Other Products / Services #6601658

OMS LaserPoint LP01 Laser Vibrometer

The OMS LaserPoint LP01 Vibrometer is based on a patented electro-optical configuration. The system consists of two components, an optical head and an electronic controller, which are connected by a cable.

The optical head contains a near-infrared laser diode with a built-in high speed photo-detector, an acousto-optic modulator, and a red laser diode to aid in aiming the beam. The controller contains a demodulator, a signal strength indicator, two selectable velocity ranges, and an array of low pass filter options.

Technical Specifications

- Velocity Range : 5 m/s to 800 mm/s ¹

- Vibration Frequency Range : 0.01 Hz to 20 kHz ²

- Working Distance : 1 cm to 5 m

- Displacement Range : 0.04 nm (at 20 kHz) to 120 mm (at 1 Hz)

- Optics : Collimated (No Focusing Needed)

- Surface Reflectivity : Realistic Surfaces

- Signal Output : Analog Velocity and 10.7 MHz FM Outputs

- Dimensions :

Laser Head: 24 x 11.4 x 7.6 cm

Electronic Controller : 30 x 22 x 6 cm

- Weight

Laser Head: 1.4 kg

as one of the leading entity of this domain, we are engrossed in providing supreme quality marinediesel engine analyzer. this system is equipped with diesel detector. It is made compatible with various software packages available integrated pc for mobile usage. The offered system is manufactured by our ingenious professionals using the finest quality aluminum with the aid of pioneering techniques at our vendor end. Also, this system is extensively demanded to use in several industrial operations.
features:

• high durability
• weather resistance
• easy to operate

specifications:

• dk-20 single-channel compact portable system for full cylinder pressure analysis and automatic diagnostic
• dk-20/fv dual simultaneous channel compact portable system for cylinder pressure plus fuel pressure analysis and automatic diagnostic
• dk-100 multichannel portable system for simultaneous data collection and real-timeanalysis diagnostic & observationof corrective actions.
• dk-200 on-line systems provide continuous monitoring of engines up to 30 cylinders
• up to eight engines can be monitored on one vessel and linked to an onboard pc running that runs the online software

HAV Meter Starter System can collect data from the base station which is then analysed and reports generated covering the tool usage, an employees vibration exposure levels. The Toolminder software can also be used to track tools, asset management, task management and employee shift durations. Since the introduction of the Control of Vibration at Work Regulations (2005) it has become essential for all companies to ensure their workers are not exposed to dangerous levels of vibration. The HAV meter system is ideal for any company who needs to comply with the Control of Vibration at Work Regulations (2005)
Specifications:

• 8x HAV meter (with Rubber Boot)
• 1x Base Station
• 8x Tool Tags
• 10x Swipe Cards
• 1x Installation Kit
• 1x Toolminder Software

Medium Acoustic Camera with Holography and Beamforming - Bionic M112 Array

Noise plays an increasingly important role in environment, so understanding noise reduction is a critical factor during research, development and operation. Accurate tools are necessary to locate and evaluate the noise. iAdept Marketing is here, for providing solutions for noise reduction using different techniques in India.

AnAcoustic Cameraor Noise Inspectoris an imaging device used to locate sound sources and to characterize them. It is a real time noise analysis camera which consists of a group of microphones also calledmicrophone array that are simultaneously acquired to form a representation of the location of sound sources.Acoustic Cameragenerally consists of a microphone array and an optical camera.Acoustic Cameracan extend the time and frequency selectivity and add a location selective component. With this method the sound signal is shown and also a sequence ofacoustic imagescan be acquired asacoustic videosare generated at same time.Acoustic Cameracomprises traditional analysis methods as well, likeA-weighting, 1/3 octaveband andnarrow band analysis. WithAcoustic Camerait can be precisely analyzed that when, where and whichpart is emitting soundi.e.' Noise Source Localization '.

