Write a Review
Our Product / Services
Rubber & Rubber Products
2 Products availableHDPE Pipe
2 Products availableWall & Floor Tiles
1 Products availablePipe Bends
1 Products availableCoating Services
1 Services availableMetal Finishing & Coating Services
1 Products availableElevators
1 Products availableFilters
1 Products availableClamps And Clamping Equipment
1 Products availableWe offer the best product range of cast basalt and Ceramic Lined Product.
Cast Basalt is produced by melting of naturally available basalt rock and cast into tiles and cylinder. The casting is so produced is then subjected to heat treatment cycle to produce Re - crystallized basalt the resultant product is called as fused cast basalt which has excellent wear resistant properties against sliding and friction induced abrasion and also inherits the inertness of parent material.
Cast baslt Lined Pipe can be mainly used as Abrasive material and ash handling Sytem like chute slip trough, funnel, silos, a variety dust catcher, revolving-flow machine, various scraper transport planes, all the feeder liner.Laying the ground all types of chemical plants, it can be for lining picking tank or storage of corrosive substance of the storage room.
According to customer requirements along with cast basalt production technology and we can offer various specifications and various shape to meet clients need.
Friction Resistance :As more material is passed over Cast Basalt it gets polished up thereby reducing friction further. Cast Basalt improves in service after getting polished. Wetting also improves its performance in practical applications.
Impact Resistance :Direct Impact Resistance at 90 degree is low like all other ceramics, but it can be increased with proper installation by reducing the angle of impact. Cast Basalt is the best wherever sliding abrasion exists. Moreover, external impact strength of composite basalt pipe (enclosed in M.S. Shell) is always more than that of bare Ni-hard Pipe.
Chemical Resistance :Cast Basalt is almost absolutely acid/alkali resistant (except Hydrofluoric Acid) and hence corrosion resistant.
Weight and Sizes :Basalt Tiles are available in regular shape square of 200 x 200 x 30 mm thick, weighing approx. 90 kg/sq m; whereas bends and pipes are lined using Basalt Cylinders of various standard sizes from 50NB upto 500NB.
Temperature :Cast Basalt withstands temperature up to 4500 C
| Sr. No. | Particulars | Specifications |
|---|---|---|
| 1. | Item | Cast Basalt |
| 2. | Chemical Resistance | Absolutely acid/alkali resistant (except Hydrofluoric Acid)and Hence corrosion resistant |
| 3. | SPECIFICATIONS OF CAST BASALT | |
| a. | Cast Basalt Thickness | 20 +- 2 mm thk |
| b. | Max. Operating temprature | 350 Deg. C |
| c. | Bulk Density | 2.9 to 3.1 gm/cc |
| d. | Water Absorption | Max. 0.5% |
| e. | Hardness to Mohs | 8 |
| f. | Compressive Strength | 500 - 550 Mpa |
| g. | Flexural Strength | 40-50 Mpa |
| h. | Coefficient of expansion | 6-8 * 10 -6 1/K |
| i. | Grout Thickness | Min. 15-20 mm |
Ceramics is produced from high Purity fine grain Aluminum oxide. The necessary forming of shapes is done in its green or pre sintered phase. The products are then sintered in a Klein at extremely high temperature.
Improve Engineering manufactures a wide range of high alumina ceramic liners such as tiles, special shapes and pipe sections which have high alumina content and wear protection properties. These liners are bonded on to steel surfaces and are extremely effective for prevention of wear and tear due to high particle velocity, impingement, abrasion and impact. They are extensively used for lining of equipment prone to severe wear in core sector industries such as cement, steel, power.
Improve Engineering manufactures ceramic tiles in the form of weldable and pastable tiles as well as pipe sections of various diameters for installation at site and more specifically for lining of fabricated pipes, bends and fittings for pneumatic conveying applications specially for conveying of pulverised coal in thermal power plants .
Alumina powder after ball milling and spray drying are pressed and sintered at high temperature. This sintered product consists of dense alumina with hardness of approximately 9 Mohs and can withstand temperature up to 10000C.
Our range of Industrial Rubber Linings On Tanks is widely used in tanks, vessels, etc due to its superior quality. Using advanced technology, we manufacture these rubber linings Tanks in varying thickness. We can also custom manufacture our range of industrial rubber linings tanks according to the specific requirements of the clients. Following are the unique features of our range.
FeaturesSuperior quality protects against corrosion and metal impurities Rubber lining Tanks.Corrosion and abrasion resistant Rubber Lining Tanks.Ability to withstand tough chemical environments Rubber Lining Tanks.
