Our Products
Gates
1 Products availableBolts
1 Products availableIron Pipes
1 Products availablePlumbing & Pipe Fittings
1 Products availableWe offer a complete product range of Double Air Valve With Inbuilt Isolating Valve, Tamper Proof Air Valves, Swing Check Type Reflux Valve, Wafer Type Butterfly Valve and Air Cushion Valve
parent basic material cast iron, s.g. Iron, cast steel type of valve construction single small orifice, single large orifice, double large & small orifice, double large & small orifice with inbuilt isolating stop valve, kinetic double large & small orifice with separate isolating mitre bevel geared isolating sluice valve, tamper proof double orifice air valve. Manufacturing standard is : 14845, awwa c 512 fluid application clear water, sewage & effluent, raw water end flange standard is : 1538, is : 6392, bs : 10, ansi b 16.1, ansi gb 16.5, bs : 4504, awwa c 207 or any other std. Screwed end standard is : 554, bs : 4504, awwa c 207 or any other std. Screwed end standard is : 554, bspt, npt etc. Type of wedge solid & taper, flexible, double disc manufacturing range of size 25 mm to 200 mm, rating pn 10, pn 16 & pn - 25.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Delivery Time : 30 DAYS
cast iron, cast steel, stainless steel, ductile iron body ss ball, g.m ring.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 30 DAYS
Swing Check Type Reflux Valve is a device which restricts the flow in one direction only. Our company is an established Manufacturer and Supplier of Swing Check Type Reflux Valves in West Bengal. Rigorous quality-tests ensure that only defect-free Swing Check Type Reflux Valves reach the buyers. Owing to our reliable logistics network, we are capable of delivering bulk orders of the Reflux Valves within the stipulated time.
Characteristic Features :
Additional Arrangement :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Specifications
Parent / Basic Material |
Cast Iron, S.G. Iron, Cast steel, Fabcated steel |
---|---|
Type of construction |
4 door swing check with inbuilt duck foot. |
Manufacturing standard |
IS : 5312, Part – 2 (NB 500 mm to NB 1200 mm) |
General Fluid application |
Clear water, irrigation raw water, sewage water |
End flange standard |
IS : 1538, IS : 6392, BS : 4504, BS : 10, Ansi B 16.1, Ansi B 16.5, Awwa C 207 or any other std. |
Type of Disc / Flap |
Solid flap with integral hinge, saperate hinge |
Manufacturing range of size |
500 mm to 2000 mm. |
Rating |
Pn – 4, Pn – 6, Pn – 10 & Pn - 16 |
Download
Butterfly Valves are designed to isolate / control the flow medium in both directions. We are an eminent Manufacturer and Supplier of Butterfly Valves in West Bengal. The Butterfly Valves offered by us feature robust construction and one stainless steel seat ring is fitted in the flow path. In order to meet the bulk and urgent requirements of buyers, we maintain a large stock of Butterfly Valves at our spacious warehouse.
Details :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Delivery Time : 30 DAYS
Specifications
Manufacturing Standard |
IS : 13095, Bs : 5155, BS En : 593, BS : 3952, API : 609 Awwa C 504, Din : 3354, Mss – Sp 67, Ipss : 1-06-012 IS : 7326 (Part – 1) |
---|---|
Parent / Basic Material |
Cast Iron, S.G.Iron, Mild Steel fabricated, cast steel, cast stainless steel, fabricated stainless steel, nevel brass, gunmetal, bronze, alloy cast iron. |
Type of Construction of Shaft |
Double Eccentric, concentric, Triple Eccentric |
Construction of blade design |
Flat slab blade, spherical blade, concial blade, Lattice blade |
Construction of disc seal |
Flat round nose, "L" round nose, "T" round nose, Self energising seal, musical note seal, hose seal, 'V' nose T shape seal, metal to metal deposited seal, metal to metal flexible seat seal, double seal. |
Construction of Body |
Double flanged short, double flanged long, wafer short, wafer medium, wafer long, wafer |
Construction of End conn. |
Double flanged, wafer, Lugged screw, lugged through bolt. |
Type of seat |
Metal to rubber resilient seat, Slim Seal resilient seat, metal to metal, dual seal. |
Type of Operator |
Manual Hand lever, Single Stage Worm gear box, double stage worm & spur gear box, Triple stage worm, spur & spur gear box, electric actuator, pneumatic actuator rotary, pneumatic double acting cylinder (Push-pull), hydraulic actuator / cylinder |
End flange standard |
IS : 1538, IS : 6392, BS : 10, Ansi B 16.1, Din std. Ansi B 16.5, Bs : 4504, Awwa C 207 or any other std. |
Manufacturing Range of size |
50 mm to 3000 mm. |
Rating |
Pn – 0.4, Pn – 1.0 & Pn – 1.6 |
General Fluid application |
Clear Water, Gas, Air, Oil, Chemical etc. |
Non std. Product |
We can supply any rest international standard or any non standard specification as per client requirements. |
