Our Products
The Octagonal Blender is an efficient and versatile blending machine for mixing and lubrication process of dry granules equally. It can be used for pharmaceutical, food, chemical and cosmetic products etc. Octagonal Blender consists of octagon shaped body, rectangular central portion and top and bottom polygonal frustum.
It is provided with baffles for fast and efficient mixing, charging port and outlet with butterfly valve. It is very useful machinery for pharmaceutical industry where in gentle blending of dry granules or powder is to be done. Other important feature of this machine is easy to clean in place. The bin charging system can also be incorporated in it which is a dust free closed system for charging and discharging of powders or granules. The powder consumption is comparatively lower than the other similar type of blender.
SPECIAL FEATURES OFOCTAGONAL BLENDERCoating process is complex and requires careful monitoring and control to ensure satisfactory results. The film coating process as such is a combination of four processes going on simultaneously :
Distribution of coating material on large number of tablets
Mixing of large batch for homogenous result
Drying or evaporation of solvent
Solvent vapour removal
By optimizing each process in relation to each other, Vats & Vessels Coating Pan gives the best results. Coating Pan is of Semi - Ellipsoidal shape with circular opening at the top. Pan is mounted at an inclination of 30 to 40 to the horizontal and it is driven with worm and worm wheel type gear box and electric motor. Machine is designed with M.S. / S. S. fabricated structure and all arrangements are inside the enclosure - except electric control air filter and S.S. Pan.
SALIENT FEATURES OFCOATING PANThe COLD STORAGE is double walled construction pre-fabricated with puff insulated sandwich panels with cam lock system with air tight for effective cooling system in the room. The interior and exterior are pre-coated G I sheets.
An exclusive door designed for the room with solid hinges and mantic catch system for locking system is provided. The panels can be dismantled, shifted and rearranged at any required place. The density of the PU foam is 40kgs/m3
Cooling
A hermetically sealed compressor provides temperature below ambient. The cooling unit is custom made with SS304 grade.
Control System
A Digital Electronic Controller is used for the operation in the Cold Storage.
Panel Board
Powder coated panel board with contactors / SSR Relays, amps setting relay safety fuses, MCBs, switches and indicators.
Surface Material
MMAC Autoclave Vertical is most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
Autoclave Vertical is ideal tool for Laboratories, Hospitals, Nursing Homes, R&D labs etc.
Pressure cut off Switch
Water Level cut off
Digital Timer
Microprocessor controller with printer Interface.
We introduce our self (IEC) as one of the manufactures and suppliers of Automatic Cashew peeling machinery with the processing capacity of 110 to 130 kg per hour.
In our automatic cashew peeling machine, we have combined mechanical and high air pressure principles to have the maximum peeling effect in only one pass through the machine. Our machine has beautiful appearance and convenient operation, high efficiency, little energy consumption, clean, simple operation, long service life etc. This machine is installed with automatically controlled cashew kernel feeding, peeling and discharging controllers. The kernel and peel will be separated automatically while peeling operation is going on.
Size Available |
Rating Watts. |
250 ml |
150 |
500 ml |
200 |
1 Ltr. |
300 |
2 Ltr. |
450 |
3 Ltr. |
500 |
5 Ltr. |
700 |
10 Ltr. |
1000 |
20 Ltr. |
1800 |
MMAC is trusted source of laminar flow chamber related products and reliable manufacturer of laminar air flow hood. These Laminar Airflow units are perfect for applications such as tissue culture, media preparation, sterile handlings, PCR sample preparation and many more.
Our Horizontal Laminar Air Flow Workstation provides a HEPA filtered clean work area which is perfect for operations required for particle free, bacteria free clean environment.
FEATURESThe double cone blender consists of two cone shaped sections with 45 slopes. The cone sections are welded at their wide ends to a centre band. The blender is mounted between two trunnions that permits the unit to tumble end over end. In operation, material is loaded to a fill level of 50 to 60 % of the blenders capacity.
The blender tumbles and the material in the vessel spreads out. The transition area at the band between the cones prevents the material from sliding along the inner wall and instead causes the material to fold over itself. This provides gentle mixing with only very slight shear.
The blender is ideal for soft powders of granules that degrade by attrition. The smooth transition area in the vessel also simplifies cleaning because there are no areas to trap particles and cross-contaminate batches. Contra rotary baffles with mechanical seals at both ends can be provided for critical mixing applications.
SALIENT FEATUREShe conical shape at both ends enables uniform mixing and easy discharge.
All contact parts are made out of stainless 304 or 316 quality material, as required by customer.
Maximum care has been taken to ensure safe operation of the unit.
Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model )
Two nos. of safety road will be provided at back side. ( One LH side & one RH side )
Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.
One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.
Cone will be mirror polished from the inside & outside & structure will be matt polished.
All moving parts covered with SS304 covers.
Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
As per customer requirement machine will be provided with left side drive or with right side drive. The conical shape at both ends enables uniform mixing and easy discharge.
Worm reduction gear use for speed reduction.
Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
Inside & outside of the cone will be polished to the mirror finished.
All safety guards & covers made out of SS304 in GMP Model.
Multi mill is a self contained portable unit useful for high speed Granulating, Pulverizing, Mixing, Shredding and Chopping of a wide range of wet and dry materials without special attachments.
Multi Mill operates on the principle of variable force swing, beaters having both knife and impact edges rotating within a selected screen to get the required size reduction. Multi mill is designed to utilize the principle of variable force swing beaters having both knife and impact edges rotating within a selected screen to control the particle reduction, material fed in to the processing chamber moves to the periphery and passes through the screen radially and tangentially.
Machine rated for continuous operation
Vibro sifters are used for raw material sieving in pharmaceutical, food and chemical industry. Raw material is fed through in feed hopper and there is a sieve of required mesh size through which the sieved material falls.
There is Vibro motor and spring type suspension system through which the vibration of the Vibro motor are transmitted to the sieve chamber. As the sieve vibrates the material gets sifted or sieved through it.
SALIENT FEATURESSimplified design and construction which is maintenance free
For dust free system, gaskets can be used at in feed mouth and at the outlet mouth of the sifter
Vibro motor gives trouble free performance for much longer time and so it is better than mechanical sifters
Removal of sieve is very easy as there are user friendly clamps for change of sieve or for removal of chamber
Castor wheel which are PU coated with stainless steel brackets and thrust bearings ensures easy movement of Vibro motor sifter in the production area.
The packing conveyor belt is having stainless steel table top with moving endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box.
The conveyor belt brings the container or products from the labeling/blister/strip machine, operator in turn pickup These bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place.
SALIENT FEATURESStirrers have maintenance free Electric or Air motors driven mixing elements ideally suited for continuous duty stirring and mixing applications. Stirrers have sturdy adjustable stand, low noise, smooth start and stop with heavy duty AC/ DC Universal or Induction Motors ranging from 1/12 HP to 1.5HP. and speed 100 RPM to 15000 RPM.
Material of construction is of Stainless Steel SS 304 or SS 316. These are used to stir various liquids and used in a variety of Pharmaceutical, Beverages and Food industries. Tanks offered by us are manufactured using superior quality material and has resistance against corrosion & high reliability.