INDANA STEEL PVT.LTD

Khar, Mumbai, Maharashtra

PVC Spray Protection and Tie Cords are self-extinguishing, nonflammable, and non-combustible. As an organisation we believe in safety for all and these shields are part of our range of affordable flange safety shields. These shields come in a standard Guarantee of 18 months.

What Makes A Ships Piping System Difficult Is Small Confined Spaces. It Gets Very Hard To Operate In Case Of A Leak Because Of Inadequate Spaces And Limited Head Or Body Room Availability. A Ship Shield Will Diffuse The Pressure Of The Dangerous Fluid Or Gas Released. It Will Keep The Operator Safe And Prevent The Liquid From Spilling Onto Your Electrical Boxes And Other Piping Assemblies Which Might Lead To Fire Or Accidents.

A vessel piping system consists of lines which move around pumps, deck and tanks. These pipe lines carry and discharge fluids as per process requirement. Pipelines running from pump to the tanks are known as bottom pipe lines, from the deck to the tanks are called drop lines, Pumps to the deck are called riser pipelines and piping on the deck is called deck pipe lines. These Shipping vessels have Valves installed for pressure regulation which are subject to a very high surge pressure during opening and closing. Theses valves operate on a controlled speed as any adventure may lead to a high pressure leak.

Flame Retardant Material Is Used In The Construction Of TheseSafety Ship Spray ShieldsKeeping In Mind Absolute Safety Of The Manpower At All Times.Aluminium And Silicon Insert Prevents Mist Formation And Resists Chemicals While Retaining The Flame Retardant Properties.Silicone Adds Thermal And Electrical Insulation To The Navy Shield.

Our Navy Shields Are Being Used By Luxury Cruise Ships Such As MV Celebrity Constellation, MV Celebrity Millennium And Many Others.

International Maritime Treaty Which Ensures Ships Maintain A Minimum Safety Standard.INTERNATIONAL MARITIME ORGANIZATION:Regulatory Body Which Ensures That Best Safety Practises Are Followed By Ships And Enviromental Performance.

Similar to the Valves of the heart, In a piping system also Valves regulates, controls, isolates and directs the flow of the fluid. Valves alone account for almost 10 percent of the cost of total piping system. In ancient times tree branches were used to regulate water. The Roman Empire was unmatchable in early days in controlling and storage of fresh waters. In fact, the castellum was the first water Sewerage system in the historic city of Pompeii.The distribution and regulation of water from the aqueduct through 3 outlets was done by the castellum. Egg shaped Lead Pipe was used in the transportation of water.Unfortunately, theancient city of Pompeii was buried under the volcanic eruption of Mount Vesuvius in 79 AD. The excavations have led to the finding of bronze valves which were used to pump water uphill to the castellum.

In a Modern piping system Valves alone account for almost 10 percent of the cost of total piping system. Few types of Commonly used Industrial Valves:

• Ball Valves-Have spherical closure unit which allows flow of fluid when the bore is positioned in the direction of pipeline and closes when bore is perpendicular to the pipeline.
• Globe Valves- Are use primarily to stop, regulate or throttle the pressure of a fluid. They are linear motion valves and are commonly found in Ships.
• Gate Valves- Are designed to be fully opened or fully closed. They are not used for regulating pressure of a fluid. Commonly used in water and sewage systems.
• Butterfly Valves-The Quarter turn rotational motion valves. The Quarter turn provides complete closure or opening of the Valve.
• Check Valves- Mostly used in the Steam piping systems these valves allow the fluid to pass in one direction and blocking it in the reverse direction.

Most of the Valves leak and spray outs with time and is very common to the industrial setting. Primary reasons being:

1. Cannot be closed due to foreign particles, dust and debris.

2. Seat or the seal of the Valve gets damaged with time.

3. Maintenance failure.

These leakages have been d fined by various standards like API, ANSI, MSS, FCI etc.

Many of the catastrophic accidents in the past have been due to Valve leakages and subsequent splash. Industrial Valves Are regulating devices which at any given time are holding high pressure fluids. Primarily because of two reasons valve leaks are more dangerous compared to Flange leaks:1. Imagine a close valve leaking which is holding a high-pressure fluid whereas In most cases flange are subject to fluid movement.

2. Valves have been designed to operate so the worker interference is not limited whereas flanges have limited interference mostly during maintenance.

These reasons makes a Valve Spray out very dangerous. We have specially designed Valve Spray shields to contain these leaks and keep your manpower safe at all times. Installation of Valve Spray Shields and valve guards also increases you workers morale while handling these equipment. Valves shields come in three types of material commonly:

1. Tefloncoated fibreglass Spray shields with dual locking2. TeflonCoated Fibreglass Spray shields with visual inspection window and dual locking (Clear Type)3. Stainless steel Grade 316 shields for high temperature and highly corrosive environment.

Every Valve spray shield is tested for appropriate pressure requirement at our pressure testing rig. These Valve shields are specially stitched with Kevlar threads giving it very high strength. Cotton or nylon stitched valve guards may come out during a leak as these threads are not designed to handle such kind of environment and pressure. Material used in these Valve shields are flame resistant andTeflon/ Kevlar braided ropes give the valve shields its much-desired pressure holding strength. Every Indana Valve spray shield is a life saving and equipment saving device.