We offer Radiant Warmer is innovatively designed to meet thermoregulatory requirements of new born infants who suffer extremes of heat loss. The radiant warmer can be used in delivery rooms and neonatal intensive care units. The micro control based servo control radiant warmer detects minute variations in skin temperature and adjust the ceramic infrared heater output to maintain the infant's temperature at a prescribed pre set level. salient featuresthe controller is based on microcomputerized systemlarge bnght displays are easy to monitor and for viewing from a distancedouble digital display system provided to measure the infant temperature and to set the required temperaturefeather touch keys provided for easy operationledsystem provided to indicate the heater outputmanual control system providedfault indications with alarm forbaby probe failure1 oc temperature high1 oc temperature lowhigh temperature cut-offpower failurebaby probebaby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software the probe is made up of silicon sheathed cable, which allows easy cleaningbaby trolley (optional)a detachable baby trolley which consists of large baby tray & is made of stainless steel frame with three side acrylic collapsible walls. Trendelenburg & fowler system providedobservation lampa halogen based observation light focus on any area on the bedheatersmgle element (e approved ceramic heater placed in a parabolic reflectorother facilitiesprovision of oxygen cylinderi v stand providedmonitor tray providedphysical parameterslength : 700 mmwidth : 430 mmthickness : 25 mmworking level from ground : 900 mmbaby tray is tilt angle on either side : +/-8omaxweight approx : 35 kgcastors : 50 mm with 2 brake wheels and 2 non - brake wheelsrecommended environmental specificationsoperating temperature range : 200oc to 33ocstorage temperature range : -25oc to 600ocoperating humidity range : 0- 100%rhskin temperature proberange : 28oc to 38ocaccuracy : +/-0.2oc within rangeresolution : 0.1ocprobe interchangeability : +/-0.oc (servo)heater output controllable from 0 to 100% in manual mode (continuously variable)observation lighthalogen based power required : 230v, 50 welectrical specificationselectrical supply : 230v 10%, 50hzpower consumption with heater at max. Output : 750wpower consumptionwith heater, observation lamps on : 800welectrical safetyas per iec 60601-1-2 for medical equipmentsnote : best results obtained if air convective current is low.

We hold an expertise in manufacturing and supplying world class Syringe Pumps. Recognized in operating theatres, intensive care units and general wards across the country, Graseby'' Infusion Syringe Pumps have been trusted by healthcare professionals over years. These Graseby'" 2000 range of Syringe Pumps provide simple, reliable and easy to use infusions for a wide range of clinical therapy areas. Made using premium grade raw materials, our Syringe Pumps are surely the right choice to rely upon. Features

• Syringe Loading Guidelines : The on-pump syringe loading guidelines provide clear instructions to support clinicians where they need it, at the bedside.
• Programming Sequence : The 4 step programming sequence allows for quick and simple programming thus, the clinicians can spend more time with the patient, not the pump.
• Added Safety : The Graseby'" 2000 range of Syringe Pumps also offers a variety of safety features including:
• Post Occlusion Bolus Reduction : In the event of an occlusion alarm the pump will minimize the potential post occlusion bolus by reducing the pressure in the patient tubing.
• Patient Tubing Holder : The patient tubing holder reduces the risk of accidental syringe displacement if the patient line is inadvertently pulled or caught.
• Wide Range Of Alarms : The Syringe Pumps feature a wide range of audio and visual alarms including 'syringe error' and 'barrel clamp open' to ensure clinician awareness and prompt intervention where necessary.

Specifications

Weight	2.1 kg lapprox, including pole clamp]
Dimensions	307mm x 133mm x 128mm [not including pole clamp]
AC Power Supply	220 - 230V or 110 - 120V [not user adjustable] at 50 - 60Hz
Battery Type	Rechargeable 12 V DC Nickel Metal Hydride Ni-MH
Battery Life	4 hours at 5ml/h
KVO Rate	0.5ml/hr [continuous mode, not VTBI]
Programming Range
Infusion Rate	0.1 ml/h to 1200ml/h dependent on syringe size
Volume To Be Infused (VTBII)	0.1 ml to 9999ml
Occlusion Sensing - Pressure Levels:	Approximate Pressure:
Low (L1)	300mmHg 100mmHg 40.0kPa 13.3kPa
Medium (CI)	500mmHg 100mmHg 66.7kPa 13.3kPa
High (HI)	800mmHg 100mmHg 106.7kPa 13.3kPa
Drive Accuracy	2% [Linear Accuracy]

Being one of the reliable Manufacturers and Suppliers in India, the company offers the best quality Hemostatic Gauze. Our Hemostatic Gauze is suitable for severe high pressure bleeding, arterial and venous bleeding, bullet, knife and shrapnel wounds, wound packing and applying through strong blood flow. Made using the finest quality raw materials, our Hemostatic Gauzes are safe to use. The Hemostatic Gauze that we offer is effective to work on hypothermic blood and on blood containing anti-coagulants. The clients can obtain these Hemostatic Gauzes at very affordable prices from us. Benefits

• Works independent of the body's clotting mechanism
• Uses high volume gauze that halves the time taken to pack a cavity and maintains its volume under pressure or on wetting
• Leaves less residual material than a kaolin gauzes

Bubble CPAP System, also known as Bubble Continuous Positive Airway Pressure System is used to correct respiratory insufficiency in premature and very low birth weight infants. Routine use of Bubble CPAP System in such cases may reduce the incidence of chronic lung diseases. Our Bubble CPAP System works by producing oscillations in the delivered air, blended with oxygen, in the inspiratory limb and maintaining positive pressure in the expiratory limb through a water column. The air pressure thus generated during spontaneous breathing is sufficient to open the baby's lungs for proper airflow but unlike a mechanical ventilator does not force the patient to breathe, thereby avoiding any risk or damage to the lungs. The Bubble CPAP System, designed, developed, and fabricated by Intermedica Inc. has various benefits and uses. Benefits And Uses

• Increase transpulmonary pressure
• Increase functional residual capacity
• Decrease intrapulmonary shunting
• Prevent alveolar collapse
• Increase airway diameter
• Increase lung compliance
• Conserve surfactants
• Splint the airway
• Splint the diaphragm
• Stimulate lung Growth

