Impaq Elite is a portable 4 channel real-time analyzer that is built for advanced noise and vibration analysis in the field. Unique features like dual injection molding and protective sealing provide for IP 65 rating for measurement in harsh environments.Impaq Elite is equipped with a large 6.4 inch color VGA(640 x 480) high resolution touch screen.The combination of Microsofts powerful WinCE operating system and touch screen operation make it very easy and intuitive to use.

• 6.4 VGA color touch screen (640 x 480)
• IP 65 rated, rugged housing made by dual material injection
• Compact flash card for unlimited data storage
• TI 6713 DSP for high speed real-time processing
• Powered by Microsoft WinCE system
• USB interface for convenient PC interface
• High capacity lithium-ion battery
• Optional analysis software modules
• FFT spectrum analysis
• Route based data collection
• Computed order tracking analysis
• Octave spectrum analysis
• Multi-plane rotor balancing
• Raw data recording

Special Purpose Accelerometer

Special Purpose Sensors extend the range of vibration analysis and monitoring tasks that can be undertaken by modifying the design or sensor type. Thus, models can be selected that can:

• Work at more elevated temperatures
• Work at lower frequencies
• Measure different vibration parameters
• Permit simultaneous measurement of temperature
• Permit more than one vibration parameter to be measured simultaneously by the same sensor

This vibration meter allows you to conduct vibration analysis at the touch of a button. The economical and easy-to-use meter displays color coded alarm levels for ISO values and bearing damage (BDU) on the full color OLED display; green (good), yellow (caution), and red (stop).Easily identify, bearing, balance, and alignment problems

• ISO built-in alarms
• Easily identify bearing problems with BDU reading
• Built in band filters detect equipment problems:
• 1X (unbalance), 2X (misalignment), 3X (looseness)
• View complex issues with the 800-line spectrum with zoom and cursor
• Ruggedized IP67 design
• Trend data with included C-trend Lite software
• Standard cable mounded accelerometer with magnet
• Built in Bluetooth communication capability
• USB docking station to download to a PC
• Easily collect and store data

We are offering a wide range of Vpod Vibration Meter to our valuable cleints. In addition, clients can get the Vpod Vibration Meter from us at industry leading rates. The vPod ll can download a pre-defined measurement route for mass data collection. The built-in review mode of the vPod ll shows the stored data. The patented G-Spike enables you to quickly connect to the detection probe.

Features:

• SMD (surface mount) production
• Battery charge indicator
• Input bias indicator
• Backlit, high resolution LCD display
• Average, peak hold and freeze modes
• Selectable gain

Specifications:

• Memory for storing up to 1, 000 data
• Review data mode
• RS-232C interface
• Route-Based collection

ApplicationMachine condition monitoring to ISO 10816-1 / -6 etc.Roller bearing monitoring to VDI 3832 etc.General vibration measurement in laboratory and industryQuality controlOptical rotation speed measurementNon-contact temperature measurementPropertiesMeasurement of vibration acceleration, velocity and displacementDisplay of true RMS, peak value and crest factorExternal precision shear type accelerometer with magnetic base, built-in infrared thermometer and non-contact optical rpm sensor with laser pointerAutomatic detection of measuring points via the sensor base with electronic VMID measuring pointsGraphical trend displaySpectral analysis for acceleration and velocityMemory for 16000 measurements, USB interfacePC software for measuring point management to MIMOSA convention(ISO 13373-1) and measuring data archivingHeadphone outputSimple operation - no training requiredEngilsh, German, French, Spanish, Italian and Dutch language supportBrilliant, power-saving colored OLED displayPocket-sized with economic AAA batteries or accumulators

Specifications

• Displacement, velocity, acceleration measurements and spectrum analysis
• Frequency and time domain measurements, enveloping detector
• Balancing program up to 8 planes, up to 14 points
• Laser alignment advanced horizontal, vertical mechanism alignment
• On site express rolling bearings tester
• Standard file system FAT16, use of standard SD (or mini, micro SD) card provide up to 1GB memory for data storage
• Standard file system provide user defined folders structure and time and date stamped data files
• and much more.

