INDANA STEEL PVT.LTD

Khar, Mumbai, Maharashtra

Any process industry consists of a huge piping network. These lines undergo a lot of physical fatigue daily. This sometimes leads to flange failure & cause it to spray out the hazardous chemicals & hot fluids at high pressure which in turn leads to injury of workforce & damage of equipments. To prevent these complications, Flange guards are installed on Flange Joints to contain the spray outs & eliminate any spray related injury or damage.

As you can see in the picture, Box type PP Flange Guards are designed to completely enclose the flanges including the stud bolts & nuts. PP Box Type Flange Guards are made from UV Resistant/Stabilized Polypropylene. UV Stabilization gives enhances the life of these flange guards.

These Box Type Flange Guards are easy to install. A single box flange guard comprises of two equal halves. These halves are placed on the flanges from the opposite sides & are locked with the help of simple bolts on the edges.

The Box Type Plastic Flange Guard is extremely efficient in providing protection spray outs & sudden splashes. These PP Box Type Flange Guards have a three fold built-in safety mechanism which completely dissipates the pressure of splash & provides maximum protection to the working staff & expensive equipment.

1) These guards completely cover the flanges from the sides including the stud bolts. This eliminates the risk of any lateral spray out escaping from the guards. This enclosed setup of the PP Box Type Flange Guards also removes any risk of mist formation.

2) The circular design of the box ensures that the splash smoothly moves around the wall of the flange guard. This helps in gradual & effective reduction of pressure & minimizes & risk of spillage.

3) These PP Box Type Flange Guards can contain & collect liquids up to a certain volume. Leakage from flanges joints carrying combustible fluid lines like oil & fuel lines which are directly placed above hot surfaces & electrical equipment. Is a potential fire hazard. These flange Guards contains the splash & prevents it from dripping on these lines.

These flange guards are also available with drains which can drain the leak to a safe disposal bin.

B7 B16

INDANA STEEL Is The Manufacturer Of Fastening Systems Like Threaded Stud Bolts, Foundation Bolts, J Bolts, Hex Bolts Etc.Stud Bolts Manufactured By INDANA STEEL Carry A Warranty Of 24 Months.Thus Quality Will Not Be A Challenge For The Procurement Team When You Are Buying From Us.We Thoroughly Understand The Catastrophic Damage A Sub Standard Fastener Can Cause.

Full Threaded Stud Bolts:

Stud bolts are threaded rods used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement primarily i.e. length and the diameter of stud Bolt to be used for the tightening of flanges.Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define clearly every specific criteria starting from Material grade, Heat treatment, Mechanical & Chemical properties, Stamping, Inspection, acceptance and rejection requirements.The most common grade that we work with is ASTM A 193.We actively manufacture the following grade of stud bolts:

Process To Purchase Indana Stud Bolts For Your Industrial Needs:

1) Email Us Your Complete Stud Bolt Requirement Oninfo@indanasteel.comalong with the delivery time required.

2) We will respond back with a competitive quote in the next 12 hours.

3) After the receipt of a confirmed Purchase Order From your side, we will deliver the material within the agreed delivery time along with complete quality & material test certificate.

Full Threaded Stud Bolts:

Stud bolts are threaded rods used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement primarily i.e. length and the diameter of stud Bolt to be used for the tightening of flanges.Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define clearly every specific criteria starting from Material grade, Heat treatment, Mechanical & Chemical properties, Stamping, Inspection, acceptance and rejection requirements.The most common grade that we work with is ASTM A 193.We actively manufacture the following grade of stud bolts:

ASTM A193 Gr B7

ASTM A193 Gr B7 stud Bolt are manufactured from chromium molybdenum ferritic alloy. B7 stud bolt have a standard temperature range of minus 29 degree Celsius to 427 degree Celsius and are used in flanges of standard ASTM A105. Recommended nuts for b7 stud bolts are grade 2H Hex nuts.
GRADE B7 stud bolts are generally supplied in finishes such as Plain, Blackening, Zinc plated(Electroplated), Cadmium(Yellow), Teflon coating(blue) etc according to the nature of application and environment.

