• Ideal for general purpose fixing & the tapper nut angle is suitable for maximum expansion in all subtracts.
• For fixing in concrete, solid bricks, perforrated, hollow blocks.
• Preassembled for quick and easy installation, high holding power.
• Available in : Full thread/half thread bolt.

• Feature : Designed with on outside of lower U-strap so the yoke cannot slide towards the center of the bolt, thus bending of the pipe is minimised. Spacer sleeve used for size 16 to 36.
• Installation : Hanger load nut above clevis must be tightened securely to assure proper hanger performance.

• Brick frame fixing is used in cladding (metal frames/structure) roofing, door & window frames.
• The anchor body is made of cadmium-free polymide & screw is made of galvanised steel or stainless steel.
• Best fixing in concrete, solid briks, sand lime briks & hard natural stone.

• Preassembled for quick and easy installation can be used in thin section of concrete or solid masonry.
• Head styles for every application.
• The washer is wide, which gives a bigger allowance for pieces or structures to be fastened.
• The cone has some grooves (milling) in order tomprevent the anchor from loose or spin movement after fixing into the hole and ready to expansion

• Quick and series installation.
• Used when strict tolerance have been specified.
• Useful where aesthetics and safety both are required.
• Fixing throgh the fixture it possible.
• Available in SS 304 & 316 also

• It is used for fixing light celling to the roof.
• The combination of these three items maintains the level of the roof hanging from the celling.
• Used mostle in concrete.

• Nylon nail anchors are ideal for a wide variety of light load fastening in wood.
• Hardboard, plaster, metal, cinder block, brick, slate, marble, plastic, tile, glass and concrete.
• Its unique design allows the nail to expand the anchor uniformly in the hole.

• Tapered expansion nut made from high grade zinc alloy die casting. Galvanized steel sleeve fitting with steel machine screw and colors cap.
• The frame anchors are suitable for window and door frames.
• For fixing of plastic, wood, alunminium window and door frames to concrete, hollow blocks and checker brick.

• Electro-galvanised .
• Application : Easy installation especially for suspending pipes in fire fighting systems.
• Advantages : On

• Material : Low Carbon Steel.
• Surface : zinc plated(Cr6 to Cr3), yellow zinc plated, black oxide, black zinc plated, hot dip galvanization.
• Hex Socket is use to fix these hex self drilling screw by fixing this socket in pneumatic. It is available for hex head self drilling screw #8, 10, 12, 14.

We are the main supplier of this product.

• Material: Low Carbon Steel.
• Surface : zinc plated(Cr6 / Cr3), yellow zinc plated, black oxide, black zinc plated, hot dip galvanization.
• Phillips Bit is a widely used bit to fix dry wall screws and chip board screws made of high grade steel.
• It is available in single side length of 25 mm and double side length of 65 mm.

• Employing high quality alloy steel for drilling body and tungsten carbide for drilling tip and in combination with various types of electric hammer, the drill is noe of the most efficient tools suitably and widely used for hole drilling in hard materials like concrete/brick in construction & installation industries. Available in sand blast, bright finish, black oxide, brown color etc.

• Spring Toggle is use for fixing into cavity walls and cellings.
• Available in various versions.
• Installing overhead lights ad othe fixing.
• Security timber to plaster board walls.

• Ideal for general purpose fixing & the tapper nut angle is suitable for maximum expansion in all subtracts.
• For fixing in concrete, solid bricks, perforrated, hollow blocks.
• Preassembled for quick and easy installation, high holding power.
• Available in : Full thread/half thread bolt.

• Feature : Designed with on outside of lower U-strap so the yoke cannot slide towards the center of the bolt, thus bending of the pipe is minimised. Spacer sleeve used for size 16 to 36.
• Installation : Hanger load nut above clevis must be tightened securely to assure proper hanger performance.

• Brick frame fixing is used in cladding (metal frames/structure) roofing, door & window frames.
• The anchor body is made of cadmium-free polymide & screw is made of galvanised steel or stainless steel.
• Best fixing in concrete, solid briks, sand lime briks & hard natural stone.

• Preassembled for quick and easy installation can be used in thin section of concrete or solid masonry.
• Head styles for every application.
• The washer is wide, which gives a bigger allowance for pieces or structures to be fastened.
• The cone has some grooves (milling) in order tomprevent the anchor from loose or spin movement after fixing into the hole and ready to expansion

• Quick and series installation.
• Used when strict tolerance have been specified.
• Useful where aesthetics and safety both are required.
• Fixing throgh the fixture it possible.
• Available in SS 304 & 316 also

• It is used for fixing light celling to the roof.
• The combination of these three items maintains the level of the roof hanging from the celling.
• Used mostle in concrete.

• Nylon nail anchors are ideal for a wide variety of light load fastening in wood.
• Hardboard, plaster, metal, cinder block, brick, slate, marble, plastic, tile, glass and concrete.
• Its unique design allows the nail to expand the anchor uniformly in the hole.

• Tapered expansion nut made from high grade zinc alloy die casting. Galvanized steel sleeve fitting with steel machine screw and colors cap.
• The frame anchors are suitable for window and door frames.
• For fixing of plastic, wood, alunminium window and door frames to concrete, hollow blocks and checker brick.

• Electro-galvanised .
• Application : Easy installation especially for suspending pipes in fire fighting systems.
• Advantages : On

• Material : Low Carbon Steel.
• Surface : zinc plated(Cr6 to Cr3), yellow zinc plated, black oxide, black zinc plated, hot dip galvanization.
• Hex Socket is use to fix these hex self drilling screw by fixing this socket in pneumatic. It is available for hex head self drilling screw #8, 10, 12, 14.

We are the main supplier of this product.

• Material: Low Carbon Steel.
• Surface : zinc plated(Cr6 / Cr3), yellow zinc plated, black oxide, black zinc plated, hot dip galvanization.
• Phillips Bit is a widely used bit to fix dry wall screws and chip board screws made of high grade steel.
• It is available in single side length of 25 mm and double side length of 65 mm.

• Employing high quality alloy steel for drilling body and tungsten carbide for drilling tip and in combination with various types of electric hammer, the drill is noe of the most efficient tools suitably and widely used for hole drilling in hard materials like concrete/brick in construction & installation industries. Available in sand blast, bright finish, black oxide, brown color etc.

• Spring Toggle is use for fixing into cavity walls and cellings.
• Available in various versions.
• Installing overhead lights ad othe fixing.
• Security timber to plaster board walls.