Seat type modular valve. Intended for by - passing. Pressure control valve, Pressure reducing valve etc. to achieve reverse free flow condition.Allow free flow from port A to port B or from port B to port A ( see model code ) and offer leakage free closure in opposite direction. Available in four sizes of standard interfaces conforming to ISO 5781, DIN 24340 or IS 10187 Each model available with options of four cracking pressures : 0.5, 1.5, 3 and 5 bar.

These units are manufactured in a wide range of sizes and specification options but all have the same basic function.A dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. Switches are field adjustable over the full range. Where batching, trending, totalising or recording is required, all Flow-Mon units can be supplied with a 0-10V or4-20mA output. All sizes are manufactured to the same simple design concept, the main characteristic of which ensures that the pressure drops are confined to an absolute minimum (see ‘pressure drop’ charts) across the vane orifice at full flow, with viscosities as high as 600cS. Sizes are defined by pipe size and or maximum flow capacity, and every flow switch is individually calibrated so that full scale deflection is used in each application i.e. the maximum scale reading coincides with the maximum requirement of system as specified by the customer. Calibration may be in any units with single or duel scale to specification.

Elastomer end cushioning, Wide varieties of mountings, Magnetic & Non Magnetic versions, Aluminium profile (square) cylinder barrel.

• Automatic GradeManual

Completely encapsulated mechanism for protection against dirt. Five chamber design for better reduction in dynamic forces and longer valve life. Available as spring centered, spring off-set or detented model. Operating head can be rotated by 90° x 4 around spool axis for flexibility in mounting. Valve mounting interface conforms to ISO 4401-03-02. Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance.

• MaterialCarbon Steeel, Metal, PP, PVC, Stainless Steel
• Automatic GradeAutomatic
• ColorBlack, Blue, Red, Sky Blue, White
• ConditionNew, Used
• TypeCheck Valves
• ApplicationGas Fitting, Oil Fitting, Water Fitting
• PatternPlain
• PressureHigh Pressure, Low Pressure, Medium Pressure
• FeatureBlow-Out-Proof, Casting Approved, Durable, Easy Maintenance., Investment Casting, Smooth Finish And Robust Design

This pump is for feeding grease to bearings and other moving parts of machines having 2-20 lubrication points. Options of pneumatic drive and manual drive are available to choose from. Refer technical specifcations for suitable model.

Seat type modular valve. Intended for by - passing. Pressure control valve, Pressure reducing valve etc. to achieve reverse free flow condition.Allow free flow from port A to port B or from port B to port A ( see model code ) and offer leakage free closure in opposite direction. Available in four sizes of standard interfaces conforming to ISO 5781, DIN 24340 or IS 10187 Each model available with options of four cracking pressures : 0.5, 1.5, 3 and 5 bar.

These units are manufactured in a wide range of sizes and specification options but all have the same basic function.A dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. Switches are field adjustable over the full range. Where batching, trending, totalising or recording is required, all Flow-Mon units can be supplied with a 0-10V or4-20mA output. All sizes are manufactured to the same simple design concept, the main characteristic of which ensures that the pressure drops are confined to an absolute minimum (see ‘pressure drop’ charts) across the vane orifice at full flow, with viscosities as high as 600cS. Sizes are defined by pipe size and or maximum flow capacity, and every flow switch is individually calibrated so that full scale deflection is used in each application i.e. the maximum scale reading coincides with the maximum requirement of system as specified by the customer. Calibration may be in any units with single or duel scale to specification.

Elastomer end cushioning, Wide varieties of mountings, Magnetic & Non Magnetic versions, Aluminium profile (square) cylinder barrel.

• Automatic GradeManual

Completely encapsulated mechanism for protection against dirt. Five chamber design for better reduction in dynamic forces and longer valve life. Available as spring centered, spring off-set or detented model. Operating head can be rotated by 90° x 4 around spool axis for flexibility in mounting. Valve mounting interface conforms to ISO 4401-03-02. Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance.

• MaterialCarbon Steeel, Metal, PP, PVC, Stainless Steel
• Automatic GradeAutomatic
• ColorBlack, Blue, Red, Sky Blue, White
• ConditionNew, Used
• TypeCheck Valves
• ApplicationGas Fitting, Oil Fitting, Water Fitting
• PatternPlain
• PressureHigh Pressure, Low Pressure, Medium Pressure
• FeatureBlow-Out-Proof, Casting Approved, Durable, Easy Maintenance., Investment Casting, Smooth Finish And Robust Design

This pump is for feeding grease to bearings and other moving parts of machines having 2-20 lubrication points. Options of pneumatic drive and manual drive are available to choose from. Refer technical specifcations for suitable model.