ASTM A193 B16 Stud Bolts

Grade B16 stud bolt are used in high temperature & high pressure environment.These Stud Bolts are very similar to Grade B7 Stud bolts but the alloy contains an additional element called Vanadium. Vanadium brings to the alloy high strength and heat resistance which is very critical to Grade B16 as these are used in very high temperature environment.Grade B16 stud bolts can with stand temperatures up to 537 degree Celsius.Recommended Hex nuts for ASTM A193 B16 stud bolt are Grade 4 or Grade 7 nuts.Grade 4 nuts are slowly being substituted with Grade 7 nuts.Grade 7 nuts have chromium in it which gives it high strength and increases its corrosion resistance.Grade B16 stud bolts are generally used with ASTM A283 or GrF11, F22 flanges.Brand Name Under which We Produce Stud Bolts Are Indana Stud Bolts, Indana Fasteners, JJ Stud Bolts, JJ Fasteners & RF Stud Bolts

SS STUD BOLTS

We Manuufacture Stainless Steel SS Stud Bolts In India. Stainless Steel SS Stud Bolts Are Used In Various Industries In India. SS Stud Bolts Are Generally Corrosion Free & Are Available In Various Length & Sizes. To Get A Quote For YourStain Less SS Stud Bolt Requirement, Contact Us On:info@indanasteel.com

HSFG BOLTS

We Are A Manufacturer Of HSFG Bolt In India. High Tensile Alloy Rounds Are Used Fo HSFG Bolts. These Are Used As Structural Fasteners. For This Reason Reliability Of HSFG Fasteners Is Very High. We Make Sure That All Our Hsfg Bolts Are Made From The Best Alloy Steel & Goes Through A Series Of Checks. Hsfg Bolts Are Also Known As High Strength Friction Grip Bolt.

Hex Bolts

INDANA STEEL Is A Leading Manufacturer Supplier & Exporter Of Hex Bolts From India To China, Usa, Saudi Arabia, Dubai, Australia. Hex Bolts Are Similar To Threaded Rod But Have A Hex Head On One End. Hex Bolts Aare Laso Mated With A Singe Nut And A Washer Is Reyoired. HEx Nuts Are Available In Various Materials Like High Tensile (ASTM A193 B7 B16 Hex Bolts) Ms Hex Bolts, SS Hex Bolts, GI Hex Bolts.

Foundation Bolts & Anchor Bolts:

Anchor Bolts & Foundation Bolts Are Used In Constructions. Foundation & Anchor Bolts Are Used To Firmly Attach Objects With The Concrete Structre Of The Building. Foundation & Anchor Bolts Helps In Stabilising The Structure Of The Building & Hence Proper Care Must Be Taken While Manufacturing Foundation & Anchor Bolts. Foundation & Anchor Bolts Are Used For Both Industrial & Residential Structures. We Are A Leading Manufacture & Exporter Of Foundation & Anchor Bolts To China Usa Saudi Arabia Dubai, Australia.

Threaded Rods

Threaded Rods Are Used As A Fastener & Also For Various Industrial Applications. Threaded Rods Are Made From Various Material Like MS Threaded Rod, SS Threaded Rod, Gi Threaded Rods, High Tensile Tensile Thereaded Rods. Threaded Rods Are Available In Various Sizes & Diffrent Length. We Also Offer Various Coating On Our Threaded Rods Like PTFE, Xylan Etc. We Export Our ASTM A193 B7 B7M B16 Stud Bolts To China Saudi Arabia, Dubai, UAE, ABU DHABI, Qatar, Riyadh, AL Jubail, Australia, USA, UK, Scotland, Portland.

Download ASTM A193 Grade B7 Stud Bolts PropertiesDownload ASTM A193 Grade B16 Stud bolts propertiesDownload ASTM A193 Grade B7 B16 Studs & nuts properties

We also provide the following coating on our ASTM A193 B7 B7M B16stud bolts when requested by the client

B7 B16

INDANA STEEL Is The Manufacturer Of Fastening Systems Like Threaded Stud Bolts, Foundation Bolts, J Bolts, Hex Bolts Etc.Stud Bolts Manufactured By INDANA STEEL Carry A Warranty Of 24 Months.Thus Quality Will Not Be A Challenge For The Procurement Team When You Are Buying From Us.We Thoroughly Understand The Catastrophic Damage A Sub Standard Fastener Can Cause.

