Ideal Industrial Explosives Ltd

Tar Bund, Secunderabad, Telangana

We manufacture, export and supply Copper Electric Detonators. Designed with utmost precision, our Copper Electric Detonators comply with set industry standards. The Copper Electric Detonators are suitable for use in underground gassy mines and many other types of blasting. Our detonators offer a reliable means of controlled, simultaneous initiation of explosive charge. They are manufactured in No. 8 strength in copper shells. The copper shells are fitted with electrical fuse heads. PVC coated GI / copper leg wires are sleeved through a PVC plug and crimped to the detonator to ensure protection against moisture and water.

Shipping Information :

• As per Imdg (International Maritine Dangerous Goods) Classifications
• Class : 1, Division : 1.1, Group : B, Un No. : 0030, Page No. : 1257, Storage Catergory : II Type 'C'
• As per PESo (petroleum and explsieve safety organization) Classifications ID No. : 716, Class : 6, Division : 3, Categrory : ZZ

Precautions :

• Make sure that all connections are made with clean bare wire ends and if necessary freshly expose bare wire.

• Make sure that the bare ends do not come in contact with any conductors such as power lines, pipes, rails or other paths of stray current.

• Make sute that the shot-fiting cable is connected to the exploder just before fiting the shot and is immediately disconnected after the shot is fired. The exploder key must laways be in the possession of the blaster and not kept on the machine.

• Ensure that the exploder used is of adequare capacity and the current is of the desired magnitude for full initiation fo the round.

• Check the circuit for continuity before fiting the shots. This must be done using only "Blasters" ohm-meter.

We are instrumental in offering the best quality Super Relay in numerous specifications. The Super Relay is a non – electric surface delay equipment to provide delay between the holes and rows in detonating fuse initiated blast patterns. Our Super Relay features two holes on either end of the component to insert and tie the detonating fuse. This relay is bi-directional. Every Super Relay consists of two delay devices assembled in a plastic component. It is ideal for use in the blast for safe and reliable multi-directional blast designs. Super Relay can be used to provide delay initiation patters such as row delay, diagonal pattern, V-pattern etc.

Usage and Handling :

• Detonating fuse should be laid between the holes without much stackness.

• Cut the detonating fuse and insert the end into the hole provided for this purpose in the connector.

• Insert the other end of detonating fuse into the hole of the new super relay.

• Make sure that the detonating fuse ends do not fall on the middle of the relay.

• Make sure that the ends of the detonating fuse will not get wet once laid on the ground.

• Keep the relay close to the ground and to the hole as much as possible.

• The Circuit should be looped for dual advantage of blasting

Shipping Information :

• As per IMDG (International manitine dangeraus goods) classifications
• Class : 1, Division : 1.1, Group : B, un No. : 0029, Page No. : 1259, Storage category : II Type C
• As per Peso (Petroleum and explosives safety organiszation) Classifications
• ID No. 720, Class : 6, Division : 3, Category : ZZ

Petn Pentaerythritol Tetranitrate that we are offering is a white colored crystallite material, which is independently used as a high explosive, as the explosive core for detonating fuse (or) as an ingredient of composite explosives. Our Pentacrythritol Tetranitrate (Petn) crystals are short and hexagonal in appearance with minimum elongates and are free from needle shaped crystals, dust and visible impurities. We are a prominent Petn Pentaerythritol Tetranitrate Manufacturer, Exporter and Supplier from Telangana, India. We provide them in different packaging options to cater various industrial requirements.

Details :

• Common use of PETN is as an explosive with high brisance.

• It is more difficult to detonate than primary explosives, so dropping or igniting it will typically not cause an explosion (at atmospheric pressure it is difficult to ignite and burns relatively slowly), but is more sensitive to shock and friction than other secondary explosives such as TNT or TETRYL.

• Under certain conditions a deflagration no detonation transition can occur.

• It is rarely used alone, but primarily used in booster and bursting charges of small caliber ammunition, in upper charges of detonators in some land mines and shells, and as the explosive core of detonation cord.

• PETN is the least stable of the common military explosives, but can be stored without significant deterioration for longer than nitroglycerin or nitro-cellulose.