Applications in

• Neonatology
• Paediatrics
• Labour Room
• NICU/PICU

Features

• Built-in air/oxygen blender for selecting 210/0-1000/0oxygen
• Inspiratory pressure control with digital display from 3cm H20to 15cm H20
• Inspiratory flow control from 3 Ipm to 151pm
• PEEPsetting from 1 cm H20 to 10 cm H20
• Airway pressure display analogue
• Control and digital display of delivered gas Temperature ( 2^oc)
• Auto cut-off heater at set temperature
• Provision for connecting to central medical gas pipe line
• Built-in humidifier on trolley
• Main unit and air compressor mounted on trolley
• :rrolley on four wheels with brakes on front two wheels
• Articulated patient circuit arm
• Battery back-up for 1 hour. (optional)
• MainsSupply 230volts 50Hza.c

Standard Accessories

• Power cord
• Neonatal patient circuit (autoclavable)
• Nasal cannula set of 1 to 5 size
• Mask neonatal
• High pressure hose for air
• High pressure hose for oxygen
• Temperature sensor probe

The cutting edge Transport Ventilator can be availed from us, which is known for its efficiency. The company is a renowned Transport Ventilator Manufacturer, Importer and Supplier in India. This Transport Ventilator is especially designed by professionals, who are well-aware about the technological advancements. Thus, our Transport Ventilator possesses some of advanced features that are never seen before. Specialty

• Designed by experts
• Advanced features
• Reliable performance
• Longer working life

We are instrumental in bringing forth the ICU Ventilator that is widely used at hospitals and nursing homes. The cutting edge ICU Ventilator can be availed from us, which is known for its efficiency. The company is a renowned ICU Ventilator Manufacturer, Importer and Supplier in India. This Ventilator is especially designed by qualified professionals, who are well-aware about the new technological advancements. Our ICU Ventilator is available in diverse specifications and models, at the market leading prices. The Main Characteristics of Vivo Ventilator

• It is capable of treating patients from neonates to adults
• It has 10.7 Inch colorful monitor
• Exclusive distance visualization (InterNet and IntraNet)
• "Roll-over" knob - easy adaptation to the user
• Up-to-date modes of ventilatory support
• Volume-Controlled (VCV) Assist/Control
• Pressure-Controlled (PCV) Assist/Control
• Pressure Support (PSV)
• CPAP + PSV
• SIMV'(VCV + PSV
• SIMV (PCV) + PSV
• Mandatory Minute Ventilation (MMV) + PSV
• PSV + Tidal Volume Assured
• Positive Biphasic Pressure (APRV)
• Continuous flow. time cycled. pressure limited.(neo
• Non-Invasive Ventilation

Unique Watchdog FeatureWatchdog is an independent system of function vigilance of the electronic circuit. It is not related withBack-up ventilation and has a ventilatory mode by pressure control (PCV) permanent and pre-programmed in the factory, Entrance Inaction

• Soon after 30 seconds when turning on the ventilator and the first screen is not accepted to pass the calibration ofthe respiratory circuit.
• When the microprocessor loses the program sequence control that regulates the ventilation.

The entrance in active action activates a signal that produces the beginning ofthis mode of emergency ventilation. Emergency VentilationThe ventilator is activated, for any category (adult, paediatric), the following ventilation form

• Ventilatory mode: By pressure (PCV). Cannot be changed .
• Inspiratory Pressure (PCV): 15 cmH20. The value can be changed.
• Rise Time: With 25% to all the categories .
• Inspiratory Time: 0.8 sec .The value can be changed.
• Frequency: 15 rpm. The value can be changed.
• Sensitivity by pressure: -1.5 cmH20.
• Fi02: 100%. Disabled for change.
• PEEP: 0 (zero). disabled
• Silence control: Enabled.
• High Pressure alarm: 30 cmH20. The value can be changed.
• Low Pressure Alarm: 5 cmH20. The value can be changed.
• Alarm and values ofVT (min and max) and Ve: Disabled.
• Monitor handling: Disabled.

Specifications

• Classification : The VIVO is a microprocessor based, pressure or flowcontroller, with pressure. flow or manual trigger It IS pressure, volume or flow limited. It can combine pressure and flow control in each breath.
• Controls
  • FIO: 0.21 10
  • Inspiratory Time : 0 13 seconds
  • I:ERatio : VCV'11-120IPCV 51-1.20
  • Respiratory Rate : 1-180 rpm
  • Tidal Volume : 10 - 2500 mL.
  • Sensitivity (PEEP compensated) : Trigger flow 0.5 to 5 Umin I Trigger pressure. -0.5 -10 cm H O.
  • Pressure Control (PCV) : 3-80 cm H 0 ( with Rise Time).
  • Pressure Support (PSV) : 0-80 cm H 0 ( with Rise Time).
  • Expiratory Sensivity : 5, 10, 15, 25(default), 33, or 40% of the peak flow.
  • PEEP/CPAP 0-50 cm H 0
  • Nebulizer Functional during inspiration only
  • Inspiratory flow : In VCV Automatic regulation Iin PCV and PSV up to 200 t/rnin.
  • Sigh (VCV only) : Number, Events per hour, Volume, and Max.Pressure
  • Inspiratory Pause(Hold) (VCV only) : 0.25 to 2 seconds.
  • Manual Breath : For an inspiration or sigh.
  • 02 100%: pre and post oxygenation for suction. 120 s with 30 s in the middle for suction
  • Waveflow form (VCV) : Square, descending ramp, sine and ascending ramp.
  • Standby : To stop the ventilator and saving the selected parameters
  • TCP/IP exit : For external communication.(optional)
• Measured Parameters : Airway Pressure. Peak, Plateau, Mean, Base I Peak Flow I Expiratory Time Inspiratory Time and I:E Ratio of spontaneous breaths I Expired Tidal Volume Expired Minute Volume I Inspired Fi02 (optional)
• Alarms : High and Low Inspiratory Pressure, High and Low Tidal Volume, Apnea, High and Low Minute Volume, High breathing rate, High and Low PEEP, Low and High Fi02 (optional), Gas Supply Failure [Low Battery] Power Loss, Technical
• The eteans are ecuvetea accordmg to levels of priorities with audible and visual messages on the screen Each event is documented in a uet With date and hour, The equipment also has a emergency ventitetion called 'Watchdog"
• Respiratory Mechanics : This option allows the determination of: AutoPEEP I Dynamic and Static Compliance I Static and Dynamic Resistance I Slow Vital Capacity I PO.1
• Graphic Display (Screen) : Selection of pressure, volume and flow vs. time wave forms, and pressure/volume and flow/volume loops I frozen Image I Sweep speed selection of horizontal axis and scale for vertical axis I Trend of tidal volume, rate, peak and base pressure peak flow and dynamic compliance I Pressure bar showing airway I access in the distance for InterNet or IntraNet.(optional)
• Electrical
  • Voltage Range : 100 a 240 Volts (auto switching)
  • Frequency : 50 - 60 Hz
  • Power : 30 Watts
  • Internal Battery : 4 hours

