Our range of Hot Air Oven is widely used in various industries and laboratories in their day-to-day heating and drying activities. These high-end ovens are manufactured in our well-equipped production units, using best possible quality input material. Our testing engineers work hard to check these products in our in-house testing units.

• Hot air ovens are sturdy double walled units
• Inner chamber: S.S.
• Outer wall: SS / Mild Steel with Power coating
• Gap between the walls fitted with glass wool insulation to avoid heat loses.
• Heating elements are made of high grade chrome plated microme wire
• Equipped with thermostat to control the temperature
• Temperature range 50 C TO 250 C and Accuracy: +- 2 C
• Air Ventilations are placed on top of both sides to remove hot gases / fumes
• Heaters placed at the right and left side of the inner chamber
• Control switches & pilot lamps are fitted on the front panel
• Supplied with G.I. wire mesh.

Designed specially for biological Oxygen demand determination and other applications like general incubation, serum studies and enzyme assays tests. Inner made of stainless steel 304 and outer mild steel construction powder coated. The gap between the walls is filled with fine quality glass wool insulation. Forced air circulation fan motor is provided for circulating air uniformly in the chamber. Solid states electronic temperature control with digital display provides uniform temperature. Supplied with two perforated stainless steel trays and 5amps socket inside the chamber. Operating temperature range 5C to 50C with accuracy 1C

Rectangular water bath is useful for boiling and general purpose work. Rectangular Water Bath is made up of long lasting single walled kettle element. Made of thick guage stainless steel, the lid is having 6 or 12 holes with concentric rings.

• Double walled in construction
• Inner chamber SS and outer made of M.S. with powder coating
• Temp. range 5 C above ambient to 95 C accuracy 2 c
• Temp. controlled by capillary type thermostat
• Top lid with concentric rings made of stainless steel
• The gap between the inner and outer chamber filled with glass wool insulation to minimize heat loss
• Immersion type Heater should be provide
• Long lasting elements Concentric rings to use flask from 50ml to 500ml capacity.
• Positive screw to tighten the lid to obtain preface seal

Our range of Hot Air Oven is widely used in various industries and laboratories in their day-to-day heating and drying activities. These high-end ovens are manufactured in our well-equipped production units, using best possible quality input material. Our testing engineers work hard to check these products in our in-house testing units.

• Hot air ovens are sturdy double walled units
• Inner chamber: S.S.
• Outer wall: SS / Mild Steel with Power coating
• Gap between the walls fitted with glass wool insulation to avoid heat loses.
• Heating elements are made of high grade chrome plated microme wire
• Equipped with thermostat to control the temperature
• Temperature range 50 C TO 250 C and Accuracy: +- 2 C
• Air Ventilations are placed on top of both sides to remove hot gases / fumes
• Heaters placed at the right and left side of the inner chamber
• Control switches & pilot lamps are fitted on the front panel
• Supplied with G.I. wire mesh.

Designed specially for biological Oxygen demand determination and other applications like general incubation, serum studies and enzyme assays tests. Inner made of stainless steel 304 and outer mild steel construction powder coated. The gap between the walls is filled with fine quality glass wool insulation. Forced air circulation fan motor is provided for circulating air uniformly in the chamber. Solid states electronic temperature control with digital display provides uniform temperature. Supplied with two perforated stainless steel trays and 5amps socket inside the chamber. Operating temperature range 5C to 50C with accuracy 1C

Rectangular water bath is useful for boiling and general purpose work. Rectangular Water Bath is made up of long lasting single walled kettle element. Made of thick guage stainless steel, the lid is having 6 or 12 holes with concentric rings.

• Double walled in construction
• Inner chamber SS and outer made of M.S. with powder coating
• Temp. range 5 C above ambient to 95 C accuracy 2 c
• Temp. controlled by capillary type thermostat
• Top lid with concentric rings made of stainless steel
• The gap between the inner and outer chamber filled with glass wool insulation to minimize heat loss
• Immersion type Heater should be provide
• Long lasting elements Concentric rings to use flask from 50ml to 500ml capacity.
• Positive screw to tighten the lid to obtain preface seal