Shipping Information :

• As per Imdg (International Maritine dangerous goods) Classifications
• Class : 1, division : 1.1, group : D, Un No. : 0151, Page No. : 1106, storage category : II type B
• As per Peso (Petroleum and explosives safety organization) Classifications
• ID No. : 581, Class : 3, division : 2, Category : ZZ

Note :

• Special products / Sizes will be supplied to suit the customers requirements.
• Packing All Products are packed in approved fiber cases each containing 25 kg (net weight) of explosivs.

Storage Conditions : PETN is classified as an "Explosive" and must be stored in magazines on wooden platforms-rcapers.

Owing to our rich industrial experience and in-dept knowledge, we make available a superior quality range of Aluminum Super Plain Detonators. Our Super Plain Detonators consist of an Aluminum shell that is filled with PETN and ASA as secondary and primary charge. The spit of fire conveyed by the safety fuse is picked up by the primary charge which detonates the secondary charge for initiating high explosive charge. Thus, the product strength ensures complete initiation of cap sensitive emulsion / Slurry explosives. We are a renowned Aluminum Super Plain Detonators Manufacturer, Exporter and Supplier from Telangana, India. We make our Aluminum Super Plain Detonators in various sizes and specifications and can customize them as per the buyer’s requirements.

Applications : The super plain detonators along with safety fuse will be safe to handle at various hazardous locations like radio transmitters, high power cables, near heavy electrical machinery etc. They are more effective in dry holes. They can be used for boulder blasting, safe initiation of quarry blasting, and in open blast and non-gassy underground mines.

Precautions :

• Take care to ensure the end of safety fuse is free of any oil / moisture / grease contamination

• Use a sharp knife for cutting the safety fuse squarely. Rugged ends may cause diffculty in insertion.

• Ensure the crimping of safety fuse is near the open end of detonator

• Ensure the safe burning speed of safety fuse for a safe blast.

• Ensure to use adequate length of safety fuse so as to allow sufficient time for withdrawal to safety.

Shipping Information :

• As per Imdg (International maritine dangerous goods) Classifications
• Class : 1, Division : 1.1, Groups : B, Un No. : 0029, Page No. 1259, Storage category : II type c
• As per peso (petroleun and explasives safety Organization) classifications
• ID No. 718, Class : 6, division : 3, Category : ZZ

Our company holds expertise in offering precision engineered Super Coal Delay Detonators. We manufacture Super Coal Delay Detonators using sophisticated technology in compliance with the set industry standards. Our detonators are non-incendive in nature and have delay numbers zero to six (0 – 6) with a nominal time interval of 25 milliseconds between each successive delay number. The delay numbers are displayed on tags on the leg wire. The detonators are equipped with electrical fuse heads are fitted to the copper filled shells. All the shots can be connected in one series and fired in one round with a desired delay arrangement with our highly efficient Super Coal Delay Detonators. These detonators can be used for all types of blasting in underground gassy mines. They are well tested on various parameters to ensure optimum functionality and safety of use in Degree I/II gassy mines / Seams.

Capitalizing on our rich industrial experience and the proficiency of our certified individuals, we bring forth a premium range of Detonating Fuse. This flexible Fuse contains a uniform core – load of Petn. Our Detonating fuse is sensitive to friction, shock or impact. Also, it has high tensile strength which makes it compatible for cartridges of higher weights for open cast blasting. We are a renowned Detonating Fuse Manufacturer, Exporter and Supplier from Telangana, India. We make them available in available in 6.0 grams / meter, 7.5grams / meter and 10 grams / meter varieties.

Details :

• Petn is encased in various protective coverings, followed by an outer PVC coating.

• The PVC coating makes the fuse water resistant and withstands all external abuses.

Applications : It can be used in surface trunk lines, Secondary blasting and down lines in small diameter boles. For use in under water blasting, long hole blasting, places of high altitude, near high voltage transmission and all conditions in mining, construction and quarrying, special applications such as seismic prospeting, pre-sclitting and dimensions tool industry.

Shipping Information :

• As per IMDG (International Maritine Dangerous goods) classifications
• Class : 1, Division : 1.1, Group : D, Un No. : 0065, Page No : 1251, Storage category :O I
• As per PESO (Petroleum and explosives safety organiszation) classifications
• ID No. Power Cord – 7.5 : 466; Ideal Cord – 10: 467 ; power cord : 713, Class : 6, division : 2, category : ZZ

Note : Detonating fuse with higher core loads (le 10 grs, 40grs, 80 grs / mtr) will be supplied on customers requirements.

