My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Industrial Chemicals 4 Products available
  2. Pesticides & Insecticides 3 Products available
  3. Dispersant Additives

    1 Products available
  4. Plastic & Powder Coatings

    1 Products available
  5. Sand

    1 Products available
  6. Corrosion And Rust Control Products

    1 Products available
  7. Others Products 2 Products available

Our Products

Our product range contains a wide range of Group Companies, Export Market and potassium meta bisulphite

Biocide (ibc - 101)

We are offering Biocide (ibc - 101). Product Use: It is a bactericide for control of mixed bacteria in both aerobic and anaerobic (including sulphate reducers) in fresh water, sea water and low brines.Description It is a quaternary ammonium compound based bactericide. The surfactant included increases the effectiveness for a broad sustained action with good penetrating qualities. Application It can be used in batch or continuous treatment. The most economical methods of treatment is batching for three to six hours once or twice a week at 50-200 PMM depending on the severity of the problem. Handling It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be avoided with copious amount of water. On Ingestion/Eye contact with the product, medical attention should be sought immediately. Physical DataAppearance Pale Yellow LiquidSpecific Gravity 0.98 0.02 at 250C Viscosity < 80 CPS at 250C pH Range 8.0-9.0 Solubility Soluble in Water & Insoluble in Aromatic solvents like Toluene, Benzene, Methanol & Iso Propyl Carboys/Barrels Availability : 50/200 Kg. Net in New HDPE Carboys/Barrels.
View Complete Details

Biocide (ibc - 103)

We are offering Biocide (ibc - 103). Product Use: It is a highly effective microbiocide for control of both anaerobic and aerobic bacteria in fresh water, sea water, or brines.Description It is a highly effective potent blend of aldehyde bases found to be particularly effective in the on shore / off shore application. The synergistic action insures rapid and complete bacterial kill with decreased likelihood that the bacteria develop a tolerance for the chemical. The ingredients in it are biodegradable, making the product useable in systems where treated water is to be discharged into the sea. In addition, it does not contribute to foaming, making it highly suitable for sterilization of separators, water injection systems, drilling fluids, gas storage applications, and others. It is compatible with most scale inhibitors.Application It has an excellent / performance ratio, and may be used either in batch or by continuous injection. Batch treatments of 50 200 PPM it is injected for 3 6 hours, as needed or as regular maintenance treatments, give economical control of bacteria.Handling It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On ingestion / eye contact with the product, medical attention should be sought immediately. Physical DataAppearance Clear or pale yellowSpecific Gravity 0.98 0.02 at 250C Viscosity < 80 CPS at 250C pH Range 4.0 - 6.0 Solubility Soluble in water and insoluble in aromatic solvents like Toluene, Benzene, Methanol and Iso Propyl Alcohol. Availability : 50 / 200 Kg. Net in New HDPE Carboys / Barrels.

Appearance Clear or pale yellow
Specific Gravity 0.98 plusmn; 0.02 at 250C
Viscosity < 80 CPS at 250C
pH Range 4.0 - 6.0
Solubility Soluble in water and insoluble in aromatic solvents like Toluene, Benzene, Methanol and Iso Propyl Alcohol.
View Complete Details

Biocide (ibc - 102)

We are offering Biocide (ibc - 102). Product Use It is a highly effective biocide for control of both aerobic and anaerobic bacteria in fresh water, sea water and low brines.Description It is a Morpholine based Biocide found to be particularly effective in the on shore / off shore application. The synergistic action insures rapid and complete bacterial kill with decreased likelihood that the bacteria develop a tolerance for the chemical. The ingredients in the BIOC 909 are biodegradable.Application It has an excellent / performance ratio, and may be used either in batch of by continuous injection. Batch treatments of 50 - 200 PPM. It injected for 3 - 6 hours, as needed or as regular maintenance treatments, give economical control of bacteria. Handling It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On ingestion / eye contact with the product, medical attention should be sought immediately. Physical DataAppearance Brown Colour LiquidSpecific Gravity 0.98 0.02 at 250C Viscosity < 80 CPS at 250C pH Range 8.0-9.0 Solubility Soluble in water and insoluble in aromatic solvents like Toluene, Benzene, Methanol and Iso Propyl Alcohol.
View Complete Details

Paraffin Dispersants

We are engaged in offering highly efficacious Paraffin Dispersants that are used in Oil and Gas Industry. Consequently, we are identified as one of the most renowned Liquid Paraffin Dispersants Exporters and Suppliers in the country. Our Water Soluble Paraffin Dispersants act against the accumulation of solids and paraffin in tubing, treaters, stock tanks, flow lines, etc.