Full Threaded Stud Bolts:

Stud bolts are threaded rods used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement primarily i.e. length and the diameter of stud Bolt to be used for the tightening of flanges.Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define clearly every specific criteria starting from Material grade, Heat treatment, Mechanical & Chemical properties, Stamping, Inspection, acceptance and rejection requirements.The most common grade that we work with is ASTM A 193.We actively manufacture the following grade of stud bolts:

Process To Purchase Indana Stud Bolts For Your Industrial Needs:

1) Email Us Your Complete Stud Bolt Requirement Oninfo@indanasteel.comalong with the delivery time required.

2) We will respond back with a competitive quote in the next 12 hours.

3) After the receipt of a confirmed Purchase Order From your side, we will deliver the material within the agreed delivery time along with complete quality & material test certificate.

Full Threaded Stud Bolts:

Stud bolts are threaded rods used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement primarily i.e. length and the diameter of stud Bolt to be used for the tightening of flanges.Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define clearly every specific criteria starting from Material grade, Heat treatment, Mechanical & Chemical properties, Stamping, Inspection, acceptance and rejection requirements.The most common grade that we work with is ASTM A 193.We actively manufacture the following grade of stud bolts:

ASTM A193 Gr B7

ASTM A193 Gr B7 stud Bolt are manufactured from chromium molybdenum ferritic alloy. B7 stud bolt have a standard temperature range of minus 29 degree Celsius to 427 degree Celsius and are used in flanges of standard ASTM A105. Recommended nuts for b7 stud bolts are grade 2H Hex nuts.
GRADE B7 stud bolts are generally supplied in finishes such as Plain, Blackening, Zinc plated(Electroplated), Cadmium(Yellow), Teflon coating(blue) etc according to the nature of application and environment.

ASTM A193 B16 Stud Bolts

Grade B16 stud bolt are used in high temperature & high pressure environment.These Stud Bolts are very similar to Grade B7 Stud bolts but the alloy contains an additional element called Vanadium. Vanadium brings to the alloy high strength and heat resistance which is very critical to Grade B16 as these are used in very high temperature environment.Grade B16 stud bolts can with stand temperatures up to 537 degree Celsius.Recommended Hex nuts for ASTM A193 B16 stud bolt are Grade 4 or Grade 7 nuts.Grade 4 nuts are slowly being substituted with Grade 7 nuts.Grade 7 nuts have chromium in it which gives it high strength and increases its corrosion resistance.Grade B16 stud bolts are generally used with ASTM A283 or GrF11, F22 flanges.Brand Name Under which We Produce Stud Bolts Are Indana Stud Bolts, Indana Fasteners, JJ Stud Bolts, JJ Fasteners & RF Stud Bolts

SS STUD BOLTS

We Manuufacture Stainless Steel SS Stud Bolts In India. Stainless Steel SS Stud Bolts Are Used In Various Industries In India. SS Stud Bolts Are Generally Corrosion Free & Are Available In Various Length & Sizes. To Get A Quote For YourStain Less SS Stud Bolt Requirement, Contact Us On:info@indanasteel.com

HSFG BOLTS

We Are A Manufacturer Of HSFG Bolt In India. High Tensile Alloy Rounds Are Used Fo HSFG Bolts. These Are Used As Structural Fasteners. For This Reason Reliability Of HSFG Fasteners Is Very High. We Make Sure That All Our Hsfg Bolts Are Made From The Best Alloy Steel & Goes Through A Series Of Checks. Hsfg Bolts Are Also Known As High Strength Friction Grip Bolt.