We are instrumental in bringing forth this NAD Narkomed 2B Anesthesia Machine. This Anesthesia Machine that we offer is one of the most reliable machines available in the markets. Our Anesthesia Machine comes with 9 & N20 and holds three vaporizers. Further, it includes F-Style ascending bellows with oxygen, volume and pressure monitoring. The clients can avail from us this, Anesthesia Machine at budget friendly prices. Features

• 19.1 and 19.3 vaporizers available
• ORM standard; ORMC optional
• Ventilator options: Pneumatic or electronic, ascending or descending bellows
• Oxygen monitor and Cp absorber standard
• AVE Electronic ventilator
• Absorber and scavenger
• Oxygen analyzer
• Breathing pressure monitor
• Respiratory volume
• Centralized alarm and data
• Oxygen ratio controller
• Pressure limit controller

Specifications

Maximum Height	68 (173 cm)
Maximum Width	40 (102 cm)
Maximum Depth	25 (63.5 cm)
Table-top Height	34 (86 cm)
Table-top Area	271 in. sq. (1, 749 cm2)
Shelf Area	200 in. sq. (1, 290 cm2)
Drawer Dimensions
Large	14x21x7 (36 x 52 x 18 cm)
Small	14x17x3 (36 x 43 x 8 cm)
Nominal Weight	325 lb. (147 kg)

We offer Baby Incubator. Our baby incubator "v-150" is designed to meet the safest and most stable environment. This baby incubator offers the advanced technology and innovative design to meet your most demanding clinical care needs in the nicu. A digital microprocessor controller provides permanent check of all important functions. Built in features of our baby incubator are ensured for proper operation, also gives clear indication of temperature settings. salient featuresthe controller is based on micro computerized system.large bright displays are easy to monitor and for viewing from a distance.digital display system provided to measure theinfant temperature. Air temperature and to set the required temperature.feather touch keys provided for easy operation.bar graph led system provided to indicate the heater output.fault indications with alarm forbaby probe failureair probe failure1oc temperature high1oc temperature lowhigh temperature cut-offpower failurebaby probe / air probebaby probel air probe is made of highly sensitive sensor and interchangeable, field calibrations taken care of by software. The probe is made up of silicon sheathed cable, which allows easy cleaning. other facilitiesiv stand providedstorage drawers provided. Infant whilst incubator in usefour port doors provided to handle thetrendelenburg & fowler system providedtechnical specificationsmattress : 525 x 380 mmphysical parametersheight : 1425 mmdepth : 585 mmwidth : 945 mmworking level from the ground : 900 mmbaby tray tilt angle on either side : +1_80maxweight : 60 kg (approx)castors : 125 mm with 2 brake wheels and 2 non-brake wheelsrecommended environmental specificationsoperating temperature range : 200oc to 33ocstorage temperature range : -25oc to 60ocoperating humidity range : 0 to 100%rhskin temperature proberange : 28oc to 38ocaccuracy : +1-0.2oc withm rangeresolution : 0.1ocprobe interchangeability : +1-0.2c (servo)air temperature proberange : 28oc to 38ocaccuracy : +1-0.2oc within rangeresolution : 0.1ocprobe interchangeability : +/-o.2oc (servo)electrical specificationselectrical supply : 230v - 10%, 50 hzpower consumption with heater at max. Output : 500welectrical safetyas per lee 60601-1-2 for medical equipments

BIPAP (ISleep 22) is an advanced high performance and sophisticated Bi-level S device for sleep therapy at home. This Sleep Apnea Machine is smoothly synchronizes with the patients breathing effort. As the patient demands for a new breath the iSleep 22 responds immediately and delivers the exact pressure required, allowing a very comfortable breathing. The backup-frequency takes over the patient's breathing during intermittent central apneas. Made available in different specifications, our iSleep 22 Sleep Apnea Machine is very affordable. Features

• Small footprint even with the integrated humidifer attached
• Adjustable settings for inspiratory trigger and automatic leakage-compensated expiratory trigger
• Automatic back-up rate of 6 breaths per minute
• Enhanced User Interface, extremely easy to use with big buttons
• Large backlit graphical display with built-in alarm clock
• Designed for travelling; world wide mains power compatibility and DC power options
• Designed for a wide range of masks
• Unique snooze function
• Comprehensive yet easy to use PC-software with remote control capability
• Detailed patient log
• Memory card capability

» Specifications

Ventilation Modes	CPAPBiLevel
Device modes	ClinicalHorne
IPAP	4 to 20 cm H2O
EPAP	4 to 20 cm H2O
Integrated Humidfer	1 t0 9
Expiratory Trigger	Automatic
Back-up Rate	6 BPM
Maximum Flow	> 125 litres/minat 1/3 of max pressure: 1081/minat 2/3 of max pressure: 132 I/minat max pressure: 132 I/min
Maximum limited pressure during single fault condition	30 cm H, o
Breathing resistance under single fault condition	0.9 cm H.O at 30 I/min3.2 cm H, o at 60 I/min
Digital output	Yes
Sound level at 10 cm H2O	Less than 30 dB(A)
Indications
Internal function failure	Message on the display
Power failure indication	Message on the display
Dimensions
WxHxD	173 x 172 x 201 mm (with Humidifer HA 20)
Weight	1.9 kg
Air outlet	22 mm male conical standard connector
Power Supplies
Mains supply	100 to 240 V AC
Extemal supply	24V DC, 12V adapter available
Operating Conditions
Recommended mask leakage	20 to 40 litres/min at 10 cm H2O
Minimum mask leakage	12 litres/min at 4 cm H2O

The company presents family of radiant warmers to meet the diverse thermo regulatory requirements of patient at your hospital. V-800 Open Care System is designed according to the most recent international standards and provides the neonate with an adequate and secure environment of its care. This compact and mobile Open Care System with integrated phototherapy system is a must for every well-run and busy hospital. The integrated halogen based Phototherapy system ensures that optimum therapeutic output is available on demand to manage the hyperbilirubinaemia without disturbing the infant. Features