Paraffin Dispersant (IPD-3320)

Product UseA continuous feed of IPD-3320 to prevent deposition of paraffin and other solids in tubing, flowlines, treaters, and stock tanks should be injected at a point which insures efficient mixing of the chemical in the produced fluids.
DescriptionIPD-3320 is a unique blend of organic surface-active compounds combined with multiple aromatic solvents that are designed to eliminate depositions of paraffin. IPD-3320 is particularly effective in removing accumulated paraffin deposits across the vast spectrum of waxes and since it is also a dispersant, it serves to retain the paraffin in the oil phase. The solvents in IPD-3320 facilitate the dispersion of the paraffinic crystals. IPD-3320 is typically utilized in any surface equipment where accumulations of paraffin occur as well as in flow lines and down hole. It can also be used for tank bottom cleanup, back washing filters, and to promote cleanup during well work over operations.
Application : Enhanced Oil RecoveryIPD-3320 is generally applied batch-wise by pumping IPD-3320 as the leader followed by a flush of oil or water down the annulus, or in the case of gas lift wells, pumping down the tubing. 15 gallons of IPD-3320 per foot of perforation is the recommended ratio for the treatment.
HandlingIt can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be avoided with copious amount of water. On Ingestion/Eye contact with the product, medical attention should be sought immediately.

Physical Data

AppearanceBrown Liquid
Flash Point700F
Density LBS/GAL7.7
Pour Point< -500F
View Complete Details

Polyelectrolyte

We are considered as one of the chief Liquid Polyelectrolyte Manufacturers, based in India. Our Organic Polyelectrolyte is a polymer that is highly efficient to eliminate oil and solids from the water. The Polyelectrolyte, available with us, is high on demand in Indian as well as international market. Moreover, we offer this at Industrys best price.

Polyelectrolyte/ Deoiler (DE - 161)

Product UseDE 161 is a liquid organic cationic polymer used to remove oil and suspended solids from water. It can be used alone or together with coagulants and flocculants such as iron salts, etc.
DescriptionDE 161 is a cationic polyacrylamide based compound.
ApplicationDE 161 is suitable for use in air flotation separation, gravity settling and direct filtration. When used in conjunction with standard flocculants, it produces an excellent flock in treatment range 5 â?? 20 PPM. Proper dosage rates have to be determined for each water. DE 161 may be pre-diluted with water or injected as supplied.
HandlingDE 161 can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Use of safety goggles and gloves are recommended for safe handling. The spillage can be washed with copious amount of water. On ingestion / eye contact with the product, medical attention should be sought immediately.

Physical Data

AppearanceViscous clear liquid
Specific Gravity 0.98 ± 0.05 at 250C
Color Pale yellow
Viscosity< 100 CPS at 250C
pH Range 5.5 - 7.5
Boiling Point > 100 0 C
Flash Point > 100 0 C
Freezing Point< -10 0 C
Solubility Soluble in water in all proportions and insoluble in Aromatic Hydrocarbon Solvents.
Availability : 50 / 100 / 200 Kg. Net in New HDPE Carboys / Barrels.
View Complete Details

Proppant Sand

We are identified as one of the most reputed Oil Proppant Manufacturers and Suppliers in the Indian as well as international market. The Oil Fracturing Proppant, available with us, is efficacious to increase the productivity of natural oil and gas. Moreover, we offer high quality Proppant Sand at the most discounted prices.Proppant Sand (IPS-1220) Name Oil Proppant, Oil fracturing Proppant, Oil hydraulic Proppant, Oil hydraulic fracturing Proppant.Use The proppant are used in the hydraulic fracturing process to increase the productivity of new and existing natural gas and oil well. Sieve Size 12/20Bulk Density (g/cm3)1.65-1.80Apparent Density(g/cm3)3.00-3.30Crush Resistance52Mpa / 7500 PSI69Mpa / 10000 PSI2025Roundness(1max)0.9Sphericity(1max)0.9Tubidity(NTU)

Proppant Sand (IPS-2040)

Sieve Size 20/40
Bulk Density(g/cm3)1.65-1.80
Apparent Density (g/cm3)3.00-3.30
Crush Resistance 52Mpa / 7500 PSI
69Mpa / 10000 PSI
5
9
Roundness(1max)0.9
Sphericity((1max)0.9
Tubidity(NTU)<100
Acid Solubility (12%HCL +3%HF)(%)<7
Packing50 Kgs, 1000 Kgs, 1500 Kgs50 Kgs, 1000 Kgs, 1500 Kgs


View Complete Details

Group Companies

Imperial Oilfield Chemicals Pvt. Ltd. (ICPL) is a subsidiary of Imperial Group of Companies, a multidisciplinary group having operations in various industry verticals and horizontals. The other subsidiaries of the group are :
  • Imperial Chem Incorporation
  • Bhavi Incorporation
View Complete Details

Export Market

ICPL strives to impart maximum satisfaction to the customers through high quality products, customer oriented services, competitive pricing and business regularity. Such efforts bring rich dividend for the company in terms of vast global patronage. The Company exports to Countries like Australia, Bangladesh, Pakistan, UK, Oman, UAE, US, Dubai, Egypt, Canada, Kuwait, Syria and other Middle East & GCC countries etc.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us