Hex Bolts

INDANA STEEL Is A Leading Manufacturer Supplier & Exporter Of Hex Bolts From India To China, Usa, Saudi Arabia, Dubai, Australia. Hex Bolts Are Similar To Threaded Rod But Have A Hex Head On One End. Hex Bolts Aare Laso Mated With A Singe Nut And A Washer Is Reyoired. HEx Nuts Are Available In Various Materials Like High Tensile (ASTM A193 B7 B16 Hex Bolts) Ms Hex Bolts, SS Hex Bolts, GI Hex Bolts.

Foundation Bolts & Anchor Bolts:

Anchor Bolts & Foundation Bolts Are Used In Constructions. Foundation & Anchor Bolts Are Used To Firmly Attach Objects With The Concrete Structre Of The Building. Foundation & Anchor Bolts Helps In Stabilising The Structure Of The Building & Hence Proper Care Must Be Taken While Manufacturing Foundation & Anchor Bolts. Foundation & Anchor Bolts Are Used For Both Industrial & Residential Structures. We Are A Leading Manufacture & Exporter Of Foundation & Anchor Bolts To China Usa Saudi Arabia Dubai, Australia.

Threaded Rods

Threaded Rods Are Used As A Fastener & Also For Various Industrial Applications. Threaded Rods Are Made From Various Material Like MS Threaded Rod, SS Threaded Rod, Gi Threaded Rods, High Tensile Tensile Thereaded Rods. Threaded Rods Are Available In Various Sizes & Diffrent Length. We Also Offer Various Coating On Our Threaded Rods Like PTFE, Xylan Etc. We Export Our ASTM A193 B7 B7M B16 Stud Bolts To China Saudi Arabia, Dubai, UAE, ABU DHABI, Qatar, Riyadh, AL Jubail, Australia, USA, UK, Scotland, Portland.

Download ASTM A193 Grade B7 Stud Bolts PropertiesDownload ASTM A193 Grade B16 Stud bolts propertiesDownload ASTM A193 Grade B7 B16 Studs & nuts properties

We also provide the following coating on our ASTM A193 B7 B7M B16stud bolts when requested by the client

T joints and elbow are part of pipe fittings. T joints are primarily used for branching or mixing fluids. Elbows are used to join puppies at angles. These are small but important parts of a piping system without which a piping system cannot function. Like most joints, these joints are also subject to leaks. A number of times these fittings are installed above man height, which makes them dangerous in the event of a leak. These pipe spray shields are essential to ensure pipeline safety.

PVC Spray Protection and Tie Cords are self-extinguishing, nonflammable, and non-combustible. As an organisation we believe in safety for all and these shields are part of our range of affordable flange safety shields. These shields come in a standard Guarantee of 18 months.

What Makes A Ships Piping System Difficult Is Small Confined Spaces. It Gets Very Hard To Operate In Case Of A Leak Because Of Inadequate Spaces And Limited Head Or Body Room Availability. A Ship Shield Will Diffuse The Pressure Of The Dangerous Fluid Or Gas Released. It Will Keep The Operator Safe And Prevent The Liquid From Spilling Onto Your Electrical Boxes And Other Piping Assemblies Which Might Lead To Fire Or Accidents.

A vessel piping system consists of lines which move around pumps, deck and tanks. These pipe lines carry and discharge fluids as per process requirement. Pipelines running from pump to the tanks are known as bottom pipe lines, from the deck to the tanks are called drop lines, Pumps to the deck are called riser pipelines and piping on the deck is called deck pipe lines. These Shipping vessels have Valves installed for pressure regulation which are subject to a very high surge pressure during opening and closing. Theses valves operate on a controlled speed as any adventure may lead to a high pressure leak.

Flame Retardant Material Is Used In The Construction Of TheseSafety Ship Spray ShieldsKeeping In Mind Absolute Safety Of The Manpower At All Times.Aluminium And Silicon Insert Prevents Mist Formation And Resists Chemicals While Retaining The Flame Retardant Properties.Silicone Adds Thermal And Electrical Insulation To The Navy Shield.

Our Navy Shields Are Being Used By Luxury Cruise Ships Such As MV Celebrity Constellation, MV Celebrity Millennium And Many Others.