• The controller is based on Microcomputerized system.
• Large bright displays are easy to monitor and for viewing from a distance.
• Double digital display system provided to measure the Infant temperature and to set the required temperature.
• Feather touch keys provided for easy operation.
• Bar graph LED system provided to indicate the heater output.
• Manual control system provided.
• Fault Indications with alarm for Baby probe failure, 1^oC temperature high, 1 ^oC temperature low, High temperature cut-off, Power failure

The Electronic Controller

• The controller is based on Microcomputerized system
• Large bright displays are easy to monitor and for viewing from a distance
• Double digital display system provided to measure the Infant temperature and to set the required temperatureFeather touch keys provided for easy operation
• Bar graph LED system provided to indicate the heater output
• Manual control system provided
• Fault Indications with alarm for
  • Baby probe failure
  • 1^oC temperature high
  • 1^oC temperature low
  • High temperature cut-off
  • Power failure

Baby Probe

• Baby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software. The probe is made up of silicon sheathed cable, which allows easy cleaning

Baby Tray

• The large baby tray is made of stainless steel frame with three side acrylic collapsible walls, trendelenburg & fowler system provided

Observation Lamp

• A halogen based observation light focus on any area on the bed

Heater

• Single element CE approved ceramic heater placed in a parabolic reflector

Other Facilities

• Provision of Oxygen cylinder
• I V stand provided
• Monitor tray provided

Physical Parameters Mattress

• Length :700 mm
• Width : 500 mm
• Thickness : 50 mm
• Working level from ground : 1020 mm
• Baby tray is tilt angle on either side : +/-8 max
• Weight Approx : :40 kg
• Castors : 100 mm with 2 brake wheels and 2 non - brake wheels

Recommended Environmental Specifications

• Operating temperature range : 20^oC to 33^oC
• Storage temperature range : -25^oC to 60^oC
• Operating humidity range : 0 - 100% RH

Skin Temperature Probe

• Range : 28^oC to 38^oC
• Accuracy : +/-0.2^oC within range
• Resolution : 1^oC
• Probe interchangeability : +/-0.2^oC (Servo)
• Heater output controllable from 0 to 100% in manual mode (continuously variable)

Phototherapy Unit

• Supply to each lamp : 12V, 50W
• Irradiance : 6 - 8 W /cm 2/nm at bed level

Observation Light

• Halogen based Power required : 12V, 50 W

Electrical Specifications

• Electrical Supply : 230V 10%, 50 Hz
• Power consumption with Heater at max. output : 750W

Power Consumption

• With heater, Phototherapy & observation lamps ON : 1250 W

Electrical Safety

• As per IEC 60601-1-2 for medical equipments

Note : Best results obtained if air convective current is low

The company is ranked amongst one of the major manufacturing and supplying units of LED type Phototherapy Units in India. Designed by experts, our LED type Phototherapy Units are widely used in phototherapy against neonatal jaundice. These LED type Phototherapy Units use high power LED (with the wavelength in the range of 420-490 nm peak at 465 nm). Our LED type Phototherapy Units are a better option than the conventional and CFL Phototherapy Units, as these have 2.5 times the luminance of a blue lamp. Additionally, we offer these LED type Phototherapy Units in varied specifications, in order to suit diverse requirements of the clients. Attributes

• Excellent quality
• Designed by professionals
• Reliable performance
• Longer functional life
• Low power consumption

Features

• Display exhibiting the total hours of treatment
• Display exhibiting the total hours of the bulb use
• High level of radiation in the middle and edges of the focused area
• Unit fixed on castors for easy mobility
• Adjustable and tiltable arm provided to focus the light at desired angle
• Phototherapy based on high technology of blue spectrum radiation source peak at 465 nm
• Microprocessor based LCD Timer to set the Irradiation time

The company has created a strong foothold in the business of manufacturing, importing and supplying Critical Care Ventilator. Designed to precision, the Critical Care Ventilators that we offer are very useful for critical care purposes at hospitals and nursing homes. These Critical Care Ventilators are widely known for excellent battery backup and reliable performance. Thus, are high on demand among the clients all over the medical industry. In addition to this, we offer the Critical Care Ventilators at most competitive prices in the markets. Why Prefer Our Critical Care Ventilator?

• Specially designed by professionals
• Excellent battery backup
• User-friendly controls
• Longer functional life

For more detail click here

The company has excelled in the business of manufacturing and supplying premium grade MAT Tourniquet. Designed by experts, the MAT Tourniquet that we offer provides usable features and real performance required for emergency blood-flow occlusion. Also, the MAT Tourniquet available with us offers the fastest and most powerful life and limb-saving arterial compression. Made available in varied specifications, our MAT Tourniquet is very affordable. Advantages Of MAT Tourniquet

• Fastest to Apply
• Most Effective Occlusion
• Easiest to Apply
• Safest to Apply

We offer High Flow Oxygen Therapy System. Precision flow oxygen therapy system is a high flow heat and humidification device for the non-invasive delivery of inspired gas flows from 1to 40 liters per minute. The technology delivers a perfect synchronization of flow temperature, humidity and oxygen percentage without discomfort via nasal cannula. Our high flow oxygen therapy system moves beyond conventional humidification giving the clinician the ability to manage the key factors in gas conditioning to achieve desired outcomes. Specially designed by experts, this high flow oxygen therapy system is very affordable and reliable at the same time. safety featuresprecise measurement of temperature and flowbuilt-in oxygen blender and oxygen sensordisposable patient circuitbattery backupkey componentsdisposable patient circuitpatient delivery tubevapor transfer cartridgeoxygen blendertechnical specificationsbuilt in oxygen blender. Oxygen percentage is fully adjustable from 21 to 100% when two 40 psi (276 kpa) gas source are used.internal battery backup maintains flow and oxygen percentage for 15 minutes if ac power is cut off. Battery recharge in 1 2 hrs.two alarm levels indicate low and medium priority alarm conditions. Iec60601 1 8 compliant.inlet gas pressure range is 4-70 psi (28-482 kpa). At low gas inlet pressures, maximum flow rate and oxygen percentage setting are automatically reduced to match the inlet pressure. Advantagesautomatically senses cartridge type maximum flow setting is automatically reduced if low flow cartridge is installed.all values and alarms displayed in a single large color coded fitting.easy connection between the delivery tube and disposable water path by a simple press and click fitting.no disinfection necessary. The patient circuit is detachable and disposable.temperature, flow and oxygen percentage are adjusted via a single setting control knob on the front panel.universal power requirements allow use anywhere with only a change of power cord.scheduled maintenance for internal components at 3 year intervals, external gas filters replaced at 6 month intervals, external oxygen sensor replaced annually.