The VSHOOTER VBS1T is much more than a innovation in the field of the vibrometers, it is a totaly new concept, a new way to do vibration monitoring and analysis. This new modern concept consists of creating automaticaly Machine Condition Pictures ( MCP) which can be saved and uploaded to a PC into a report with detailed vibration datas and trending curves. With a MCP you see immediatly the machine condition. After having done the second MCP on the same machine youll be able to follow the machine condition evolution on a trending curve.

Take a photo, do the measurements and get the MCP (Machine Condition Picture) to see the machine condition, if maintenance needed at a glance. Quick, easy to use, with automatic auto diagnosis system for beginners and experts.

The VSHOOTER is a comprehensive diagnostic tool a vibrometer that allows to know and to easily track the status of the more common rotating machines such as fans, pumps, screw compressors etc

The VSHOOTER VBS1T produces the MCP. The VSHOOTER VBS1T is a portable measuring device, a vibrometer equiped with an external high quality accelerometer, an embedded camera, led stroboscope and pyrometer. A special software has been developped to get photos enhanced with informations. On every MCP appear the measuring points locations. The points appear in green, yellow, orange or red according to the classification of ISO 10816-3 7

VibAnalyst ^TM is a Complete Vibration Analysis Software conceived with a vision to break the conventional one Software one Hardware format. This is the First Machine Condition Monitoring Software to be Conceptualized and developed in INDIA. Coined by team comprising of engineering experts from Condition Monitoring industry and skilled software developers.

VibAnalyst^TM has a unique capability of interacting with multiple Vibration Data Collectors and Analyzers. Many high-on-demand Vibration Data Collector and Analyzers are already compatible with VibAnalyst^TM and more names are being added to this ever-expanding list.

Key Features of VibAnalyst^TM

• Alarms at a glance for whole Plant
• Overall Display at each level
• Helps to identify defective machines
• Common Display for all graphs
• Facility to expand each one
• Display route and graph simultaneously
• Auto Diagnostic tool for machine
• Multiple units and Parameter conversions
• Trend, Waterfall, Octave, Cestrum and order tracking display
• Time based report generation
• Approximated 50 report templates
• Export report in multiple formats

fft vibrometer - 107i is a compact, ip65, handheld, microprocessor based vibration-measuring instrument designed to measure vibration parameters of the rotating machine according to iso 10816, as well as other international standards which have been set on the same level - vibration acceleration, rms vibration velocity, vibration displacement and vibration spectrum analysis in fft. It allows to measure the dynamic signals followed up by the record it into the non-volatile memory, as well overview and analyze the spectrum.

universal vibration meter that measurement of velocity, acceleration, displacement. Fft spectrum up to 800 lines resolution.

display of true rms, peak acceleration, and peak-to-peak displacement values.

frequency range 2hz to 10khz, hpf (high pass filter) 2 or 10hz, lpf (low pass filter) between 100hz to 10khz (step - 100hz, 1khz).

rechargable battery save to trouble of battery replacement and money.

automatic shut-off conserves battery power.

save 2mb measured data and print record via usb cable and data management with window base pc software.

using the shock pulse technique, bearing condition tester measures the condition of all ball and roller bearings elements of any sizes.

S909Z-6 Multi Parameter Machine Condition Checker, bearing parameter (acceleration envelope) IR temperature measuring One button control power, parameter selection, ISO10816 group selection, measurement and holding. With remote switch and magnet base to avoid handheld problem to get reliable and consistent data. Measuring vibration velocity, displacement acceleration envelope to check machine/bearing health with yellow/red/green LED indicator Build-in ISO10816-2 -3 groups selectable 4 digital LCD display Optional magnet base and remote switch Sensor included, Easy to use. Automatic power off. Metal case, Robust, Reliable Both Metric English Unit

Acoustic Camera -Sound Analyser (Bionic XS-56 Array)

An Acoustic Camera or Noise Inspector is an imaging device used to locate sound sources and to characterize them. It is a real time noise analysis camera which consists of a group of microphones also called microphone array that are simultaneously acquired to form a representation of the location of sound sources. Acoustic Camera generally consists of a microphone array and an optical camera. Acoustic Camera can extend the time and frequency selectivity and add a location selective component. With this method the sound signal is shown and also a sequence of acoustic images can be acquired as acoustic videos are generated at same time. Acoustic Camera comprises traditional analysis methods as well, like A-weighting, 1/3 octave band and narrow band analysis. With Acoustic Camera it can be precisely analyzed that when, where and which part is emitting sound i.e. ' Noise Source Localization '.