Download
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Foot Check Valves</strong> are designed to allow flow of liquid only in one direction. We are an eminent Manufacturer and Supplier of Foot Check Valves in West Bengal. The Foot Check Valves we make available are generally placed at the lower end of the suction pipe of a pump. We are capable of delivering bulk orders of the Foot Check Valves within the stipulated time.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Delivery Time : 30 DAYS
Specifications
Parent / Basic Material |
Cast Iron, S.G. Iron, Cast Steel, Mild steel |
---|---|
Type of construction |
Flanged end / Screwed end, lift / Swing type disc foot check valve with CI / Ms strainer. |
Manufacturing Standard |
IS : 4038, IS : 10805 |
General Fluid application |
Clear water, Gas, Air, oil, Chemical etc. |
End flange standard |
IS : 1538, IS : 6392, Bs : 10, Ansi B 16.1, Ansi B 16.5, Bs : 4504, Awwa C 207 or any other std. |
Type of disc |
Single disc swing & lift, double disc swing & lift |
Manufacturing Range of size |
25 mm to 450 mm |
Rating |
Pn – 2, Pn – 4, Pn – 6 & Pn - 10 |
Straining Area |
At least equal to 2.5 times of the nominal bore area. |
Download
Sluice Valves are used to isolate the flow of liquid in both the directions. Our company has cemented its presence among the trusted Manufacturers and Suppliers of Sluice Valves in West Bengal. The Sluice Valves offered by us have robust construction and high durability. In full open position the Valve facilitates clear interrupted full bore flow path resulting in minor / low head loss.
Characteristic Features :
Optional Arrangement :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Delivery Time : 30 DAYS
Specifications
Parent / Basic material |
Cast Iron, S.G.Iron |
---|---|
Type of construction |
Inside screw, Non-Rising stem, |
Manufacturing Standard |
IS : 14846, BS : 5150, BS : 5163, BS : 1735, Awwa C 500, Din : 3352, IS : 11335 |
General Fluid application |
Clear water, Gas, Air, oil Chemical etc. |
End flange Standard |
IS : 1538, IS : 6392, BS : 10, Ansi B 16.1 Ansi B 16.5, BS : 4504, Awwa C 207 or any other std. |
Type of wedge |
Solid & taper, Flexible, double disc |
Manufacturing Range of size |
40 mm to 2500 mm |
Rating |
Pn – 10 & Pn - 16 |
Download
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : 30 DAYS
diaphragm valves are used on shut-off and throttling service for liquids, slurries and vacuum/gas.
the seal is achieved by a flexible membrane, usually elastomer, and possibly reinforced with a metal part. The membrane is tensed by the effect of a stem/compressor with lineal movement until contact is made against the seal of the body.
the operating parts of the diaphragm valve are isolated from the flow. This makes this valve suitable for viscous flows and also hazardous, abrasive and corrosive flows as its sealing system avoids any contamination towards or from the environment.
diaphragm valves are available in a wide variety of metals, solid plastics, plastic, rubber and glass linings. They are well suited to the handling of multiple chemical applications both clear fluids as well as slurries.
the diaphragm valve has an extended use for applications at low pressures and slurry fluid where most other kinds of valves corrode or become obstructed.
it is a quick opening valve.
there are two types of diaphragm valves:
weir: the weir diaphragm valve can be used for either off/on and throttling services
straightway: named also straight-thru is only used for on/off services.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Dual Plate Check Valve is known for its high performance and durability. Our company is a nonpareil Manufacturer and Supplier of Dual Plate Check Valves in West Bengal. The Dual Plate Check Valves we make available are stronger, lighter and smaller than conventional swing check valve. Our Dual Plate Check Valve uses a special unique design spring for significant improvement in valve response. Buyers can obtain the Valves at reasonable rates.
Characteristic Features :
Additional Arrangement :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Delivery Time : 30 DAYS
Specifications
Parent / Basic material |
Cast Iron, S.G. Iron, Cast Steel, St. Steel Fabcated steel |
---|---|
Manufacturing standard |
Api 594, Api 6D & Api 598 (Testing) |
General Fluid application |
Clear water, Sewage water, Gas, Air, oil, chemical |
End flange standard |
IS : 1538, IS : 6392, Bs : 4504, BS : 10, ansi B 16.1, Ansi B 16.5, Awwa C 207 or any other std. |
Type of disc / flap |
Double door solid flat flap with integral hinge. |
Manufacturing range of size |
150mm to 2000mm. |
Rating |
Pn – 4, Pn – 6, Pn – 10 & PN - 16 |
Download
Additional Information:
Payment Terms : L/C, D/P,
Delivery Time : As per order Day