We offer Radiant Warmer is innovatively designed to meet thermoregulatory requirements of new born infants who suffer extremes of heat loss. The radiant warmer can be used in delivery rooms and neonatal intensive care units. The micro control based servo control radiant warmer detects minute variations in skin temperature and adjust the ceramic infrared heater output to maintain the infant's temperature at a prescribed pre set level. salient featuresthe controller is based on microcomputerized systemlarge bnght displays are easy to monitor and for viewing from a distancedouble digital display system provided to measure the infant temperature and to set the required temperaturefeather touch keys provided for easy operationledsystem provided to indicate the heater outputmanual control system providedfault indications with alarm forbaby probe failure1 oc temperature high1 oc temperature lowhigh temperature cut-offpower failurebaby probebaby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software the probe is made up of silicon sheathed cable, which allows easy cleaningbaby trolley (optional)a detachable baby trolley which consists of large baby tray & is made of stainless steel frame with three side acrylic collapsible walls. Trendelenburg & fowler system providedobservation lampa halogen based observation light focus on any area on the bedheatersmgle element (e approved ceramic heater placed in a parabolic reflectorother facilitiesprovision of oxygen cylinderi v stand providedmonitor tray providedphysical parameterslength : 700 mmwidth : 430 mmthickness : 25 mmworking level from ground : 900 mmbaby tray is tilt angle on either side : +/-8omaxweight approx : 35 kgcastors : 50 mm with 2 brake wheels and 2 non - brake wheelsrecommended environmental specificationsoperating temperature range : 200oc to 33ocstorage temperature range : -25oc to 600ocoperating humidity range : 0- 100%rhskin temperature proberange : 28oc to 38ocaccuracy : +/-0.2oc within rangeresolution : 0.1ocprobe interchangeability : +/-0.oc (servo)heater output controllable from 0 to 100% in manual mode (continuously variable)observation lighthalogen based power required : 230v, 50 welectrical specificationselectrical supply : 230v 10%, 50hzpower consumption with heater at max. Output : 750wpower consumptionwith heater, observation lamps on : 800welectrical safetyas per iec 60601-1-2 for medical equipmentsnote : best results obtained if air convective current is low.

We hold an expertise in manufacturing and supplying world class Syringe Pumps. Recognized in operating theatres, intensive care units and general wards across the country, Graseby'' Infusion Syringe Pumps have been trusted by healthcare professionals over years. These Graseby'" 2000 range of Syringe Pumps provide simple, reliable and easy to use infusions for a wide range of clinical therapy areas. Made using premium grade raw materials, our Syringe Pumps are surely the right choice to rely upon. Features

• Syringe Loading Guidelines : The on-pump syringe loading guidelines provide clear instructions to support clinicians where they need it, at the bedside.
• Programming Sequence : The 4 step programming sequence allows for quick and simple programming thus, the clinicians can spend more time with the patient, not the pump.
• Added Safety : The Graseby'" 2000 range of Syringe Pumps also offers a variety of safety features including:
• Post Occlusion Bolus Reduction : In the event of an occlusion alarm the pump will minimize the potential post occlusion bolus by reducing the pressure in the patient tubing.
• Patient Tubing Holder : The patient tubing holder reduces the risk of accidental syringe displacement if the patient line is inadvertently pulled or caught.
• Wide Range Of Alarms : The Syringe Pumps feature a wide range of audio and visual alarms including 'syringe error' and 'barrel clamp open' to ensure clinician awareness and prompt intervention where necessary.

Specifications

Weight	2.1 kg lapprox, including pole clamp]
Dimensions	307mm x 133mm x 128mm [not including pole clamp]
AC Power Supply	220 - 230V or 110 - 120V [not user adjustable] at 50 - 60Hz
Battery Type	Rechargeable 12 V DC Nickel Metal Hydride Ni-MH
Battery Life	4 hours at 5ml/h
KVO Rate	0.5ml/hr [continuous mode, not VTBI]
Programming Range
Infusion Rate	0.1 ml/h to 1200ml/h dependent on syringe size
Volume To Be Infused (VTBII)	0.1 ml to 9999ml
Occlusion Sensing - Pressure Levels:	Approximate Pressure:
Low (L1)	300mmHg 100mmHg 40.0kPa 13.3kPa
Medium (CI)	500mmHg 100mmHg 66.7kPa 13.3kPa
High (HI)	800mmHg 100mmHg 106.7kPa 13.3kPa
Drive Accuracy	2% [Linear Accuracy]

Being one of the reliable Manufacturers and Suppliers in India, the company offers the best quality Hemostatic Gauze. Our Hemostatic Gauze is suitable for severe high pressure bleeding, arterial and venous bleeding, bullet, knife and shrapnel wounds, wound packing and applying through strong blood flow. Made using the finest quality raw materials, our Hemostatic Gauzes are safe to use. The Hemostatic Gauze that we offer is effective to work on hypothermic blood and on blood containing anti-coagulants. The clients can obtain these Hemostatic Gauzes at very affordable prices from us. Benefits

• Works independent of the body's clotting mechanism
• Uses high volume gauze that halves the time taken to pack a cavity and maintains its volume under pressure or on wetting
• Leaves less residual material than a kaolin gauzes

Bubble CPAP System, also known as Bubble Continuous Positive Airway Pressure System is used to correct respiratory insufficiency in premature and very low birth weight infants. Routine use of Bubble CPAP System in such cases may reduce the incidence of chronic lung diseases. Our Bubble CPAP System works by producing oscillations in the delivered air, blended with oxygen, in the inspiratory limb and maintaining positive pressure in the expiratory limb through a water column. The air pressure thus generated during spontaneous breathing is sufficient to open the baby's lungs for proper airflow but unlike a mechanical ventilator does not force the patient to breathe, thereby avoiding any risk or damage to the lungs. The Bubble CPAP System, designed, developed, and fabricated by Intermedica Inc. has various benefits and uses. Benefits And Uses

• Increase transpulmonary pressure
• Increase functional residual capacity
• Decrease intrapulmonary shunting
• Prevent alveolar collapse
• Increase airway diameter
• Increase lung compliance
• Conserve surfactants
• Splint the airway
• Splint the diaphragm
• Stimulate lung Growth

