Navi Mumbai, Maharashtra, India
Our Products
At Icelings we offer a wide range of concrete cooling solutions for the construction industry. In construction of dams, tunnels, bridges, and sewage plants etc; it is of utmost importance that temperature of the green concrete is controlled so that these buildings can withstand tensions that are created in finished concrete structure. Excessive internal heat-up of the green concrete especially in hot climates has to be avoided in order to prevent cracks and maintain proper strength, ensure consistent quality, and eliminate cracks.
On mixing cement used in concrete with water heat is liberated which is known as the heat of hydration formed by the exothermic chemical reaction between cement and water. This heat of hydration raises the temperature during the curing process by up to 25 causing an increase of volume. After the curing the concrete cools down again reducing its volume and thus naturally causing cracks eventually. Therefore the initial pouring temperature should be lowered so much that the maximum temperature during the curing process does not exceed a certain temperature determined by the consultants.
ICELINGS is the largest manufacturer of packaged, hygienic tube ice for Mumbai and Navi Mumbai markets. ICELINGS supplies tube ice from Indias largest, 250 ton per day plant, to restaurants, chemical and dyes manufacturers as well as meat and seafood industries.
Todays fishing industry grows more competitive with every catch. Distances become greater. Quality demands increase. To not only survive, but to maximise profits, it is essential to utilize the best technology and finest equipment available. Whether it is a small boat or a large fishing vessel, Icelings has the latest technology backed by our own experience in the fishing industry, to provide Refrigerated Sea Water Systems-RSWs systems that are custom designed and built according to customers requirements. Icelings has designed and installed Refrigerated Sea Water Systems for a large number of fishing vessels in India. At Icelings we provide the best quality equipment, which can survive the harshness of marine environment. We know how to help fishermen get their catch to market with the highest quality and profit.
The ICELINGS tube ice maker discharges ice every 20 minutes. A tube ice plant of 20 ton per day capacity will produce 280 kg of ice every 20 minutes. Which means, every hour, it will produce 840 kg of tube ice. Depending on the process demand, industrial ice users may require tube ice in batches of approximately 10 tons in one hour or 10 tons in 20 min. In such conditions, they have to store the ice. Also areas where power is inexpensive at night, it is profitable to make ice at night and store it for the usage during the day.
| Sr No | Model | Vertical Form/Fill/Seal Machine Model PK-L (Upto 2.5 Kg) | Vertical Form/Fill/Seal Machine Model PK-XL (10 Kg) |
|---|---|---|---|
| 1 | FILLING WEIGHT | 500gms, 1Kg & 2.5Kg | 10 Kg |
| 2 | POUCH TYPE | C Pillow type pouches having centre seal and fin seal. | C Pillow type pouches having centre seal and fin seal. |
| 3 | MAX. POUCH SIZE | 350mm (W) x 500mm (Ht) | 400mm (W) x 660mm (Ht) |
| 4 | PACKAGING | Virgin Films like LDPE MATERIAL (Max. Roll Width : 720mm) | Virgin Films like LDPE MATERIAL (Max. Roll Width : 830mm) |
| 5 | OUTPUT | For 500gms & 1Kg filling weight– Speed: 17 - 19 pouches/minute. For 2.5Kg filling weight Speed: 8 - 10 pouches/minute |
10kg filling weight -Speed: 3-4 pouches/minute. |
| Note:(Speed depends on pouch size, Flow ability, Uniform product size, Moisture Content & Bulk Density of the product and type of the film)
Subject to the following:-
|
|||
| 6 | WEIGHT ACCURACY | For 500gms, +/- 75gms For 1Kg, +/- 150gms For 2.5Kg, +/- 175gms |
For 10kg +/-500gms |
|
|||
| 8 | MACHINE CONSTRUCTION | Complete machine construction is of M.S All product contact parts are of S.S.316. | Complete machine construction is of M.S All product contact parts are of S.S.316. |
| 9 | SEALING METHOD | Impulse Sealing/ Thermoweld Sealing–Virgin Films (Customer to decide the alternative) | Impulse Sealing/ Thermoweld Sealing–Virgin Films (Customer to decide the alternative) |
| 10 | CHANGE PARTS | Change Parts needed for different grammages/sizes. | Change Parts needed for different grammages/sizes. |
| 11 | ELECTRICALS | 440/230V, 3 Phase, 50 Hz, AC. | 440/230V, 3 Phase, 50 Hz, AC. |
| In case of abnormal fluctuations in voltage and/or frequency, we recommend that you install a voltage stabilizer to feed constant voltage to the machine. | |||
| 12 | POWER REQUIRED | 3.0 KW | 5.7 KW |
| 13 | COMPRESSED AIR REQUIREMENT | Model no.: CPM7D/10-200 Type: Tank Mounted Screw Compressor Refrigerated Dryer: With Dryer Capacity (fad) [ cfm ]: 21.2 cfm Max working press [barg]: 10 Motor rating [ hp ]: 7.5 Air Receiver: 200 Ltrs Accessories Set of Filters: 1 Micron & 0.01 ppm |
Model no.: CPM7D/10-200 Type: Tank Mounted Screw Compressor Refrigerated Dryer: With Dryer Capacity (fad) [ cfm ]: 21.2 cfm Max working press [barg]: 10 Motor rating [ hp ]: 7.5 Air Receiver: 200 Ltrs Accessories Set of Filters: 1 Micron & 0.01 ppm |
| 14 | CONTROLS | Machine is controlled through PLC (Programmed Logic Controller) - Mitsubishi Make | Machine is controlled through PLC (Programmed Logic Controller) - Mitsubishi Make |
| 15 | TESTING MATERIAL | In case of an order, we request you to send us 2 rolls of packaging material and 50 Kg Of the product for testing to our works, 4 weeks prior to the despatch date. | In case of an order, we request you to send us 2 rolls of packaging material and 50 Kg Of the product for testing to our works, 4 weeks prior to the despatch date. |
Shell and tube condensers are currently the most popular type of condensers used worldwide. Icelings tube ice plants are supplied with shell and tube condensers. We can also supply tube ice plant with Plate Heat Exchanger- PHE or Evaporative Condenser.
PLUGnCHILL is a next generation technology product fom TESSOL for cold chain application. It eliminates the use of diesel for reefer and insulated cabins. This reduces operating costs in transport refrigeration and cold stores by 60%. The added advantage is that this system ensures necessary temperature for refrigerated transportation of products/produce according to its specific temperature requirement.The temperature inside the insulated cabin is usually maintained for 18 24 hrs during point to point transport. maximum charging time is up to 6 hours.Unlike conventional systems, being completely decoupled from the vehicle engine, it has no adverse impact on the maintenence costs of the vehicle and eliminates any issues of midway engine failures. Therefore once stored in a charged vehicle, your goods are definately safe.
The Live Bottom Bin is ideally suitable to store tube ice up to 20 Ton and has a unique design with the first in-first out principle. Means, ice which enters the bin first will be discharged first.
Bulk industrial tube ice users prefer an automated system of tube ice delivery - from ice maker discharge to ice storage as well as feeding the tube ice to process from the ice storage. ICELINGS offers complete solution for the automatic tube ice making, storage and delivery.
Tube ice can be stored and delivered to the final point of consumption from the ice stored in Rake System or Live Bottom Bin. Both the systems should be housed within an insulated cabin to prevent the ice from melting. ICELINGS offers PUF insulated ice storage cabin.
