GST : 19APFPP2054M1ZI
Verified
Write a Review
Our Products
Gates
1 Products availableBolts
1 Products availableIron Pipes
1 Products availablePlumbing & Pipe Fittings
1 Products availableWe are leaders in the market for providing best range of High Tension Pin
ductile iron pipe is pipe made of ductile cast iron commonly used for potable water transmission and distribution. This type of pipe is a direct development of earlier cast iron pipe, which it has superseded.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 30 DAYS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, ,
Delivery Time : 30 DAYS
Ms, ss, nut bolt washer.
Additional Information:
Payment Terms : L/C, D/A
Contact us for immaculate quality Zero Velocity Valves at competitive rates. We are a reliable Manufacturer and Supplier of Zero Velocity Valves in West Bengal. The Zero Velocity Valves offered by us is designed to arrest the forward moving water column at zero movement i.e. when its velocity is zero and before any return velocity is established. Bulk orders of the Valves are processed by us as per the specific requirements of buyers.
The main advantages of Zero velocity valves are :
Purpose of Zero Velocity Valve :Zero velocity valves are developed to eliminate water hammer problems. In common practices swing check valves are installed on the pump discharge end. Theoretically, swing check valves close quickly when the pump is shut off by actually not quick enough to prevent reversal velocity of flow. The flap of the swing check valves will slam against its body seat and will cause noise, vibration, pipe stressing and seat damaging. All these hindrance can be controlled by use of spring return zero velocity valve.
Application & Location of Zero Velocity Valve :Zero velocity valve has function to problem for limiting water surge after power failure. Locations of the valves have therefore to be based on the results of the analysis of water column separation.Zero velocity valves are so placed that the entire length of water column is suitably divided in spite of differing gradients and undulations. More than one valve may be required in such cases.Zero velocity valve can be mounted in any position i.e. Horizontal, vertical or inclined pumping main as well as gravity main, due to to the center guided spring assisted designed. This eliminates the problems arising from from installing a valve in "Wrong" orientation or the necessity of changing existing lines to accommodate the valve design. Inventory requirements are reduced because one valve design can be used in a wide variety of application, regardless of the valve's orientation in the line (When the valve is used in vertical downward flow position, a heavier spring is simply substituted to compensate for the weight of the disc and stem).
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 30 DAYS
price list for ductile iron resilient seated gate valve d.i (ggg-50) resilient seated (soft seated, gate valves as pe is 14846/2000 pd. p.n 1.6 non-rising spindle of ss- aisi- 410 with g.m nut e.p.d.m moulded wedge 100% leak proof flanged drilled as per is: 15538 table iv & vi with fba coated with epoxy prints colour blue with hand wheel operted.
Additional Information:
Payment Terms : Western Union, D/P, L/C, T/T, D/A
The company stands tall among the reputed Manufacturers and Suppliers of Single Faced Sluice Gates in West Bengal. The Single Faced Sluice Gates are extensively used in water supply, waste water applications, water treatment, intake wells, pumping stations, drainage works, irrigation cannels, effluent treatment, sewage treatment system, flood control, etc. We are capable of delivering bulk orders of the Single Faced Sluice Gates within the allocated time.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Delivery Time : 30DAYS
Guide Line For Selection Of Sluice Gates
|
Application |
Suitable Water head |
Mounting |
Specification |
|---|---|---|---|
|
For isolation of flow in and out of a closed condutit. |
Seating / on seating water head |
Spigot back wall mounted |
IS : 3042 |
|
For isolation of flow in and out of a closed condutit. |
Seating / on seating 7 unseating / off-seating water head |
Flange back face wall thimble mounted |
IS : 13349, Awwa C 501 / Awwa C 560 Bs : 7775 |
|
For isolation of flow in and out of an open channel |
Seating / on seating water head |
Channel side wall mounted |
Awwa C 513 |
|
For modulation of flow in and out of a closed condutit |
Seating / on seating & unseating / off-seating water head |
Flange back face wall thimble mounted |
IS : 13349, Awwa C 501 / awwa C 560, BS : 7775 |
|
For drainage outfall out of a closed condutit |
Unseating / off-seating water head |
Flange back face wall thimble mounted |
- |
Note : Above applications are cover most general uses. For if any another application & installtion requirement needs a different type of gate as maintioned above. Please fill free contact modern with your actual problem, application & specification.
ductile iron pipe is pipe made of ductile cast iron commonly used for potable water transmission and distribution. This type of pipe is a direct development of earlier cast iron pipe, which it has superseded. . Typically, the pipe is manufactured using centrifugal casting in metal or resin lined moulds.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
in order to keep pace with never ending demands of the customers, our company is instrumental in supplying and trading an excellent quality assortment of high tension pin insulator in cuttack, odisha, india. Our high tension pin insulator find its best usage in electrical industry & other related places. These are offered at market leading prices to our esteemed customers.
product details:voltage : 33kwmaterial : ceramic insulatorlow frequency flashover voltage(dry) : 110 kvlow frequency flashover voltage(wet) : 85 kvcolor : brown
established in 2014 , radhamadhav engineers & traders has made a name for itself in the list of top suppliers of horn gap fuse, electrical transmission line goods in india. The supplier company is located in cuttack, odisha and is one of the leading sellers of listed products.radhamadhav engineers & traders is listed in trade india's list of verified sellers offering supreme quality of 11 kv horn gap fuse, 33 kv horn gap fuse etc. Buy horn gap fuse, electrical transmission line goods in bulk from us for the best quality products and service.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 30 DAYS
Mr. Subrata Panja (India Engineering Concern)
Ichapur Road, Canal Side, P.O. - Santragachi, City - Howrah Sadar Kolkata, West Bengal - 711104, India
Share us via
View Contact Number 
