Write a Review
Our Products
Pipe Caps
2 Products availableCables And Wire Accessories
1 Products availableAdhesives
1 Products availableSealants
1 Products availableOur offered Product range includes Right Angle Boot, Right Angle Boots and Non Tracking Tubes.
| This data sheet covers the requirements for heat shrink medium voltage boots whose dimensions will shrink to predetermined size upon the application of heat above 125 deg. C. Color of the MV boots is reddish brown. The MV boots are electrically insulating, anti-tracking, UV resistant, weather proof and flame retardant. Both ends of MV boots are internally coated with red mastic and covered with release paper. |
| Typical Applications |
| The MV Right Angle Boots provide insulation and sealing for bushings in cable-end boxes integral with switch-gear and transformers. The mastic sealant provides a water-tight environmental seal to the bushing. The MV boots are also supplied as a part of heat shrink cable termination up to 36 kV for operation in air-filled cable-end boxes, designed with reduced clearances for compound filling. The boots are designed to withstand surges induced during the operational life of the termination. |
| The following application table indicates the dimensions of Right Angle Boots. |
| Right Angle Boot Model |
Cable-end diameter | Bushing-end Diameter | Length M | Length N | ||
| R (mm) | S (mm) | R (mm) | S (mm) | R (mm) | R (mm) | |
| IXL 510 | 15.0 | 27.0 | 35.0 | 81.0 | 125.0 | 145.0 |
| IXL 515 | 15.0 | 48.0 | 35.0 | 81.0 | 125.0 | 145.0 |
| IXL 520 | 25.0 | 48.0 | 35.0 | 81.0 | 125.0 | 145.0 |
| IXL 525 | 25.0 | 70.0 | 35.0 | 95.0 | 125.0 | 145.0 |
| IXL 530 | 30.0 | 60.0 | 60.0 | 130.0 | 150.0 | 165.0 |
| IXL 535 | 30.0 | 75.0 | 60.0 | 170.0 | 150.0 | 165.0 |
| Ikebana NTT, heat shrink medium wall tubing, is a non-tracking tubing for indoor and outdoor applications for termination of medium voltage XLPE and paper insulated power cables. Ikebana NTT has good resistance to tracking and erosion which provides excellent electrical insulation to the components inside. It offers good protection from environmental effects, ultra-violet radiation and moisture. The tough cross-linked polyolefin material provides good mechanical protection. Ikebana NTT is easy to install. A common gas torch is required to heat and recover the tubes onto the power cables or accessories. Ikebana NTT has a high shrink ratio which allows it to be used with a wide range of cable sizes. |
| Ikebana heat shrink medium wall non-tracking tubes have: |
|
Amrut S. Abhyankar, T. S. Swaminathan (IKEBANA ELECTRONICS PVT. LTD.)
302, Sagar Prabhat Industrial Estate,
Near Check Naka, Dahisar (E),
- 400 068,, Mumbai, Maharashtra
Share us via
