We offer Raw Magnesite which is used as raw material in varied applications. This Raw Magnesite is offered to the world wide customers at highly competitive prices. The Raw Magnesite in which we deal has good physical and chemical properties and is therefore widely demanded in national and international market.

• Attributes:
  • Crystallized in the form of lumps
  • White in color
  • Specific gravity of 2.9-3.1
  • Hardiness f=6-8
• Used For Making:
  • Magnesium oxide
  • DBM
  • Making alloy steel

We offer Raw Magnesite which is used as raw material in varied applications. This Raw Magnesite is offered to the world wide customers at highly competitive prices. The Raw Magnesite in which we deal has good physical and chemical properties and is therefore widely demanded in national and international market.

• Attributes:
  • Crystallized in the form of lumps
  • White in color
  • Specific gravity of 2.9-3.1
  • Hardiness f=6-8
• Used For Making:
  • Magnesium oxide
  • DBM
  • Making alloy steel

The Calcined Magnesite Powder> that we deal is as well popular with the name of Magnesium oxide/. We provide Calcined Magnesite Powder/ that is available from 70% to 85% range. Calcined Magnesite also known as Magnesium Oxide*(MGO).Calcined Magnesite also availble in Lump form.

• Attribute:
  • Reliable
  • Well High purity
  • High solubility in water
• Uses:
  • Oxy-chloride Flooring
  • Grinding Wheel Industry
  • Abrasive bricks for grinding and polishing industry

dead-burned magnesite, also known as refractory magnesia, is produced from the heating of magnesite or magnesium hydroxide and is the primary component in refractory materials.

• attribute:
  • unshaped refrectory material
  • available from 75% to 97% mgo
• uses:
  • refractory industry for manufacture of basic refractory bricks 
  • manufacturing of magnesite cupules
  • manufacture of ramming mass composition, fettling material and magnesite mortar
  • it is used in slag beneficiation and in slag splashing in arc furnaces
  • it is also used as a coating material in steel industry

.

Basic ramming mass is a dry lining material for unalloyed and alloyed steel castings. 

Chemical analysis :

• mgo - 82%
• cr2o3 - 8%
• sio2 - 7%
• fe2o3 - 1.5%
• tio2 - .0.5%

Physical analysis :

• grain size - 0 -5 mm
• humidity - 0.1% max.
• Bulk density - 2.2 grmcm3
• required density - 2.8 grmcm3
• sintering temperature - 1250 degree c
• max. Service temperature - 1700 degree c

Gunning refractories can be installed quickly and are mostly used as maintance or repair material.Gunning mixes are granular refractory mixtures designed for application with air replacement guns.

Application of Gunning mass:

• Maintance of blastfurnace
• Maintance of Bof or converter
• Maintance of EAF
• Maintance of Tundish

Physical Properties:

• Refractoriness (SK) (Min) 38
• PLC (%) after firing to 1550°C for 2hrs. -1.5
• Grading (mm) 0-3
• CCS (kg/cm²) (Max) after firing to 1500°C for 2hrs. 200

Chemical Properties:

• MgO (%) (Min) 85
• Cr 2 O3 (%) (Min) 0

We are main supplier for this product.

Dunite is an ultramafic plutonic rock that is composed almost exclusively of olivine. “Ultramafic” means that mafic minerals form more than 90% on the rocks composition. Most common mafic minerals in ultramafic rocks are definitely pyroxenes and olivine (if hornblende is present it is added to pyroxenes). Rocks that contain more than 40% olivine are peridotites. Note that this 40% means 40% of olivine-pyroxene(hornblende) pair, all other minerals are excluded in current classification scheme.

• Attributes:
  • 45% MgO
  • High purity
• Uses:
  • used to sequester CO2

Dead Burnt Magnesite powder is a high temperature refractory material.

Its widely used for making Magnesite cupels, gunning mass, patching mass & ramming mass.

Available MgO content  85%, 88%, 90% & 92%

dead-burned magnesite, also known as refractory magnesia, is produced from the heating of magnesite or magnesium hydroxide and is the primary component in refractory materials. attribute: unshaped refrectory material available from 65% to 75%

we are main supplier for this product

We are main supplier for this product.