SOLAS:

International Maritime Treaty Which Ensures Ships Maintain A Minimum Safety Standard.INTERNATIONAL MARITIME ORGANIZATION:Regulatory Body Which Ensures That Best Safety Practises Are Followed By Ships And Enviromental Performance.

SOLAS Regulations

The IMO introduced new regulations concerning oil fuel arrangements through the SOLAS amendments. In particular, regulation 11-2 / 15.2.11 require that-

Oil fuel lines shall be screened or otherwise suitably protected to avoid, as far as possible, oil spray or oil leakages onto hot surfaces, into machinery air intakes or other sources of ignition. The number of joints in such piping systems shall be kept to a minimum.

INTERNATIONAL MARITIME ORGANIZATION

These shield are designed for the safe discharge of liquids that are flammable, and to prevent liquid discharge from joints on the electrical line. TheseShip Spray Shields & Guardsare made of multiple layers of PTFE coated fiber glass fabric with aluminum and silicone sheets stitched inside. Extreme care is taken to use material that does not support combustion and is flame retardant. The tying ropes used are also flame retardant. These flange spray guard rolls are available in 10 feet and 20 feet rolls.

Please note that Flange shields are used for safe discharge of liquid and are not an alternative for sealing pipe joints.

Similar to the Valves of the heart, In a piping system also Valves regulates, controls, isolates and directs the flow of the fluid. Valves alone account for almost 10 percent of the cost of total piping system. In ancient times tree branches were used to regulate water. The Roman Empire was unmatchable in early days in controlling and storage of fresh waters. In fact, the castellum was the first water Sewerage system in the historic city of Pompeii.The distribution and regulation of water from the aqueduct through 3 outlets was done by the castellum. Egg shaped Lead Pipe was used in the transportation of water.Unfortunately, theancient city of Pompeii was buried under the volcanic eruption of Mount Vesuvius in 79 AD. The excavations have led to the finding of bronze valves which were used to pump water uphill to the castellum.

In a Modern piping system Valves alone account for almost 10 percent of the cost of total piping system. Few types of Commonly used Industrial Valves:

• Ball Valves-Have spherical closure unit which allows flow of fluid when the bore is positioned in the direction of pipeline and closes when bore is perpendicular to the pipeline.
• Globe Valves- Are use primarily to stop, regulate or throttle the pressure of a fluid. They are linear motion valves and are commonly found in Ships.
• Gate Valves- Are designed to be fully opened or fully closed. They are not used for regulating pressure of a fluid. Commonly used in water and sewage systems.
• Butterfly Valves-The Quarter turn rotational motion valves. The Quarter turn provides complete closure or opening of the Valve.
• Check Valves- Mostly used in the Steam piping systems these valves allow the fluid to pass in one direction and blocking it in the reverse direction.

Most of the Valves leak and spray outs with time and is very common to the industrial setting. Primary reasons being:

1. Cannot be closed due to foreign particles, dust and debris.

2. Seat or the seal of the Valve gets damaged with time.

3. Maintenance failure.

These leakages have been d fined by various standards like API, ANSI, MSS, FCI etc.

Many of the catastrophic accidents in the past have been due to Valve leakages and subsequent splash. Industrial Valves Are regulating devices which at any given time are holding high pressure fluids. Primarily because of two reasons valve leaks are more dangerous compared to Flange leaks:1. Imagine a close valve leaking which is holding a high-pressure fluid whereas In most cases flange are subject to fluid movement.

2. Valves have been designed to operate so the worker interference is not limited whereas flanges have limited interference mostly during maintenance.

These reasons makes a Valve Spray out very dangerous. We have specially designed Valve Spray shields to contain these leaks and keep your manpower safe at all times. Installation of Valve Spray Shields and valve guards also increases you workers morale while handling these equipment. Valves shields come in three types of material commonly:

1. Tefloncoated fibreglass Spray shields with dual locking2. TeflonCoated Fibreglass Spray shields with visual inspection window and dual locking (Clear Type)3. Stainless steel Grade 316 shields for high temperature and highly corrosive environment.