Bends and Rubber Lining :The use of bends in a designed piping system is critical to managing wear in piping directional changes.
In short the longer you can make the directional transition, the less wear you will ultimately have in your elbow. Induction bent elbows provide engineers and designers an infinite degree of adjustment and allows the elbow to have any sweep dia, limited only by the sweeping arm of the induction bending machine.
Although there are very little limitation of what can be fabricated as an elbow, lining these elbows with rubber can be a challenge.
Here are some general rules of thumb :
Acid resistant tiles used as flooring, lining in many kinds of chemical reactors and tanks of acids and other chemicals in chemical factories, fertilizer factories, Sulphuric acid factories and iron and steel plants.
These bricks are prime and most effective material for almost all anti corrosive method. We provide these bricks and tiles in various thicknesses and can supply any emergency requirement.
We are prominent manufacturer and supplier of a vast range of Acid Proof Bricks of excellent quality. As the name suggests, these types of bricks are non-reactive to various acids and other chemicals and are extremely demanded for various applications. These acid proof bricks are available in varied shapes and dimensions at cost effective prices. We also custom make these bricks to suit client requirements.
Precision Coatings, Inc. offers several CARBIDE coatings applied by Plasma Spray.
Carbide coatings are typically used for wear resistance to abrasion, erosion, galling, and fretting. Most "carbide" coatings are applied by spray gun to achieve the densest and most well-bonded coatings available by thermal spray. Plasma sprayed carbide coatings may be selected to achieve a higher texture "as sprayed". Some applications warrant flame spray applied coatings and a secondary fusing operation to provide a metallurgic ally bonded coating. There are several different chemistry of carbide coatings including:
The Bag filter consists of filter cartridges (bags), enclosed in a metal housing in which fresh air enters the bag filter housing through hopper inlet, deliver-ing the powder to the hopper through suction or pressure, which then gets collected in the air bag and the clean air passes through bags into the atmosphere.
Our bag filtration systems are available with follow-ing specifications which include MS or SS construc-tion type, capacity ranging from1000M3/Hr to 250, 000 M3/Hrand other types of specifications
For Handling fine or lumpy material.Chains and sprockets specially selected to provide trouble free service.Flat link chain or round link chains can be used.Designed and manufactured to provide proper access for inspection and repairs.
Pipe materials for pipe spools shall conform to one of the material specifications described below in accordance with the customer's piping specifications :
Mild Steel Pipes as per IS 1239 Medium/ Heavy duty upto 150 NB & above 150 NB as per IS 3589, 5.00 MM Thick KS D3507 SPP or D3562 SPPS, ERW pipeCarbon steel pipe, ASTM 53 Gr.B or ASTM A106 Gr.B ERW and seamless pipe, size from 1 to 16
Other required pipe materials such as API pipe, stainless steel or alloy steel pipes would be available to meet service conditions and should be referred to us.
Flanges confirming to ANSI / BS10 / DIN or any other international standard will be supplied in Mild steel, Carbon steel, Stainless Steel.Standard flanges are Slip-on type and Lap-joint type flanges and will be provided if requested at the time of making an offer.
The polymer resin shall meet the STM Standard Specifications and our standard PP liners are unpigmented and natural white color. The colored liners are available if specially requested.
We are considered in the market to be one of the leading manufacturers and suppliers of this highly commendable range of Chemically Bonded Ceramics. Manufactured using the finest ceramic and modern machines, its quality never deteriorates. In addition to this, the offered product is known to have a superior sturdiness, durability and a commendable resistance to leakage.
It comes under into Chemical Earthing Electrode
Features :
We are widely reckoned as one of the noteworthy names of the industry by offering superb quality gamut of Welded Pipes. The offered products are manufactured by using highest quality raw materials that are sourced from the official vendors of the market. Designed as per the industrial standards, these tubes are available in diverse specifications. Moreover, our valued clients can avail these tubes from us.
PP Welded PipesWe are an esteemed organization engaged in providing an extensive range of quality PP Welded Pipes with high quality materials with assurance of high reliability, stability, strength and long lasting features which we have in extensive demand in the market. We are well known in the market for our quality products in affordable prices and on time deliveries.
Improve Engineering Systems (Improve Engineering Systems)
shop no 5, Solanki Heights, Hadco Road Saswad, Tal- Purandar, Dist- . 412301, Pune, Maharashtra, India
Share us via
View Contact Number 