A range of applications like measurements of a washing machine, a motorcycle, a hydraulic pump, a PC, a car and etc.

OMS Laser Scanning Vibrometer LS01

The OMS LaserScan LS01 scanning vibrometer is based on a patented electro-optical configuration developed by MetroLaser. The system consists of a portable laser sensor head and electronic controller. The laser sensor head includes a laser, frequency modulator, photo-detector, color CCD camera, and two computer-controlled scanning mirrors. The electronic controller has both a demodulated velocity output and a 10.7 MHz frequency modulated signal output. The front of the controller has a signal strength indicator, two selectable velocity ranges and an array of low pass filter options. A comprehensive software package, including modal analysis, is available. The software registers the user-selected target, controls the mirrors, performs dithering if needed, collects and analyses data, and displays 2D and 3D animations.

Fieldpaq II is an advanced 4 Channel noise and vibration analyzer for condition Monitoring. It has different features like:

• FFT analysis
• Orbit
• Balancing
• Long Time RecorderV
• Vibration Meter

Specifications

• 4 channel real-time analyser
• IP 65 rating
• 5-inch color (800 x 480 high resolution)touch screen
• 24 bit sigma delta AD converters to provide a high dynamic range
• Up to 40 kHz maximum bandwidth
• Powered by a 800 MHz CPU for running the Windows CE system and the fastest commercially available DSP chip TI TMS320C6713B for performing signal analysis at extremely fast real-time rates.

We provide Wireless Machine Condition Monitoring Service or Remote Vibration Condition Monitoring Using Cloud Technology.

Unique Features:

• Automated detection of mechanical and electrical condition
• Automated monitoring of failure growth
• Automated diagnostics of failure root causes
• Automated prediction of time to failure

Technology:

• Performs continuous monitoring based on the automated on-line analysis of electrical motor parameters currents, voltages, phase angle together with
• Automatic signal processing of vibration signals and control data retrieved from PI, SCADA, DCS

Maintenance:

• Bottom Line:
• Zero unexpected equipment failures
• Greatly improved planning and scheduling
• Reduced operation losses
• Reduced spare parts inventory
• PSE's technology platform provides industry with the ability to monitor and analyzed vast amounts of data and provide information critical to operations management. (Ware)

Diagnostic:

• An analytical cloud based software framework which provides the tools for the development of applications for diversified smart objects and automatic remote internet enabled intelligent monitoring of smart objects deployed worldwide. (eReporter)

PSE's:

• A software package with features of artificial intelligence, which presents to the client via their internet website. (eExpert)
• A software package facilitating the remote interaction with an expert or by the user.

STD-510 Data Collector is used for monitoring and analysis of rotary machine conditions. Thanks to pocket size and light weight, functional and easy-to-operate design, STD-510 is an ideal tool for daily vibration monitoring of industrial equipment.

Highlights:

• Using external sensor with magnetic holder enables you to collect broad-band data more accurately and reliable
• Data acquisition and storage: up to 500 waveforms
• USB port to transfer data to computer, upload routes and download data for in-depth analysis with The Vibrodesigner Analysis Software
• On-site FFT analysis
• Tacho input
• Explosion proof ExibllBT3

On-site analysis:

• Cursor and coordinates
• In-band values
• Various measurement modes
• Zooming

Microcontroller-based Condition Monitoring System (MTN 5000)