Standard Features

• Displacement, velocity, acceleration measurements and spectrum analysis
• Frequency and time domain measurements, enveloping detector
• Balancing program up to 8 planes, up to 14 points
• Laser alignment advanced horizontal, vertical mechanism alignment
• On site express rolling bearings tester
• Standard file system FAT16, use of standard SD (or mini, micro SD) card provide up to 1GB memory for data storage
• Standard file system provide user defined folders structure and time and date stamped data files
• Firmware - upgradeable by user
• Wide temperature range graphical LCD (Liquid Crystal Display) with 160 x 160 pixels and white LED backlight

Features

• Tri-axial Hand Arm vibration Measurements
• Large Dynamic Range
• Re-chargeable Battery Pack & Charger
• Fully compliant with ISO 8041 : 2005
• Large Colour Display
• Large Flash memory
• Rugged Accelerometer and Cable for industry
• Only 3 operational buttons for simple use

Applications

Hand Arm Vibration to ISO 5349 : 2001

Features:

• Measuring vibration velocity, displacement and acceleration.
• Small size, transducer included, battery powered, no other component required.
• Optional for inner or external Accelerometer.
• One button control both power and measurement.

Specifications:

• 3 1/2 LCD digital display, sampling per second.
• Suitable for monitoring machinery vibration caused by out-of-balance, misalignment, geardamage, bearing faults and etc.
• Amplitude Ranges:Displacement: 1-1999 m (or 200 mil)
• Peak to peak Velocity: 0.1-199.9 mm/s (or 20 in/s)
• True RMS Acceleration: 0.1-199.9 m/s2 (or 20 g) Peak
• Overall accuracy: +5%
• Temperature range: 0 - 50 0C
• Displacement: 10-500Hz
• Velocity: 10-1000Hz
• Acceleration: 10-1000Hz(Inner accelerometer 908B)10-10000Hz (Depending on external accelerometer model)
• Battery: 9V

vibration transmissibility measuring tool

vibration transmissibility is an app that measures in real-time the percentage of vibrational energy that is being transmitted through a structure. It also plots the transmissibility curve of the system and indicates the operational point.

this application requires the use of the vibepro signal adapter (daq box) and two accelerometers.

features:

• cpm or hz option
• velocity or acceleration option
• thin or thick spectrum line option
• custom logos for reports
• easy step by step instructions
• easy report sharing via email
• touch markers for custom measurements
• informative diagrams for setup instruction

Data Collector & Vibration Analyzer - VibePro 7

VibePro is a vibration analyzer application that collects and analyzes vibration signals to the iPad. The application can be used either for single readings or doing full vibration analysis routes. Route data can be post-processed directly in VibePro or in a myriad of apps available for other platforms including: Windows, Mac or through a web application that includes advanced algorithmic features.

New in Version 7

- High Resolution Mode :

a) For single measurement mode onlyb) 0.33 Hz: provides ability to see spectrum peaks between 20CPM and 80CPM

- Editing Functions in Route :

a) Allows: deleting, duplication, and renaming route data

- Machine Point Library

- Fresh New User Interface

- Change Sensors Quickly with Calibration Presets

- TWF Capture and Analysis

Features:

- Real Time Spectrum Analysis

- Single measurement reports with easy email sharing

- Recorded readings for post processing

- Routes have never been easier with VibePro7

- Route measurement trending built into VibePro7

- Free web app available for remote data trending

Vibration Analyser- VibePro-EX with Bluetooth Sensor

VibePro EX builds upon the great foundation established by VibePro. The EX version includes all of the features found in VibePro plus some new ones only available in this version. The app was written to work with our brand new sensor that communicates with the iPad over Bluetooth.

Software Features:

• Single Measurement Reporting
• Hierarchy Data Collection
• Collect TWF data to capture both acceleration and velocity data
• Edit measurements live
• Edit Point Settings
• Sample Rate user setting
• Number of Samples user setting
• Bearing Library
• Velocity and Acceleration ISO Alert and Alarm settings
• Add machine photos and measurement points
• Hierarchy View
• Generate measurement reports from the iPad
• Remote analysis through VibePro-EX Web App

Miniature Type Accelerometers

• These piezoelectric accelerometers are particularly suited for small and light test objects. Of particular advantage may also be their high resonant frequencies. Due to the piezoelectric principle with its wide dynamic range both high acceleration and lowest vibration can be measured with the same sensor. The miniature accelerometers are mounted adhesively or by an M3 base thread. The KS98.10/100 can be mounted by a plastic clip in three different directions.
• All Models are particularly suited for modal and structural analysis.

