In Traders

Karve Nagar, Pune, Maharashtra

Description :Fabreeka crane rail pad is manufactured in two types to accommodate either light or moderate to heavy crane service duty. Both types of crane rail pad have been designed to provide a significant reduction in beam and rail stress while improving wheel load distribution to reduce rail maintenance. The unique LTP surface allows the rail to contract and expand, improving the lateral rigidity and wear resistance of the pad under high service loads.
Key Features / Benefits :

• Fabreeka crane rail pad can withstand wheel loads up to 12, 000 psi
• LTP surface allows for rail expansion and reduces wear
• Laminated, fabric reinforcement provides lateral rigidity and high load capacity
• Reduces noise and structure-borne vibration

Description :Fabreeka-PTFE bearing pad is comprised of the original fabric reinforced, elastomeric pad developed in 1936. Fabreeka-PTFE pad is used to accommodate construction irregularities such as rotation and non-parallel load bearing surfaces, while also providing a sliding surface to accommodate expansion. The Fabreeka-PTFE bearing pads are manufactured with a Teflonsurface for use in expansion bearings and pipe slides. Fabreeka pad is scientifically constructed to give years of service under the most severe operating conditions. Fabreeka-PTFE pad can be used in structural expansion bearings, slide bearings, pipe clamps and as pipe support pads.

Key Features and Benefits of PTFE Bearing Pads :

• Pads can withstand compressive loads perpendicular to the plane of laminations of not less than 12, 000 psi before breakdown.
• Low coefficient of friction via PTFE surface.

Features :

Description:

Metered Oil Control Gun with Rigid extension, locking trigger and non-drip nozzle. Flow rate up to 30 l/min through 1/2" BSP(F) swivel inlet. Maximum working pressure up to 10, 350kPa (1, 500 psi) through either of two outlets. Mechanical display has both push-button reset and non-resettable totals with accuracy of +/- 1.0%

Technical Specifications:

• HG SERIES oil gun with mechanical display, featuring both totaliser and press-button reset batch counters
• Accuracy of +/- 1% (lube oils)
• 4-digit resettable batch totaliser
• 6-digit accumulative totaliser

Features :

Flap Wheels
For fine grinding radii, removing significant undulations and achieving fine surfaces in containers, kitchen and other metal products. High Flexibility with good performance and durability. Wide range of dimensions and grit sizes available.

Non-Woven Fiber Brushes
For a soft finishing with a fine, high-quality surface. Perfect for working on stainless steel.Ideal for producing matt surfaces, depending on grain: line finishing, silk finishing and satin finishing.

Tungsten Carbide Burrs
The Suhner tungsten carbide burr programme can cover nearly every requirement with approx. 200 shapes/cutting combinations. 7 precision ground cuts guarantee a real application solution-for every raw material.

Flexible Shafts
Suitable for connection to all Suhner flexible shaft machines. Power transmission element for straight and angle tool holders, belt grinders and angle machines. Due to the separation of power unit and tool you can work fatigue-proof even in long-term usage.

Suhner offers a large range of pneumatic straight grinders for almost every application.

with a turbine system, are offered. The professional worker will want for nothing whilst working with Suhner machines and Abrasives.

With Suhner LPC 2 TOP we have a powerful, low-speed angle polisher in our range which is perfect for applications in body and paint shops. LPC 2 TOP can be used with or without oil mist.

Orbital Sander Machine

The Suhner LOB 10is the universal orbital sander for all matt grinding work. Dust extraction as well as different options for the support plate are part of the standard programme. Low vibration and easy handling are further advantages of the Suhner LOB 10.

Powerful, ergonomic angle machines for grinding and finishing drums A 115x100mm width Can also be used as slow angle polishersstabilised Speed control. Fields of application: Cleaning, grinding and polishing.

Anyone who wants to lift or lower loads with control and without excessive strength relies on the industrial gas push type springs from ACE. These maintenance free, ready-to-install machine elements, which are available from stock, support sheer muscle power and reliably open and hold.

Available with body diameters of 8 to 70 mm and forces from 10 to 13, 000 N, ACE gas push type springs are characterised by a huge variety and maximum service life. The first is achieved thanks to the number of available connections and fittings for simple attachment and the latter with high quality design and materials. Whether they are made of steel or stainless steel, these components make any work easier and also make a particularly good impression visually in every branch.

Rotary DampersSmall dampers refi ne end product

ACE rotary dampers mainly provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or linear movements.
They are often necessary to make careful opening and closing of small lids, compartments and drawers possible and they protect sensitive components while increasing the quality and value of products. They are easy to integrate. The harmoniously gentle movements of these little decelerators can be achieved with continual rotation or with limited pivoting angles. They slow down left, right or double sided rotation. Suitable for almost any application and currently also available in adjustable variations, they provide braking torques of 0.05 Ncm to 40 Nm.

Leveraging on our quality oriented professionals, we are offering Flexible Drive Coupling to our clients. Offered range plays an important role in isolation of torsion vibration and is offered in different dimensions to our clients. Our entire assortment is checked for its uniqueness and quality and we are offering this at market leading price.

Banking on our enriched industry experience, we are engaged in offering a huge gamut of precision sine vice. This high grade precision sine vice is designed and fabricated using high grade metals that are procured from reliable vendors of the market. Our wide range of precision sine vice is fabricated under strict supervision of quality controllers to offer the best quality products.

We, Tradelink Services, offer Metal Bellow Couplings which are primarily used to transmit power between 2 shafts, without backlash. In addition, they also offer high flexibility, the capability to work at high speeds and compensation for radial, axial and angular misalignments. Couplings with different torsional stiffness are also offered, as a standard.

Ideal for holding taps, reamers, Screw extractors. Regular T handle type have self centering steel jaws.Ratchet type can be set left, right. or Neutral.

We are the leading organizations engaged in offering to our clients excellent quality Retractable Badge Reel.Our company provides a number of plastic card accessories which includes Retractable Badge Reel (Yoyo). These reels are made of finest raw material with superior quality. These retractable badge reels are easy to handle, convenient and highly durable. Our products are widely appreciated and demanded by our esteemed customers due to our attractive designs and quality products.

Pneumatic Polisher designed for continuous production use. It has a centrally water-fed distribution system that provides the best finishes possible. We offer a complete range of sanders and polishers to suit your finishing surface applications from heavy material removal to fine finishing.

Enriched with vast vendor-base, we are engaged in supplying, exporting, distributing, trading and importing Drill Vise. Our vendors manufacture these products utilizing quality-assured raw material and other basic components. Further, to attain maximum client satisfaction and for the same, we offer these products to our customers at industry leading prices.

Facilitated with state-of-the-art infrastructure facility, we have been able to manufacture, supply and export a commendable range of Hydraulic Mounts. Available in different models with varied bearing capacities, these mounts are suitable for different loads, owing to which demanded across the market. Applicable in milling, grinding, wood working, power machines and hydraulic presses, these mounts are available at industry leading prices.