The MTN 5000 features a 3.5 inch TFT touchscreen with an easy-to-navigate menu that enables users to set data sampling periods, alarm threshold levels and delay times on a channel-by-channel basis or across all channels. The system will accept voltage or 4-20mA inputs and can be used to monitor many different types of sensor. AC outputs are available via door-mounted BNCs for easy analysis. Modbus and remote PC monitoring available as options.

entry level laser shift alignment

• easy and precise shaft alignment
• transducers with built-in bluetooth and rechargeable batteries
• large 25mm detectors
• distance between transducers on s and m machines up to 3m
• extra light wireless transducers weigh just 125g the lightest of their kind in the world
• electronic inclinometers allow for convenient measurement in any shaft position.
• a rich set of options including horizontal and vertical machine alignment, direct pdf reports etc.
• high capacity flash drive for measurements and reports storage, usb interface with pc
• conspect freeware for measurements archiving and reports generating
• control display

The TPI Model 9041 Ultra II represents the very latest in easy to use high specification maintenance tools, offering extremely high levels of functionality and capability at a very affordable price!

As a high spec condition based monitoring (CBM) data collector and Dynamic 2 plane rotor balancer designed for plant and asset inspections, the Ultra II does it all.

• Automatically detects out of balance, misalignment, looseness and bearing defects
• Predictive analysis capabilities that accurately calculate time frame to failure
• Condition based monitoring analyses bearing wear and gear degradation
• Built-in single plane balancing enables correction of the most common cause of vibration. (Dual plane balancing with additional accelerometer)
• Additional features include Inspection, Lube and remote/server database
• User selectable defined envelope filters and demodulation functionality
• True simultaneous 3 channel capture
• High resolution (0.2Hz) frequency spectra from 2Hz to 10kHz
• Rugged fully waterproof construction meets IP68 and MIL-STD-810F requirements
• Includes C-Trend powerful and easy to use asset management and fault diagnosis software

Model 9041 Ultra II C-Trend II Software Functionality

Condition Based Maintenance data collector:

• Displays sites, assets and measurements in a tree structure to give easy navigation of routes and capture of readings using touch screen and numeric keypad.
• Analyses and displays ISO vibration levels, bearing wear, unbalance, misalignment, looseness etc.
• Color coded with alarm status (red, amber green).
• Fully zoom-able frequency spectrum and time waveforms
• All data automatically downloaded to C-Trend (PC trending analysis and reporting software included as standard)
• Optional auto identification of measurement points using RFID tags with easy to use set up wizards

Single plane and two plane dynamic balancer:

• Single and two plane software included, you need an additional accelerometer A9012 for two plane balancer
• Balances to user defined grades using simple to use step by step balancing wizard
• Live vector display shows out of balance and phase angle during balancing runs (ideal for checking stability)
• Built-in tool kit for trial weight calculation, weight splitter, drill depth (for weight removal), coast down etc.
• Downloads all balance data and graphs to PC full color report generator wizard

Inspection system:

• User defined inspections can be run to capture data and trend process variables (e.g. temperature, pressure, run hours etc.) using simple wizards
• Automatic reporting and generation of email alerts for any parameter

Universal Vibration Monitor

Vibration level display for connection to M12 current loop output, viewing area: 47 mm x 18 mm, with LED back lighting, supplied with bezel for panel mounting

BNC Interface 802:

BNC module with DIN rail attachment to connect the M12 outputs

Application

• Monitoring of vibration velocity (severity) of rotating machinery to ISO 10816-1 and reciprocating engines to ISO 10816-6.
• Monitoring of bearing vibration, for instance by means of RMS values, crest factor or Diagnosis Coefficient DK(t)
• Emergency shut-off or alarm tripping in case of increasing vibration
• Typical machines to be monitored are pumps, compressors, centrifuges, ventilators, mills, and mixers
• Sound level monitoring using IEPE compatible microphones
• Production quality control

Properties

• Extremely flexible
• Monitoring of vibration acceleration, velocity and displacement
• True RMS and true peak-to-peak measurement
• 3 measuring ranges
• Plug-in high pass and low pass filter modules
• Relay output with adjustable threshold