Application

• Measurement of hand-arm vibrations to EN ISO 5349:2001 during development and application of hand-held machine tools
• Evaluation of the potential risk of diseases in blood vessels, nerves, joints, bones and muscles

Properties

• Contains an evaluation filter type Wh to ISO 8041
• Measurement of 1, 2 or 3 axes with the possibility of evaluating not measured axes by a correction factor
• Calculation of the daily vibration exposure A(8) integrated, also for different activities, Excel export possible
• PC based measuring system using the IEPE / USB interface M302 and IEPE compatible accelerometers
• The instrument has a clone function, i.e. several program windows can be operated simultaneously with different settings
• Offline measurement with stored data
• Available as kit: *One-handle version: VM-HAND Kit One *Two-handle version: VM-HAND Kit Two

Application

• VM-BODY: Measurement of whole-body vibrations in vehicles, railways, construction machines, buildings etc. to EN ISO 263
• VM-SHIP: Measurement of whole-body vibrations on board ships to ISO 6954
• Evaluation of comfort and potential health risk

5th generation of vibration analyzers!

• DC-23 is a dual channel vibration analyzer of the new generation.
• Main device feature two-channel simultaneous and synchronized data collection. All measurement results are acquired from single time signal.
• This approach allows to cut down the measurement time by 3-6 times in comparison with previous generation vibration analyzers.

New features:

• Increase of max frequency up to 51200 Hz
• Increase of frequency resolution up to 51200 lines
• New types of measurements added

High Performance Vibration Meter features rechargeable lithium-ion battery with worldwide charger Switchable low pass filter User-selectable units High performance crisp colour LCD display.RMS, peak, peak-peak, crest factor readings in acceleration, velocity or displacement modes.

Specifications:

• Bearing condition modes (acceleration and velocity)100 memories can store vibration, temperature and time Tough rubberised case Adaptive amplifier for high accuracy AC output .
• Audio output for listening to vibration directly Supplied with MTN/2200T probe sensor, others available.
• Displacement Temperature 200g 2000mm/s2000 m< 100C Modes RMS Peak Peak-peak crest factor bearing acceleration bearing velocity temperature

Industrial Accelerometers

• These piezoelectric vibration sensors have been designed for application under rough environmental conditions. They are dust and water protected. Their mounting base is insulated to avoid ground loops which may cause errors, particularly, close to big machinery. The cable has to be ordered separately according to the requirements of length and quality (e.g. high temperature, oil resistant, flexible metal tubing).
• Models KSI80VC and KSI82VB are compatible with 4-20 mA current loop equipment.
• The transducers KS80D and KSI 8xVB are available with ATEX compliance certificate.
• Useful technical information about piezoelectric accelerometers can be found on our Theory pages.

4-Channel Human Vibration Analyzer

• For Hand-Arm vibration to ISO5349, whole-body vibration to ISO2631 and ship vibration to ISO 6954
• Acceleration, velocity and displacement ranges for machine vibration
• Display of running and interval RMS, maximum RMS (MTVV), vibration dose value (VDV), vector sum, peak and maximum peak value
• Fourth channel for SEAT measurements at driver seats
• 3-channel FFT for the detection of main frequencies
• TEDS support for automatic sensor detection
• Memory for saving measurements by keypress
• Data logger function for RMS or peak values
• USB interface for data transfer to a PC
• Excel macro for the calculation of daily exposure A(8) and report generation
• Compact design

ApplicationEffective tool for the evaluation of mechanical vibrations of on shore wind energy plants up to 3 MW with gears to VDI 3834, Part 1Vibration measurement at tower, nacelle, rotor bearing, gear and generator with only one meter and one sensor

PropertiesThree independent measuring channelsSelectable band filtersDisplay of interval RMS with up to 10 hours averaging time or running RMSMeasurement of vibrations from 0.1 Hz

The Examiner 1000 is designed for ease-of-use in condition-based maintenance programs. It is the ideal tool to begin a Predictive Maintenance Program or to add into an existing World-Class Maintenance Program with FFT data collectors and Analysis Software.

Examiner measures vibration in:

• Acceleration
• Velocity
• Acceleration Enveloping

Vibration analyzer DC-21 - simple and reliable companion in your journey to vibration diagnostics.

DC-21 has in its arsenal all necessary functions for vibration analysis of the following industrial equipment: pumps, ventilators, exhausters, turbines, compressor, electric motors.

Small dimensions and weight (device itself weights only 0, 8 kg), long operation period (no less than 8 hrs of work without charge), ability to work in harsh environments (IP65, temp. -20 - +50 C.), embedded software applications (run-up/coast down, shock, balancing, magnitophone) allows DC-21 to be an useful aid for everyday vibration measurement and diagnostics, as well as for vibration adjustment operations.

