• Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
• These are shipped in half assembled condition for economical in freight and storage costs.
• Supplied with hinge pin
• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request

These plugs are run and set on Tubing or Drill Pipe. It also incorporates the seal element lock to allow faster, safer run-in.

Available in the size range 4 to 20, this device can be set in both upset and Non-Upset casing to provide maximum clearance during rotation. It has a groove in the middle into which a spiral nail can be driven for improved grip on the casing. The broader band firmly grips the collar into position around the casing

• Sizes range from 4 1/2 to 20. In addition to the regular sizes, any special sizes and combinations can be made available upon request.
• Imperos Hinged Non-Welded Semi Rigid Bow Spring Centralizer is engineered to meet API 10 D standards and specifications, allowing them to withstand all conditions.
• This Centralizer is ideally suited for use in Deviated and Horizontal Wells where the load on the spring is maximum, as it has a high restoring force and high standoff with low running force.
• Bow springs are made from high-quality alloy steel and heat-treated.
• The spring characteristics of the Double-Crested profile make it easy to move through tight spots and doglegs.
• As part of the manufacturing process, the centralizer is coated with iron phosphate to prevent corrosion.
• This Centralizer is shipped in two halves to ensure a compact shipping package.

• Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.
• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request.
• Slip On Welded Semi-Rigid Centralizers share many of the same design and operational features as Hinged Welded Centralizers. They can be directly installed onto pipe and works best with set screw style stop collars to increase the holding force. The collars are innovatively designed with roll formed peripheral ridges that provide extra rigidity.

• Used in vertical, deviated and horizontal wells
• Flexible and High restoring force
• Developed to have good stand-off
• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request.

These stinger subs are designed to positively lock the stinger sub into the retainer while allowing valve actuation with up and down motion. The Stinger Subs will not lock the retainer valve into the open position. Hydraulic effects must be considered to ensure the valve will remain open during pumping operations.

CONVENTIONAL TOP & BOTTOM PLUG

• Plugs are available in Nitrile, Viton, Aflas and other elastomers.
• Plugs are available in conventional and Non-Rotating Design. Plugs are PDC drillable
• Maximum temperature rating 400F
• Non-Rotating profile reduces the drilling time
• Oil Resistant

• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request
• Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.

• Can be made available in Left, Right and Straight Vane
• Reduce friction between the casing and the hole, allowing the casing to be inserted more easily into the wellbore
• Help centralize casing in the hole, allowing an even distribution of cement around the casing during cementing operations.
• Improve cement bonding to the casing
• Prevent the casing string from becoming differentially stuck
• Break up gel pockets in the wellbore while casing is being run, improving
• drilling-fluid displacement during cementing
• Increase fluid turbulence removing filter cake on the wellbore face

• Can be set by hydraulic setting tool / wireline set.
• Bidirectional Slip.
• Three element sealing system to provide superior pressure containment.
• Built in differential pressure.
• Equalizing system.
• WR will not release unless equalizing sleeve has been shifted.
• Ability to hang pressure recorders.

• Locked to cement retainer or bridge plug to avoid premature setting or loss.
• Can quickly be configured to set cement retainers or bridge plugs.
• Allows single run for squeeze cementing.

• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request
• Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
• These are shipped in half assembled condition for economical in freight and storage costs.
• Supplied with hinge pin

• Fast Drill Out.
• Non-Rotating Profile Available
• Available in Side-Jet, Down-Jet, Up-Jet Port
• Stab In profile available in large size
• Internal Parts are PDC drillable.
• Float Shoe is available in all API grade material.
• Float shoe can be furnished in API threads as well as in Premium threads.
• Jet Port/Nose configuration is available upon request, Impero offers Side Jet Ports, Down Jet Ports and Up Jet Ports.
• Valve is tested as per API RP 10F Category III C. Float Shoe is available in Single and Double valve Configuration.Maximum Back Pressure rating: 5000 psi @400F.
• Tubing Float Shoe for high pressure up to 10000 PSI.Float Shoe is available in different type of nose as per the application.
• Chip breaker features are in all type of aluminum nose as well as Phenolic nose.

• Can be run and set in tandem with retrievable production packers or squeeze packers.

• Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
• These are shipped in half assembled condition for economical in freight and storage costs.
• Supplied with hinge pin
• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request

These plugs are run and set on Tubing or Drill Pipe. It also incorporates the seal element lock to allow faster, safer run-in.

Available in the size range 4 to 20, this device can be set in both upset and Non-Upset casing to provide maximum clearance during rotation. It has a groove in the middle into which a spiral nail can be driven for improved grip on the casing. The broader band firmly grips the collar into position around the casing

• Sizes range from 4 1/2 to 20. In addition to the regular sizes, any special sizes and combinations can be made available upon request.
• Imperos Hinged Non-Welded Semi Rigid Bow Spring Centralizer is engineered to meet API 10 D standards and specifications, allowing them to withstand all conditions.
• This Centralizer is ideally suited for use in Deviated and Horizontal Wells where the load on the spring is maximum, as it has a high restoring force and high standoff with low running force.
• Bow springs are made from high-quality alloy steel and heat-treated.
• The spring characteristics of the Double-Crested profile make it easy to move through tight spots and doglegs.
• As part of the manufacturing process, the centralizer is coated with iron phosphate to prevent corrosion.
• This Centralizer is shipped in two halves to ensure a compact shipping package.

• Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.
• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request.
• Slip On Welded Semi-Rigid Centralizers share many of the same design and operational features as Hinged Welded Centralizers. They can be directly installed onto pipe and works best with set screw style stop collars to increase the holding force. The collars are innovatively designed with roll formed peripheral ridges that provide extra rigidity.

• Used in vertical, deviated and horizontal wells
• Flexible and High restoring force
• Developed to have good stand-off
• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request.

These stinger subs are designed to positively lock the stinger sub into the retainer while allowing valve actuation with up and down motion. The Stinger Subs will not lock the retainer valve into the open position. Hydraulic effects must be considered to ensure the valve will remain open during pumping operations.

CONVENTIONAL TOP & BOTTOM PLUG

• Plugs are available in Nitrile, Viton, Aflas and other elastomers.
• Plugs are available in conventional and Non-Rotating Design. Plugs are PDC drillable
• Maximum temperature rating 400F
• Non-Rotating profile reduces the drilling time
• Oil Resistant

• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request
• Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.

• Can be made available in Left, Right and Straight Vane
• Reduce friction between the casing and the hole, allowing the casing to be inserted more easily into the wellbore
• Help centralize casing in the hole, allowing an even distribution of cement around the casing during cementing operations.
• Improve cement bonding to the casing
• Prevent the casing string from becoming differentially stuck
• Break up gel pockets in the wellbore while casing is being run, improving
• drilling-fluid displacement during cementing
• Increase fluid turbulence removing filter cake on the wellbore face

• Can be set by hydraulic setting tool / wireline set.
• Bidirectional Slip.
• Three element sealing system to provide superior pressure containment.
• Built in differential pressure.
• Equalizing system.
• WR will not release unless equalizing sleeve has been shifted.
• Ability to hang pressure recorders.

• Locked to cement retainer or bridge plug to avoid premature setting or loss.
• Can quickly be configured to set cement retainers or bridge plugs.
• Allows single run for squeeze cementing.

• Available in 4-1/2 to 20 sizes. Any special sizes or combination can be made available on request
• Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
• These are shipped in half assembled condition for economical in freight and storage costs.
• Supplied with hinge pin

• Fast Drill Out.
• Non-Rotating Profile Available
• Available in Side-Jet, Down-Jet, Up-Jet Port
• Stab In profile available in large size
• Internal Parts are PDC drillable.
• Float Shoe is available in all API grade material.
• Float shoe can be furnished in API threads as well as in Premium threads.
• Jet Port/Nose configuration is available upon request, Impero offers Side Jet Ports, Down Jet Ports and Up Jet Ports.
• Valve is tested as per API RP 10F Category III C. Float Shoe is available in Single and Double valve Configuration.Maximum Back Pressure rating: 5000 psi @400F.
• Tubing Float Shoe for high pressure up to 10000 PSI.Float Shoe is available in different type of nose as per the application.
• Chip breaker features are in all type of aluminum nose as well as Phenolic nose.

• Can be run and set in tandem with retrievable production packers or squeeze packers.