Applications in

• Neonatology
• Paediatrics
• Labour Room
• NICU/PICU

Features

• Built-in air/oxygen blender for selecting 210/0-1000/0oxygen
• Inspiratory pressure control with digital display from 3cm H20to 15cm H20
• Inspiratory flow control from 3 Ipm to 151pm
• PEEPsetting from 1 cm H20 to 10 cm H20
• Airway pressure display analogue
• Control and digital display of delivered gas Temperature ( 2^oc)
• Auto cut-off heater at set temperature
• Provision for connecting to central medical gas pipe line
• Built-in humidifier on trolley
• Main unit and air compressor mounted on trolley
• :rrolley on four wheels with brakes on front two wheels
• Articulated patient circuit arm
• Battery back-up for 1 hour. (optional)
• MainsSupply 230volts 50Hza.c

Standard Accessories

• Power cord
• Neonatal patient circuit (autoclavable)
• Nasal cannula set of 1 to 5 size
• Mask neonatal
• High pressure hose for air
• High pressure hose for oxygen
• Temperature sensor probe

The cutting edge Transport Ventilator can be availed from us, which is known for its efficiency. The company is a renowned Transport Ventilator Manufacturer, Importer and Supplier in India. This Transport Ventilator is especially designed by professionals, who are well-aware about the technological advancements. Thus, our Transport Ventilator possesses some of advanced features that are never seen before. Specialty

• Designed by experts
• Advanced features
• Reliable performance
• Longer working life

We are instrumental in bringing forth the ICU Ventilator that is widely used at hospitals and nursing homes. The cutting edge ICU Ventilator can be availed from us, which is known for its efficiency. The company is a renowned ICU Ventilator Manufacturer, Importer and Supplier in India. This Ventilator is especially designed by qualified professionals, who are well-aware about the new technological advancements. Our ICU Ventilator is available in diverse specifications and models, at the market leading prices. The Main Characteristics of Vivo Ventilator

• It is capable of treating patients from neonates to adults
• It has 10.7 Inch colorful monitor
• Exclusive distance visualization (InterNet and IntraNet)
• "Roll-over" knob - easy adaptation to the user
• Up-to-date modes of ventilatory support
• Volume-Controlled (VCV) Assist/Control
• Pressure-Controlled (PCV) Assist/Control
• Pressure Support (PSV)
• CPAP + PSV
• SIMV'(VCV + PSV
• SIMV (PCV) + PSV
• Mandatory Minute Ventilation (MMV) + PSV
• PSV + Tidal Volume Assured
• Positive Biphasic Pressure (APRV)
• Continuous flow. time cycled. pressure limited.(neo
• Non-Invasive Ventilation

Unique Watchdog FeatureWatchdog is an independent system of function vigilance of the electronic circuit. It is not related withBack-up ventilation and has a ventilatory mode by pressure control (PCV) permanent and pre-programmed in the factory, Entrance Inaction

• Soon after 30 seconds when turning on the ventilator and the first screen is not accepted to pass the calibration ofthe respiratory circuit.
• When the microprocessor loses the program sequence control that regulates the ventilation.

The entrance in active action activates a signal that produces the beginning ofthis mode of emergency ventilation. Emergency VentilationThe ventilator is activated, for any category (adult, paediatric), the following ventilation form

• Ventilatory mode: By pressure (PCV). Cannot be changed .
• Inspiratory Pressure (PCV): 15 cmH20. The value can be changed.
• Rise Time: With 25% to all the categories .
• Inspiratory Time: 0.8 sec .The value can be changed.
• Frequency: 15 rpm. The value can be changed.
• Sensitivity by pressure: -1.5 cmH20.
• Fi02: 100%. Disabled for change.
• PEEP: 0 (zero). disabled
• Silence control: Enabled.
• High Pressure alarm: 30 cmH20. The value can be changed.
• Low Pressure Alarm: 5 cmH20. The value can be changed.
• Alarm and values ofVT (min and max) and Ve: Disabled.
• Monitor handling: Disabled.

Specifications

• Classification : The VIVO is a microprocessor based, pressure or flowcontroller, with pressure. flow or manual trigger It IS pressure, volume or flow limited. It can combine pressure and flow control in each breath.
• Controls
  • FIO: 0.21 10
  • Inspiratory Time : 0 13 seconds
  • I:ERatio : VCV'11-120IPCV 51-1.20
  • Respiratory Rate : 1-180 rpm
  • Tidal Volume : 10 - 2500 mL.
  • Sensitivity (PEEP compensated) : Trigger flow 0.5 to 5 Umin I Trigger pressure. -0.5 -10 cm H O.
  • Pressure Control (PCV) : 3-80 cm H 0 ( with Rise Time).
  • Pressure Support (PSV) : 0-80 cm H 0 ( with Rise Time).
  • Expiratory Sensivity : 5, 10, 15, 25(default), 33, or 40% of the peak flow.
  • PEEP/CPAP 0-50 cm H 0
  • Nebulizer Functional during inspiration only
  • Inspiratory flow : In VCV Automatic regulation Iin PCV and PSV up to 200 t/rnin.
  • Sigh (VCV only) : Number, Events per hour, Volume, and Max.Pressure
  • Inspiratory Pause(Hold) (VCV only) : 0.25 to 2 seconds.
  • Manual Breath : For an inspiration or sigh.
  • 02 100%: pre and post oxygenation for suction. 120 s with 30 s in the middle for suction
  • Waveflow form (VCV) : Square, descending ramp, sine and ascending ramp.
  • Standby : To stop the ventilator and saving the selected parameters
  • TCP/IP exit : For external communication.(optional)
• Measured Parameters : Airway Pressure. Peak, Plateau, Mean, Base I Peak Flow I Expiratory Time Inspiratory Time and I:E Ratio of spontaneous breaths I Expired Tidal Volume Expired Minute Volume I Inspired Fi02 (optional)
• Alarms : High and Low Inspiratory Pressure, High and Low Tidal Volume, Apnea, High and Low Minute Volume, High breathing rate, High and Low PEEP, Low and High Fi02 (optional), Gas Supply Failure [Low Battery] Power Loss, Technical
• The eteans are ecuvetea accordmg to levels of priorities with audible and visual messages on the screen Each event is documented in a uet With date and hour, The equipment also has a emergency ventitetion called 'Watchdog"
• Respiratory Mechanics : This option allows the determination of: AutoPEEP I Dynamic and Static Compliance I Static and Dynamic Resistance I Slow Vital Capacity I PO.1
• Graphic Display (Screen) : Selection of pressure, volume and flow vs. time wave forms, and pressure/volume and flow/volume loops I frozen Image I Sweep speed selection of horizontal axis and scale for vertical axis I Trend of tidal volume, rate, peak and base pressure peak flow and dynamic compliance I Pressure bar showing airway I access in the distance for InterNet or IntraNet.(optional)
• Electrical
  • Voltage Range : 100 a 240 Volts (auto switching)
  • Frequency : 50 - 60 Hz
  • Power : 30 Watts
  • Internal Battery : 4 hours