Impaq Elite is a portable 4 channel real-time analyzer that is built for advanced noise and vibration analysis in the field. Unique features like dual injection molding and protective sealing provide for IP 65 rating for measurement in harsh environments.Impaq Elite is equipped with a large 6.4 inch color VGA(640 x 480) high resolution touch screen.The combination of Microsofts powerful WinCE operating system and touch screen operation make it very easy and intuitive to use.

• 6.4 VGA color touch screen (640 x 480)
• IP 65 rated, rugged housing made by dual material injection
• Compact flash card for unlimited data storage
• TI 6713 DSP for high speed real-time processing
• Powered by Microsoft WinCE system
• USB interface for convenient PC interface
• High capacity lithium-ion battery
• Optional analysis software modules
• FFT spectrum analysis
• Route based data collection
• Computed order tracking analysis
• Octave spectrum analysis
• Multi-plane rotor balancing
• Raw data recording

Special Purpose Accelerometer

Special Purpose Sensors extend the range of vibration analysis and monitoring tasks that can be undertaken by modifying the design or sensor type. Thus, models can be selected that can:

• Work at more elevated temperatures
• Work at lower frequencies
• Measure different vibration parameters
• Permit simultaneous measurement of temperature
• Permit more than one vibration parameter to be measured simultaneously by the same sensor

This vibration meter allows you to conduct vibration analysis at the touch of a button. The economical and easy-to-use meter displays color coded alarm levels for ISO values and bearing damage (BDU) on the full color OLED display; green (good), yellow (caution), and red (stop).Easily identify, bearing, balance, and alignment problems

• ISO built-in alarms
• Easily identify bearing problems with BDU reading
• Built in band filters detect equipment problems:
• 1X (unbalance), 2X (misalignment), 3X (looseness)
• View complex issues with the 800-line spectrum with zoom and cursor
• Ruggedized IP67 design
• Trend data with included C-trend Lite software
• Standard cable mounded accelerometer with magnet
• Built in Bluetooth communication capability
• USB docking station to download to a PC
• Easily collect and store data

We are offering a wide range of Vpod Vibration Meter to our valuable cleints. In addition, clients can get the Vpod Vibration Meter from us at industry leading rates. The vPod ll can download a pre-defined measurement route for mass data collection. The built-in review mode of the vPod ll shows the stored data. The patented G-Spike enables you to quickly connect to the detection probe.

Features:

• SMD (surface mount) production
• Battery charge indicator
• Input bias indicator
• Backlit, high resolution LCD display
• Average, peak hold and freeze modes
• Selectable gain

Specifications:

• Memory for storing up to 1, 000 data
• Review data mode
• RS-232C interface
• Route-Based collection

ApplicationMachine condition monitoring to ISO 10816-1 / -6 etc.Roller bearing monitoring to VDI 3832 etc.General vibration measurement in laboratory and industryQuality controlOptical rotation speed measurementNon-contact temperature measurementPropertiesMeasurement of vibration acceleration, velocity and displacementDisplay of true RMS, peak value and crest factorExternal precision shear type accelerometer with magnetic base, built-in infrared thermometer and non-contact optical rpm sensor with laser pointerAutomatic detection of measuring points via the sensor base with electronic VMID measuring pointsGraphical trend displaySpectral analysis for acceleration and velocityMemory for 16000 measurements, USB interfacePC software for measuring point management to MIMOSA convention(ISO 13373-1) and measuring data archivingHeadphone outputSimple operation - no training requiredEngilsh, German, French, Spanish, Italian and Dutch language supportBrilliant, power-saving colored OLED displayPocket-sized with economic AAA batteries or accumulators

Specifications

• Displacement, velocity, acceleration measurements and spectrum analysis
• Frequency and time domain measurements, enveloping detector
• Balancing program up to 8 planes, up to 14 points
• Laser alignment advanced horizontal, vertical mechanism alignment
• On site express rolling bearings tester
• Standard file system FAT16, use of standard SD (or mini, micro SD) card provide up to 1GB memory for data storage
• Standard file system provide user defined folders structure and time and date stamped data files
• and much more.

