Our Products
Salient Features
Machine Comes with Standard Functional Accessories:
Die Set (total 14 Nos.):
Die Set is Customizable as per Your Requirement, Please Freely Discuss with Our Company.
Standard Functional Accessories:
Technical Specifications
Particular | HIW- 65 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 65 ton |
Punch Capacity (Diameter x Thickness) | 22 x 20 mm |
50 x 9* mm | |
Throat Depth | 310 / 510 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 20 |
Working Height Up to Die | 910 mm |
Shearing Flat Shearing | |
Flat Bar Shear (width x Thickness) |
350x 15 mm |
240 x 20 mm | |
Blade Length | 360 mm |
Angle Flange Trim | 75 mm |
Working Height | 920 mm |
Angle shearing (With universal angle cutting mechanism) | |
At 90 Shearing | 130 x 130 x 13 mm |
At 45 Miter Shearing | 65 x 65 x 8 mm |
Working Height | 1150 mm |
Section Shearing | |
Round Bar Shear (Dia.) | 40 mm |
Square Bar Shear | 38 x 38 mm |
Channel Shear | 150* mm |
I Beam Shear | 150* mm |
Working Height | 1300 mm |
Notching | |
Rectangular Notcher (W x D x T) | 50.8 x 90 x 9 mm |
Vee-Notcher (Side x Side x T) | 90 x 90 x 8* mm |
Large Vee – Notcher (Side x Side x T) | 145 x 145 x 8* mm |
Working Height | 850 mm |
Single Vee Press Brake (W x T) | 250 x 15* mm |
Multi Vee Press Brake (W x T) | 500 x 5* mm |
Angle Bending | 102 x 6* mm |
Pipe Notching (Dia.) | 114* mm |
Electric Power (HP) | 7.5 HP |
Net Weight (Apr.) | 2600 / 3100 kg |
Machine Dimension (Apr.) (LxWxH) | 1970 x 800 x 2000 mm |
Based On Material Strength Of 450 N/MM2 | |
Illustration,Dimension and Weight…. Are Not Binding As Designs Are Constantly Being Reviewed | |
(‘*’ Mark) Are Optional |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Argo Hytos /Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB / Havells | |
Oil Cooler (Fan type Heavy Duty) | ACE | |
Electric Control Panel | PLC | Delta |
Foot Switch | BCH / Brisk | |
Photo Safety Guard (optional) | Orbitten | |
Counter | Multi-span | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | KASTAS(Turkey) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 35 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 35 ton |
Punch Capacity (Diameter x Thickness) | 18 x 14 mm |
25 x 8 mm | |
Throat Depth | 175 mm |
Maximum Stroke length | 60 mm |
Cycles / Min. (20mm Stroke length) | 30 |
Motor | 5 HP |
Working Height Up to Die | 910 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 45 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 45 ton |
Punch Capacity (Diameter x Thickness) | 20 x 15 mm |
35 x 8 mm | |
Throat Depth | 175 / - mm |
Maximum Stroke length | 60 mm |
Cycles / Min. (20mm Stroke length) | 30 (high speed also available) |
Motor | 5 HP |
Working Height Up to Die | 910 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 55 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 55 ton |
Punch Capacity (Diameter x Thickness) | 20 x 16 mm |
45 x 8* mm | |
Throat Depth | 275 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 25-32 (high speed also available) |
Motor | 5 / 7.5 HP |
Working Height Up to Die | 910 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 65 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 65 ton |
Punch Capacity (Diameter x Thickness) | 22 x 20 mm |
50 x 9* mm | |
Throat Depth | 310 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 20-25 (high speed also available) |
Motor | 7.5 HP |
Working Height Up to Die | 910 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 85 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 85 ton |
Punch Capacity (Diameter x Thickness) | 26 x 22 mm |
50 x 12 mm | |
Throat Depth | 310 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 20-25 (high speed also available) |
Motor | 10 HP |
Working Height Up to Die | 950 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 110 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 110 ton |
Punch Capacity (Diameter x Thickness) | 26 x 26 mm |
50 x 15 mm | |
Throat Depth | 310 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 21 |
Motor | 10 HP |
Working Height Up to Die | 950 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 135 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 135 ton |
Punch Capacity (Diameter x Thickness) | 33 x 27 mm |
50 x 18 mm | |
Throat Depth | -/ 570 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 20 |
Motor | 15 HP |
Working Height Up to Die | 1020 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |
Machine Comes with Standard Functional Accessories:
Die Set : A 10 Pair of Punch and Die, (select Any 10 Round Punch - Die Set from Dia. 8 Mm to 20mm)
Standard Functional Accessories:
Technical Specifications
Particular | HIP - 165 |
---|---|
Punching (With Quick Change) | |
Punching Pressure | 165 ton |
Punch Capacity (Diameter x Thickness) | 40 x 30 mm |
34 x 34 mm | |
Throat Depth | 510 mm |
Maximum Stroke length | 100 mm |
Cycles / Min. (20mm Stroke length) | 31 |
Motor | 20 HP |
Working Height Up to Die | 1110 mm |
For Batter Quality We Use Standard Worldwide Part Which Mention Below Table
Type | Part Name | Make |
---|---|---|
Power Pack | Pressure Gauge | Micro |
Valves & Pumps | Yuken / Rexroth / Nachi | |
Filter | Hydroline | |
Oil Pipe (Flexible) | Supersile / Gats | |
Motor | Siemens / ABB | |
Electric Control Panel | Foot Switch | BCH / Brisk |
Photo Safety Guard (optional) | Orbitten | |
MCB & Relay | Schneider / T-C | |
Proximity Switch | E-S | |
Phase Preventer | GIC (L&T) | |
Cylinder | Seal | Hallite (UK) / Parker / Tecklon(Italy) |
Rod | Hard Chrome Platted (200 micron) | |
Fasteners | Mostly Are TVS High Tensile Graded |