We are instrumental in bringing forth this NAD Narkomed 2B Anesthesia Machine. This Anesthesia Machine that we offer is one of the most reliable machines available in the markets. Our Anesthesia Machine comes with 9 & N20 and holds three vaporizers. Further, it includes F-Style ascending bellows with oxygen, volume and pressure monitoring. The clients can avail from us this, Anesthesia Machine at budget friendly prices. Features

• 19.1 and 19.3 vaporizers available
• ORM standard; ORMC optional
• Ventilator options: Pneumatic or electronic, ascending or descending bellows
• Oxygen monitor and Cp absorber standard
• AVE Electronic ventilator
• Absorber and scavenger
• Oxygen analyzer
• Breathing pressure monitor
• Respiratory volume
• Centralized alarm and data
• Oxygen ratio controller
• Pressure limit controller

Specifications

Maximum Height	68 (173 cm)
Maximum Width	40 (102 cm)
Maximum Depth	25 (63.5 cm)
Table-top Height	34 (86 cm)
Table-top Area	271 in. sq. (1, 749 cm2)
Shelf Area	200 in. sq. (1, 290 cm2)
Drawer Dimensions
Large	14x21x7 (36 x 52 x 18 cm)
Small	14x17x3 (36 x 43 x 8 cm)
Nominal Weight	325 lb. (147 kg)

We offer Baby Incubator. Our baby incubator "v-150" is designed to meet the safest and most stable environment. This baby incubator offers the advanced technology and innovative design to meet your most demanding clinical care needs in the nicu. A digital microprocessor controller provides permanent check of all important functions. Built in features of our baby incubator are ensured for proper operation, also gives clear indication of temperature settings. salient featuresthe controller is based on micro computerized system.large bright displays are easy to monitor and for viewing from a distance.digital display system provided to measure theinfant temperature. Air temperature and to set the required temperature.feather touch keys provided for easy operation.bar graph led system provided to indicate the heater output.fault indications with alarm forbaby probe failureair probe failure1oc temperature high1oc temperature lowhigh temperature cut-offpower failurebaby probe / air probebaby probel air probe is made of highly sensitive sensor and interchangeable, field calibrations taken care of by software. The probe is made up of silicon sheathed cable, which allows easy cleaning. other facilitiesiv stand providedstorage drawers provided. Infant whilst incubator in usefour port doors provided to handle thetrendelenburg & fowler system providedtechnical specificationsmattress : 525 x 380 mmphysical parametersheight : 1425 mmdepth : 585 mmwidth : 945 mmworking level from the ground : 900 mmbaby tray tilt angle on either side : +1_80maxweight : 60 kg (approx)castors : 125 mm with 2 brake wheels and 2 non-brake wheelsrecommended environmental specificationsoperating temperature range : 200oc to 33ocstorage temperature range : -25oc to 60ocoperating humidity range : 0 to 100%rhskin temperature proberange : 28oc to 38ocaccuracy : +1-0.2oc withm rangeresolution : 0.1ocprobe interchangeability : +1-0.2c (servo)air temperature proberange : 28oc to 38ocaccuracy : +1-0.2oc within rangeresolution : 0.1ocprobe interchangeability : +/-o.2oc (servo)electrical specificationselectrical supply : 230v - 10%, 50 hzpower consumption with heater at max. Output : 500welectrical safetyas per lee 60601-1-2 for medical equipments

BIPAP (ISleep 22) is an advanced high performance and sophisticated Bi-level S device for sleep therapy at home. This Sleep Apnea Machine is smoothly synchronizes with the patients breathing effort. As the patient demands for a new breath the iSleep 22 responds immediately and delivers the exact pressure required, allowing a very comfortable breathing. The backup-frequency takes over the patient's breathing during intermittent central apneas. Made available in different specifications, our iSleep 22 Sleep Apnea Machine is very affordable. Features

• Small footprint even with the integrated humidifer attached
• Adjustable settings for inspiratory trigger and automatic leakage-compensated expiratory trigger
• Automatic back-up rate of 6 breaths per minute
• Enhanced User Interface, extremely easy to use with big buttons
• Large backlit graphical display with built-in alarm clock
• Designed for travelling; world wide mains power compatibility and DC power options
• Designed for a wide range of masks
• Unique snooze function
• Comprehensive yet easy to use PC-software with remote control capability
• Detailed patient log
• Memory card capability

» Specifications

Ventilation Modes	CPAPBiLevel
Device modes	ClinicalHorne
IPAP	4 to 20 cm H2O
EPAP	4 to 20 cm H2O
Integrated Humidfer	1 t0 9
Expiratory Trigger	Automatic
Back-up Rate	6 BPM
Maximum Flow	> 125 litres/minat 1/3 of max pressure: 1081/minat 2/3 of max pressure: 132 I/minat max pressure: 132 I/min
Maximum limited pressure during single fault condition	30 cm H, o
Breathing resistance under single fault condition	0.9 cm H.O at 30 I/min3.2 cm H, o at 60 I/min
Digital output	Yes
Sound level at 10 cm H2O	Less than 30 dB(A)
Indications
Internal function failure	Message on the display
Power failure indication	Message on the display
Dimensions
WxHxD	173 x 172 x 201 mm (with Humidifer HA 20)
Weight	1.9 kg
Air outlet	22 mm male conical standard connector
Power Supplies
Mains supply	100 to 240 V AC
Extemal supply	24V DC, 12V adapter available
Operating Conditions
Recommended mask leakage	20 to 40 litres/min at 10 cm H2O
Minimum mask leakage	12 litres/min at 4 cm H2O

The company presents family of radiant warmers to meet the diverse thermo regulatory requirements of patient at your hospital. V-800 Open Care System is designed according to the most recent international standards and provides the neonate with an adequate and secure environment of its care. This compact and mobile Open Care System with integrated phototherapy system is a must for every well-run and busy hospital. The integrated halogen based Phototherapy system ensures that optimum therapeutic output is available on demand to manage the hyperbilirubinaemia without disturbing the infant. Features

• The controller is based on Microcomputerized system.
• Large bright displays are easy to monitor and for viewing from a distance.
• Double digital display system provided to measure the Infant temperature and to set the required temperature.
• Feather touch keys provided for easy operation.
• Bar graph LED system provided to indicate the heater output.
• Manual control system provided.
• Fault Indications with alarm for Baby probe failure, 1^oC temperature high, 1 ^oC temperature low, High temperature cut-off, Power failure