Every Valve spray shield is tested for appropriate pressure requirement at our pressure testing rig. These Valve shields are specially stitched with Kevlar threads giving it very high strength. Cotton or nylon stitched valve guards may come out during a leak as these threads are not designed to handle such kind of environment and pressure. Material used in these Valve shields are flame resistant andTeflon/ Kevlar braided ropes give the valve shields its much-desired pressure holding strength. Every Indana Valve spray shield is a life saving and equipment saving device.

At INDANA, Your safety is our priority. Lastly the product pricing is very reasonable and cheapest in the Indian market. We believe in giving our Customers a better product at even better prices. Indana Flange Guards are uncompromising on quality.

info@indanasteel.com

PP Flange Guards
Description:UV Resistant PP Flange Guards By Indana are thicker than the rest. Also the UV Resistance is very high
Written by:Mr. Vipul ShahRating:5 out of 5

PP Flange Guards are safety spray shields manufactured from polypropylene. These flange guards are equipped with multigrip extensions & spacers to easily diffuse high pressure chemical spray outs. These PP Flange guards are used to protect the working staff & equipments from corrosive splashes of chemical & oil piping systems. The installation is very simple with adjustable latching slots.

Polypropylene is a thermoplastic whose invention is contented between Prof Karl Ziegler of Max Planck Institute, Prof. Giulio Natta of Milan polytechnic, Paul hogan & Robert Blanks of Phillips. Polymerising of propylene with catalysts like aluminum alkyl and titanium tetrachloride leads to the formation of Polypropylene(PP).

Polypropylene is low density thermoplastic and enjoys a high melting point of 160 degrees Celsius and above.It has a operating temperature of 125 degree Celsius. PP has high resistance to chemicals and solubles with a very low water absorption rate of .03 percent which makes it highly desirable in acid and chemical industries. PP is flexible and soft and Will not crack when subjected to Environmental Stress cracking. We at INDANA use a very high quality raw material which gives our guards very high uv resistance & extended life.< br>

UV Resistant PP has a low dielectric constant which means it is a poor conductor of electricity. Polypropylene is a versatile thermoplastic which is being used in manufacturing of containers to carpets. For this reason, as a flange guard manufacturer, we use PP for pipe fittings & Flange Guards.

Resistant Polypropylene flange guardsare used to prevent acid sprays or chemical splash. These acidspray shieldsare used on Flange joints & Pipe Jints in chemical and aqueous piping system. The maximum operating temperature is 125 degree celcius. ThoughPP Flange Guards& safety shields is being manufactured by many manufacturers what makes Indana PP Flange Guards different is our focus on UV resistant material, quality and customer centric price.

All PP Flange guards come with a two year replacement warranty and are completely chemical resistant and uv stabilised.PP Flange guards are belt type shields and takes less than a minute to secure your Flange joints. No special hardware or tool is required to install these splash shields.PP Flange Guardsare fitted with the innovative multigrip extensions & smart pressure diffuser. These hold the Flange Guard securely on the flange & diffuses the pressure of the splash.These guards are available in various sizes, both standard & custom sizes.

Flanges & Pipe joints don't need to be opened up. The PP Pipe Spray Shields can Be secured easily. Refer to the demo video to understand the locking mechanism. These chemical splash shields will prevent spillage and ensure industrial safety of your manpower and equipment at all times. Manufacturers test certificate is provided so that a a customer can always check the authenticity of the material. Every fastener that comes with the safety flange guard is checked thoroughly for tightening.

These are primarily flexible flange guards or Flange shields. Another variant available in Polypropylene isPP Box Type Flange Guards.

At INDANA, Your safety is our priority. Lastly the product pricing is very reasonable and cheapest in the Indian market. We believe in giving our Customers a better product at even better prices. Indana Flange Guards are uncompromising on quality.

info@indanasteel.com

PP Flange Guards
Description:UV Resistant PP Flange Guards By Indana are thicker than the rest. Also the UV Resistance is very high
Written by:Mr. Vipul ShahRating:5 out of 5