Standard Features

• Displacement, velocity, acceleration measurements and spectrum analysis
• Frequency and time domain measurements, enveloping detector
• Balancing program up to 8 planes, up to 14 points
• Laser alignment advanced horizontal, vertical mechanism alignment
• On site express rolling bearings tester
• Standard file system FAT16, use of standard SD (or mini, micro SD) card provide up to 1GB memory for data storage
• Standard file system provide user defined folders structure and time and date stamped data files
• Firmware - upgradeable by user
• Wide temperature range graphical LCD (Liquid Crystal Display) with 160 x 160 pixels and white LED backlight

Features

• Tri-axial Hand Arm vibration Measurements
• Large Dynamic Range
• Re-chargeable Battery Pack & Charger
• Fully compliant with ISO 8041 : 2005
• Large Colour Display
• Large Flash memory
• Rugged Accelerometer and Cable for industry
• Only 3 operational buttons for simple use

Applications

Hand Arm Vibration to ISO 5349 : 2001

Features:

• Measuring vibration velocity, displacement and acceleration.
• Small size, transducer included, battery powered, no other component required.
• Optional for inner or external Accelerometer.
• One button control both power and measurement.

Specifications:

• 3 1/2 LCD digital display, sampling per second.
• Suitable for monitoring machinery vibration caused by out-of-balance, misalignment, geardamage, bearing faults and etc.
• Amplitude Ranges:Displacement: 1-1999 m (or 200 mil)
• Peak to peak Velocity: 0.1-199.9 mm/s (or 20 in/s)
• True RMS Acceleration: 0.1-199.9 m/s2 (or 20 g) Peak
• Overall accuracy: +5%
• Temperature range: 0 - 50 0C
• Displacement: 10-500Hz
• Velocity: 10-1000Hz
• Acceleration: 10-1000Hz(Inner accelerometer 908B)10-10000Hz (Depending on external accelerometer model)
• Battery: 9V

vibration transmissibility measuring tool

vibration transmissibility is an app that measures in real-time the percentage of vibrational energy that is being transmitted through a structure. It also plots the transmissibility curve of the system and indicates the operational point.

this application requires the use of the vibepro signal adapter (daq box) and two accelerometers.

features:

• cpm or hz option
• velocity or acceleration option
• thin or thick spectrum line option
• custom logos for reports
• easy step by step instructions
• easy report sharing via email
• touch markers for custom measurements
• informative diagrams for setup instruction

Data Collector & Vibration Analyzer - VibePro 7

VibePro is a vibration analyzer application that collects and analyzes vibration signals to the iPad. The application can be used either for single readings or doing full vibration analysis routes. Route data can be post-processed directly in VibePro or in a myriad of apps available for other platforms including: Windows, Mac or through a web application that includes advanced algorithmic features.

New in Version 7

- High Resolution Mode :

a) For single measurement mode onlyb) 0.33 Hz: provides ability to see spectrum peaks between 20CPM and 80CPM

- Editing Functions in Route :

a) Allows: deleting, duplication, and renaming route data

- Machine Point Library

- Fresh New User Interface

- Change Sensors Quickly with Calibration Presets

- TWF Capture and Analysis

Features:

- Real Time Spectrum Analysis

- Single measurement reports with easy email sharing

- Recorded readings for post processing

- Routes have never been easier with VibePro7

- Route measurement trending built into VibePro7

- Free web app available for remote data trending

Vibration Analyser- VibePro-EX with Bluetooth Sensor

VibePro EX builds upon the great foundation established by VibePro. The EX version includes all of the features found in VibePro plus some new ones only available in this version. The app was written to work with our brand new sensor that communicates with the iPad over Bluetooth.

Software Features:

• Single Measurement Reporting
• Hierarchy Data Collection
• Collect TWF data to capture both acceleration and velocity data
• Edit measurements live
• Edit Point Settings
• Sample Rate user setting
• Number of Samples user setting
• Bearing Library
• Velocity and Acceleration ISO Alert and Alarm settings
• Add machine photos and measurement points
• Hierarchy View
• Generate measurement reports from the iPad
• Remote analysis through VibePro-EX Web App

Miniature Type Accelerometers

• These piezoelectric accelerometers are particularly suited for small and light test objects. Of particular advantage may also be their high resonant frequencies. Due to the piezoelectric principle with its wide dynamic range both high acceleration and lowest vibration can be measured with the same sensor. The miniature accelerometers are mounted adhesively or by an M3 base thread. The KS98.10/100 can be mounted by a plastic clip in three different directions.
• All Models are particularly suited for modal and structural analysis.