The Electronic Controller

• The controller is based on Microcomputerized system
• Large bright displays are easy to monitor and for viewing from a distance
• Double digital display system provided to measure the Infant temperature and to set the required temperatureFeather touch keys provided for easy operation
• Bar graph LED system provided to indicate the heater output
• Manual control system provided
• Fault Indications with alarm for
  • Baby probe failure
  • 1^oC temperature high
  • 1^oC temperature low
  • High temperature cut-off
  • Power failure

Baby Probe

• Baby probe is made of highly sensitive sensor and is interchangeable, field calibration taken care of by software. The probe is made up of silicon sheathed cable, which allows easy cleaning

Baby Tray

• The large baby tray is made of stainless steel frame with three side acrylic collapsible walls, trendelenburg & fowler system provided

Observation Lamp

• A halogen based observation light focus on any area on the bed

Heater

• Single element CE approved ceramic heater placed in a parabolic reflector

Other Facilities

• Provision of Oxygen cylinder
• I V stand provided
• Monitor tray provided

Physical Parameters Mattress

• Length :700 mm
• Width : 500 mm
• Thickness : 50 mm
• Working level from ground : 1020 mm
• Baby tray is tilt angle on either side : +/-8 max
• Weight Approx : :40 kg
• Castors : 100 mm with 2 brake wheels and 2 non - brake wheels

Recommended Environmental Specifications

• Operating temperature range : 20^oC to 33^oC
• Storage temperature range : -25^oC to 60^oC
• Operating humidity range : 0 - 100% RH

Skin Temperature Probe

• Range : 28^oC to 38^oC
• Accuracy : +/-0.2^oC within range
• Resolution : 1^oC
• Probe interchangeability : +/-0.2^oC (Servo)
• Heater output controllable from 0 to 100% in manual mode (continuously variable)

Phototherapy Unit

• Supply to each lamp : 12V, 50W
• Irradiance : 6 - 8 W /cm 2/nm at bed level

Observation Light

• Halogen based Power required : 12V, 50 W

Electrical Specifications

• Electrical Supply : 230V 10%, 50 Hz
• Power consumption with Heater at max. output : 750W

Power Consumption

• With heater, Phototherapy & observation lamps ON : 1250 W

Electrical Safety

• As per IEC 60601-1-2 for medical equipments

Note : Best results obtained if air convective current is low

The company is ranked amongst one of the major manufacturing and supplying units of LED type Phototherapy Units in India. Designed by experts, our LED type Phototherapy Units are widely used in phototherapy against neonatal jaundice. These LED type Phototherapy Units use high power LED (with the wavelength in the range of 420-490 nm peak at 465 nm). Our LED type Phototherapy Units are a better option than the conventional and CFL Phototherapy Units, as these have 2.5 times the luminance of a blue lamp. Additionally, we offer these LED type Phototherapy Units in varied specifications, in order to suit diverse requirements of the clients. Attributes

• Excellent quality
• Designed by professionals
• Reliable performance
• Longer functional life
• Low power consumption

Features

• Display exhibiting the total hours of treatment
• Display exhibiting the total hours of the bulb use
• High level of radiation in the middle and edges of the focused area
• Unit fixed on castors for easy mobility
• Adjustable and tiltable arm provided to focus the light at desired angle
• Phototherapy based on high technology of blue spectrum radiation source peak at 465 nm
• Microprocessor based LCD Timer to set the Irradiation time

The company has created a strong foothold in the business of manufacturing, importing and supplying Critical Care Ventilator. Designed to precision, the Critical Care Ventilators that we offer are very useful for critical care purposes at hospitals and nursing homes. These Critical Care Ventilators are widely known for excellent battery backup and reliable performance. Thus, are high on demand among the clients all over the medical industry. In addition to this, we offer the Critical Care Ventilators at most competitive prices in the markets. Why Prefer Our Critical Care Ventilator?

• Specially designed by professionals
• Excellent battery backup
• User-friendly controls
• Longer functional life

For more detail click here

The company has excelled in the business of manufacturing and supplying premium grade MAT Tourniquet. Designed by experts, the MAT Tourniquet that we offer provides usable features and real performance required for emergency blood-flow occlusion. Also, the MAT Tourniquet available with us offers the fastest and most powerful life and limb-saving arterial compression. Made available in varied specifications, our MAT Tourniquet is very affordable. Advantages Of MAT Tourniquet

• Fastest to Apply
• Most Effective Occlusion
• Easiest to Apply
• Safest to Apply

We offer High Flow Oxygen Therapy System. Precision flow oxygen therapy system is a high flow heat and humidification device for the non-invasive delivery of inspired gas flows from 1to 40 liters per minute. The technology delivers a perfect synchronization of flow temperature, humidity and oxygen percentage without discomfort via nasal cannula. Our high flow oxygen therapy system moves beyond conventional humidification giving the clinician the ability to manage the key factors in gas conditioning to achieve desired outcomes. Specially designed by experts, this high flow oxygen therapy system is very affordable and reliable at the same time. safety featuresprecise measurement of temperature and flowbuilt-in oxygen blender and oxygen sensordisposable patient circuitbattery backupkey componentsdisposable patient circuitpatient delivery tubevapor transfer cartridgeoxygen blendertechnical specificationsbuilt in oxygen blender. Oxygen percentage is fully adjustable from 21 to 100% when two 40 psi (276 kpa) gas source are used.internal battery backup maintains flow and oxygen percentage for 15 minutes if ac power is cut off. Battery recharge in 1 2 hrs.two alarm levels indicate low and medium priority alarm conditions. Iec60601 1 8 compliant.inlet gas pressure range is 4-70 psi (28-482 kpa). At low gas inlet pressures, maximum flow rate and oxygen percentage setting are automatically reduced to match the inlet pressure. Advantagesautomatically senses cartridge type maximum flow setting is automatically reduced if low flow cartridge is installed.all values and alarms displayed in a single large color coded fitting.easy connection between the delivery tube and disposable water path by a simple press and click fitting.no disinfection necessary. The patient circuit is detachable and disposable.temperature, flow and oxygen percentage are adjusted via a single setting control knob on the front panel.universal power requirements allow use anywhere with only a change of power cord.scheduled maintenance for internal components at 3 year intervals, external gas filters replaced at 6 month intervals, external oxygen sensor replaced annually.