We are bracketed with the top most Cast Boosters Manufacturers, Exporters and Suppliers from Telangana, India. We offer premium Cast Boosters that can be for effectively initiating non-cap sensitive charges in a bore hole, at any predetermined point in a column of explosives charge. These boosters are high detonation pressure explosives and are sensitive to No. 6 detonator, No. 8 detonator and detonating fuse. Our Cast Boosters make efficient primer and booster that detonate at a very high velocity detonation and temperature.

Highlights :

• These qualities, together with high density produce good detonation that makes them efficient primers and boosters.

• They can used to prime the boreholes with Anfo cartridge explosives, bulk explosives.

• Each booster will have two through holes for easy insertion of detonating fuse or detonator.

• The booster can be stored for long period of time, as it contain no liquid ingredients and can be operated easily.

• Cast Boosters are available in 100grams, 250 grams, 400 grams and 500 grams.

• Cast Boosters contain no Nitro-Glycerin and therefore are less sensitive to shock and friction.

• Cast boosters have long storage life.

• Convenient to use and assembles no prickers are required.

• Cast boosters contain no headache causing ingredients.

Note :

• Special products / Sizes will be supplied to suit the customers requirements.
• All products are packed in approved fibre cases, each containing 25kg (net weight).

We are offering optimum grade Sorbitan Monooleate which is used as an emulsifier and stabilizer in numerous industries. It is accurately formulated using premium ingredients and chemical compounds that we procure from reliable vendors. Our Sorbitan Monooleate provides high performance and has long shelf life. We are a well-established Sorbitan Monooleate Manufacturer, Exporter and Supplier from Telangana, India. We provide them in industrial grade packaging and also at reasonable prices.

We are reputed as one of the most sought-after companies offering Consultancy in all aspects of Blast management. We have a team of certified and committed experts who first analyze the client’s challenges, define his exact needs, and then apply focused training of operating crew members and supervisors in the correct application of blasting methods for their specific situation. We render excellent Explosives, Initiating systems and services to construction, oil prospecting organization, water development agencies, departments etc. The explosives selection and explosives regulatory are in compliance with the defined standards of quality. Additionally, we are conversant with the Transportation of dangerous goods act and we provide consulting services for drilling, Blasting and mine development operations. We, as a Blast Consultant, make available high-value, low cost commercial explosives & accessories for clients in Telangana and its surroundings areas.

Our Blast Consulting Team :

• Our Blast Consulting team is a specialist consultancy unit dedicated to maximizing customer profit by optimizing blasting results.

• It offers an advanced and innovative blasting technology service – embracing design, measurement, analysis, problem shotting, training and the publishing of technical papers across the full spectrum of mining activity in India and beyond.

Due to the hazardous nature of Explosive materials, they require expert and critical care during their handling and transportation. We are one such reliable company to this Dangerous job. Our company has a well designed and dedicated approved fleet of trucks ranging from 1 Metric ton – 15 metric tons capacity for transporting all types of explosives, accessories to license locations and Govt. Approved respective magazines. For that un-interrupted and swift Dangerous Goods Transportation to our valuable buyers, we have a huge distribution network and 150 approved trucks. In addition, our fleet includes vehicles for transporting raw materials like ammonium nitrate in bulk capacity (up-to 50 Tons) to cater the production needs.

We are reputed as one of the leading Seismic Detonators Manufacturers, Exporters and Suppliers from Telangana, India. Maximizing on our ultra-modern infrastructure and the proficiency of our experts, we offer a high performance range of Seismic Instantaneous Electric Detonators. They are supplied in No. l 8 strength with 23 SWG copper lead wires. Our Seismic electric Detonators consists of an aluminum tube closed a tone end and to the other end are attached the lead wires. Packing quantity per case varies depending upon the length of lead wire. Seismic detonators are packed in wooden cases and are provided at affordable prices.

Details :

• These detonators have a specially developed fuse head designed to go off within one milli-second of the current application.

• The fuse head is protected by a special anti-static sleeve.

• Seismic instantaneous electric detonators being fast action detonators are capable of with standing high hydrostatic pressure; meets the critical needs for seismic prospecting and therefore is specially developed for seismic exploration on land or offshore.