IBPGAS Engineers

Jundla, Karnal, Haryana

We are manufacturer of Propane above ground as well as mounded and underground storage tanks of various capacities ranging from 500 Liters to 1000000 Liters.

Industries : Storage tanks can be found are: petroleum producing and refining, petrochemical and chemical manufacturing, bulk storage and transfer operations, other industries consuming or producing liquids and vapors.

Accessories:

• The tanks are provided with all accessories like safety fittings, valves, pipelines etc.
• The Unit Comes With All Safety Features As Per Norms.
• Above Ground Propane Storage Tank Installations
• Bulk Propane Installation can be Designed, Supplied, Installed and Commissioned on turnkey basis In Accordance to Explosive Norms / Local Statutory Requirements.

We IBP Gas Engineers Provides a variety of quality tanks and equipment including Aboveground, Underground, and Vertical Propane tanks.  We also manufacture Propane above ground as well as mounded and underground Propane storage tanks of various capacities ranging from 500 Liters to 1000000 Liters.  We undertake Export of propane storage tanks including competitive prices, reliable delivery, and friendly service of our team of experienced technicians, drivers, and knowledgeable customer support staff. The unit comes with all safety features as per norms. The tanks are provided with all accessories like safety fittings, valves, pipelines etc.

We manufacture the following types of Propane tanks:

Propane Storage Tanks

Horizontal Propane Tanks

Vertical Propane Tanks

Storage Propane Tanks

Propane Transport tanks

Propane storage bullets 

Propane bullet 

Propane mounded bullets 

Propane sphere

Propane spherical tanks

Propane Bulk storage tanks: upto 120000 Gallons

Propane Underground Storage tanks: 500 to 500, 000 Gallon

LPG and Propane Dispensers: 200 to 6000 Gallon

We are exporters and manufacturer of Propane Tanks. We also supply Propane storage tank, propane transport tanks at cheap cost. Propane Tank Volumes are from 0.5m3 to 5000m3 with Refrigerated tank for Propane storage. Propane storage tanks are used as a storage base for heating and technological purposes as well as technological tanks in the area of bases, storages and liquid gas bottling plants.

Location and Spacing :

The distance given in Tables 1, 2, and 3 below indicate the minimum approved distances from above- ground / underground tanks and refer to the horizontal distances between the nearest point on the propane storage tank and a specified feature, e.g. an adjacent storage tank, building or boundary. The distances apply to both spherical and cylindrical tanks.

Documentation :

The tanks are manufactured according to our own documentation or on the basis of documentation supplied by the customer - types of materials and fittings used depend on tank capacity and its application. Tanks are manufactured from carbon steel plates, coated with high quality, modern, eco-friendly and anticorrosion coating, covered by a quality and durability warranty.

Storage and Handling :

Storage and Handling of Propane Gas standard sets out for storage, handling and transfer of propane, LPG, LP And other Gases.

This Applied to :

Workplaces where propane, LP Gas stored or transferred as bulk plants, dispenser unit, commercial and industrial, installation.

Specification :

Relief venting, Piping, supporting structures, Installation of above ground and underground storage tanks and qualification of personnel

Technical Specification :

We use Design pressure, temperature, volume and Design code for propane storage tanks is as bellow:

Design Pressure : 17.16 Bar to 23 Bar

Design Temperature : -40 Deg C to + 65 Deg C

Volume : 0.5M3 to 1000M3

Design Code :

ASME Sec. VIII Div.1,

ASME Sec. VIII Div.2 

BS 5500 codes,  

CODAP 2000

PD 5500: 

Material of construction : 

BS 1501-1 225 490 A, EN 10028-3 P355NL2, SA 537 CL 1, SA 516 GR 70, AND OTHERS

Fittings and Design Specifications :

• Excess flow valves should be fitted to prevent the loss of Propane Gas from storage tanks and   transport tanks, and especially to protect points where flexible hoses are used.
• Remote controlled hydraulically operated shut-off valves should be fitted to each storage tank.
• Tanks for the storage of Propane Gas shall be designed for a working pressure corresponding to the vapour pressure at the highest temperature that the tanks are likely to reach.
• Each storage tank should be fitted with a pressure gauge and devices for measuring the liquid content and its temperature. The maximum quantity of Propane Gas filled into anyone tank should be such that at the maximum operating temperature it would not occupy more than 95% of the capacity of the storage tank.

Supported by a team of experienced professionals, we have been able to manufacture and supply Oil Tanks. Engineered to perfection, these tanks are made using superior-grade raw materials that are obtained from reliable vendors of the industry. Keeping in mind the requirements of customers, we are providing these tanks in different specifications.

Features:

• Sturdy construction
• High load bearing capacity
• Less maintenance

Specifications : Capacity Range - 1 M 3 To 500 M 3

Technical Specification:

• GRADE 202, 304 & 316 (SS)
• MS 2062
• MILD STEEL/ CARBON STEEL/ STAINLESS STEEL
• THICKNESS - As per requirement by the customer.

We have hired dedicated professionals for checking the quality of the products against various parameters. As a trusted name, we always make sure that our products are properly packed and remain free from damage during transit. For this, we have hired an adroit team of experts having immense experience in packaging.

Design Aspects:

• The Dimensions (diameter & length) of the vessel shall be decided based on the site conditions, soil mechanics & type of fabrication facilities available.
• The External surface of the Vessels, which is covered by mound should be protected from corrosion.
• By Provision of external surface coating
• By Cathodic protection (Impressed current system)
• For mounded bullet used for refinery service, due to presence of caustic environment & H2S, the internal portion of vessel should be coated with suitable anticorrosive coating.

We manufacture LPG Spherical Storage Tanks (Horton spheres) of diameter ranging from 10000 mm to 22000 mm & thickness upto 72mm, as well as Refrigerated spheres for Butadiene & Ammonia storage. The spheres are designed as per ASME Sec.VIII Div.1, Div, 2 and BS 5500 codes. We have executed storage facility including Civil, Mechanical, Piping, Electrical and Instrumentation.