |
| Admit between centre | 487mm | 940mm | |
| No.of spindle speed/8 | 8 | 8 | |
| RPM(low/high) | 45-750 | 45-750 | |
| Motor Power | 2hp | 2hp | |
| Wight(approx) | 700kg | 800kg | |
GRADE 25 HARDENED AND GROUND BED GUIDEWAYS.HARDENED & GROUND ALLOY STEEL GEARS & SPINDLE IN HEAD STOCKHARDENED & GROUND TAIL STOCK RAMALL CRITICAL COMPONENTS LIKE SHAFTS, GEARS, PINS, LEAD SCREW ARE MADE OUT OF EN-8/ EN-9 ALLOY STEELACCURACY CONFORMS TO INDIAN STANDARD No. I.S. : 1878 (PART - l) 1993.
Salient Features:
IS.20/25 graded castingRigid and box section type 240 mm wide bed provides maximum torsional stiffness.Rigid and accurate, alloy steel hardened and ground main spindle mounted on precision taper roller bearings & ball bearings.Forced lubrication in universal feed gear box. Apron with oil bath.Thread and feed mechanism interlocked (Only one can be engaged a time).Camlock spindle nose (DI-4 type)Overload Protection through suitable relays and contractors.Switch shaft lever fix at carriage to rev. forward & stopped main spindle.
Built-in Accuracy:All major castings are artificially seasoned for retaining built-in accuracy.Critical components precision machined on imported mother machines.Induction hardened and alloy steel gears of head stock mounted on precision spined shaft and running in oil bath.Flame hardened and ground bed for sustained accuracy.Alloy steel lead screw threads produced on WMW thread milling machine.Each machine is tested to IS-1878 (Part) 1993.
Versatility:
Built-in gap bed.Universal feed gear box for easy selection of wide range of feeds and threads through levers. No change gears required.Instantaneous spindle reversal while threading.Wide variety of optional accessories for higher productivity.
Mayapuri, Delhi 