We offer Raw Magnesite which is used as raw material in varied applications. This Raw Magnesite is offered to the world wide customers at highly competitive prices. The Raw Magnesite in which we deal has good physical and chemical properties and is therefore widely demanded in national and international market.

• Attributes:
  • Crystallized in the form of lumps
  • White in color
  • Specific gravity of 2.9-3.1
  • Hardiness f=6-8
• Used For Making:
  • Magnesium oxide
  • DBM
  • Making alloy steel

We offer Raw Magnesite which is used as raw material in varied applications. This Raw Magnesite is offered to the world wide customers at highly competitive prices. The Raw Magnesite in which we deal has good physical and chemical properties and is therefore widely demanded in national and international market.

• Attributes:
  • Crystallized in the form of lumps
  • White in color
  • Specific gravity of 2.9-3.1
  • Hardiness f=6-8
• Used For Making:
  • Magnesium oxide
  • DBM
  • Making alloy steel

The Calcined Magnesite Powder> that we deal is as well popular with the name of Magnesium oxide/. We provide Calcined Magnesite Powder/ that is available from 70% to 85% range. Calcined Magnesite also known as Magnesium Oxide*(MGO).Calcined Magnesite also availble in Lump form.

• Attribute:
  • Reliable
  • Well High purity
  • High solubility in water
• Uses:
  • Oxy-chloride Flooring
  • Grinding Wheel Industry
  • Abrasive bricks for grinding and polishing industry

dead-burned magnesite, also known as refractory magnesia, is produced from the heating of magnesite or magnesium hydroxide and is the primary component in refractory materials.

• attribute:
  • unshaped refrectory material
  • available from 75% to 97% mgo
• uses:
  • refractory industry for manufacture of basic refractory bricks 
  • manufacturing of magnesite cupules
  • manufacture of ramming mass composition, fettling material and magnesite mortar
  • it is used in slag beneficiation and in slag splashing in arc furnaces
  • it is also used as a coating material in steel industry

.

Basic ramming mass is a dry lining material for unalloyed and alloyed steel castings. 

Chemical analysis :

• mgo - 82%
• cr2o3 - 8%
• sio2 - 7%
• fe2o3 - 1.5%
• tio2 - .0.5%

Physical analysis :

• grain size - 0 -5 mm
• humidity - 0.1% max.
• Bulk density - 2.2 grmcm3
• required density - 2.8 grmcm3
• sintering temperature - 1250 degree c
• max. Service temperature - 1700 degree c

Gunning refractories can be installed quickly and are mostly used as maintance or repair material.Gunning mixes are granular refractory mixtures designed for application with air replacement guns.

Application of Gunning mass:

• Maintance of blastfurnace
• Maintance of Bof or converter
• Maintance of EAF
• Maintance of Tundish

Physical Properties:

• Refractoriness (SK) (Min) 38
• PLC (%) after firing to 1550°C for 2hrs. -1.5
• Grading (mm) 0-3
• CCS (kg/cm²) (Max) after firing to 1500°C for 2hrs. 200

Chemical Properties:

• MgO (%) (Min) 85
• Cr 2 O3 (%) (Min) 0

We are main supplier for this product.

Dunite is an ultramafic plutonic rock that is composed almost exclusively of olivine. “Ultramafic” means that mafic minerals form more than 90% on the rocks composition. Most common mafic minerals in ultramafic rocks are definitely pyroxenes and olivine (if hornblende is present it is added to pyroxenes). Rocks that contain more than 40% olivine are peridotites. Note that this 40% means 40% of olivine-pyroxene(hornblende) pair, all other minerals are excluded in current classification scheme.

• Attributes:
  • 45% MgO
  • High purity
• Uses:
  • used to sequester CO2

Dead Burnt Magnesite powder is a high temperature refractory material.

Its widely used for making Magnesite cupels, gunning mass, patching mass & ramming mass.

Available MgO content  85%, 88%, 90% & 92%

dead-burned magnesite, also known as refractory magnesia, is produced from the heating of magnesite or magnesium hydroxide and is the primary component in refractory materials. attribute: unshaped refrectory material available from 65% to 75%

we are main supplier for this product

We are main supplier for this product.