Application

• Measurement of hand-arm vibrations to EN ISO 5349:2001 during development and application of hand-held machine tools
• Evaluation of the potential risk of diseases in blood vessels, nerves, joints, bones and muscles

Properties

• Contains an evaluation filter type Wh to ISO 8041
• Measurement of 1, 2 or 3 axes with the possibility of evaluating not measured axes by a correction factor
• Calculation of the daily vibration exposure A(8) integrated, also for different activities, Excel export possible
• PC based measuring system using the IEPE / USB interface M302 and IEPE compatible accelerometers
• The instrument has a clone function, i.e. several program windows can be operated simultaneously with different settings
• Offline measurement with stored data
• Available as kit: *One-handle version: VM-HAND Kit One *Two-handle version: VM-HAND Kit Two

Application

• VM-BODY: Measurement of whole-body vibrations in vehicles, railways, construction machines, buildings etc. to EN ISO 263
• VM-SHIP: Measurement of whole-body vibrations on board ships to ISO 6954
• Evaluation of comfort and potential health risk

5th generation of vibration analyzers!

• DC-23 is a dual channel vibration analyzer of the new generation.
• Main device feature two-channel simultaneous and synchronized data collection. All measurement results are acquired from single time signal.
• This approach allows to cut down the measurement time by 3-6 times in comparison with previous generation vibration analyzers.

New features:

• Increase of max frequency up to 51200 Hz
• Increase of frequency resolution up to 51200 lines
• New types of measurements added

High Performance Vibration Meter features rechargeable lithium-ion battery with worldwide charger Switchable low pass filter User-selectable units High performance crisp colour LCD display.RMS, peak, peak-peak, crest factor readings in acceleration, velocity or displacement modes.

Specifications:

• Bearing condition modes (acceleration and velocity)100 memories can store vibration, temperature and time Tough rubberised case Adaptive amplifier for high accuracy AC output .
• Audio output for listening to vibration directly Supplied with MTN/2200T probe sensor, others available.
• Displacement Temperature 200g 2000mm/s2000 m< 100C Modes RMS Peak Peak-peak crest factor bearing acceleration bearing velocity temperature

Industrial Accelerometers

• These piezoelectric vibration sensors have been designed for application under rough environmental conditions. They are dust and water protected. Their mounting base is insulated to avoid ground loops which may cause errors, particularly, close to big machinery. The cable has to be ordered separately according to the requirements of length and quality (e.g. high temperature, oil resistant, flexible metal tubing).
• Models KSI80VC and KSI82VB are compatible with 4-20 mA current loop equipment.
• The transducers KS80D and KSI 8xVB are available with ATEX compliance certificate.
• Useful technical information about piezoelectric accelerometers can be found on our Theory pages.

4-Channel Human Vibration Analyzer

• For Hand-Arm vibration to ISO5349, whole-body vibration to ISO2631 and ship vibration to ISO 6954
• Acceleration, velocity and displacement ranges for machine vibration
• Display of running and interval RMS, maximum RMS (MTVV), vibration dose value (VDV), vector sum, peak and maximum peak value
• Fourth channel for SEAT measurements at driver seats
• 3-channel FFT for the detection of main frequencies
• TEDS support for automatic sensor detection
• Memory for saving measurements by keypress
• Data logger function for RMS or peak values
• USB interface for data transfer to a PC
• Excel macro for the calculation of daily exposure A(8) and report generation
• Compact design

ApplicationEffective tool for the evaluation of mechanical vibrations of on shore wind energy plants up to 3 MW with gears to VDI 3834, Part 1Vibration measurement at tower, nacelle, rotor bearing, gear and generator with only one meter and one sensor

PropertiesThree independent measuring channelsSelectable band filtersDisplay of interval RMS with up to 10 hours averaging time or running RMSMeasurement of vibrations from 0.1 Hz

The Examiner 1000 is designed for ease-of-use in condition-based maintenance programs. It is the ideal tool to begin a Predictive Maintenance Program or to add into an existing World-Class Maintenance Program with FFT data collectors and Analysis Software.

Examiner measures vibration in:

• Acceleration
• Velocity
• Acceleration Enveloping

Vibration analyzer DC-21 - simple and reliable companion in your journey to vibration diagnostics.

DC-21 has in its arsenal all necessary functions for vibration analysis of the following industrial equipment: pumps, ventilators, exhausters, turbines, compressor, electric motors.

Small dimensions and weight (device itself weights only 0, 8 kg), long operation period (no less than 8 hrs of work without charge), ability to work in harsh environments (IP65, temp. -20 - +50 C.), embedded software applications (run-up/coast down, shock, balancing, magnitophone) allows DC-21 to be an useful aid for everyday vibration measurement and diagnostics, as well as for vibration adjustment operations.