Hydrill Equipments

Singanallur, Coimbatore, Tamil Nadu

Paver Block Making Machine - HYDRILL 800-HP is a stationery type concrete pavement block making machine specifically designed for super fine blocks. Two operators can work simultaneously on this machine, from both sides. Mould is filled manually. A hydraulically operated mould opener is incorporated on either sides of the machine for easy opening of the mould.

HYDRAULIC PRESS

Specifications :

• Hydraulic Press(Upward): 60 ton
• Power : 5 HP
• Oil Tank Capacity: 40 litres
• Production: 900 to 1200 blocks / shift

DRUM MIXER

Specifications :

• For Colour Mxer
• Motor : 2 HP
• Loading Capacity : 150 to 250 Kg / batch

Designer Tile Making Machine :

Vibrator table has been specifically designed for high production wet cast concrete products using wooden carrier frames supporting plastic mould. The moulds with green concrete are kept for initial strength achieving over 24 hours. Then tiles are demoulded from the plastic mould and kept in controled atmosphere for three days. Then laquer coating can be applied for added attractiveness and wear resistance. Longlasting colour faces can be done by adding white cement with colour pigments. Colour pigments with white cement and sand can be mixed in tile mixer and aggregate with grey cement will be mixed in conventional concrete mixer.

Vibrator table Specifications :

• Production Capacity: 4000 sqft / shift
• Power: 1.5 HP Per Table X 2 = 3 HP
• Vibrating Table Size: 3000 x 830
• Overall Dimensions: 7900 x 900 x 1000 mm (L X B X H)(Approximately)
• Weight: 500 Kg (Approximately)
• Maximum Height of Tile : 100 mm
• Maximum size of Tile : 600 X 600

We manufacture Fly ash Brick Making Machine which are capable of making bricks from fly ash. This brick making machine sturdily designed has excellent capacity and speed to handle big output demands. Raw materials: Fly Ash, Lime, Zibsem, Quarry dust, Iron Oxide, etc.

The specifications ofRotary Hydraulic Press:

The specifications ofPan Mixer:

Reverse Discharge Mixer Machine

Concrete is most commonly used construction material known for its proven strength & durability. It is made from naturally available materials like stone aggregates & sand mixed with cement and water. Present day RCC structural designs need high quality concrete mix, consistent in strength & workability, as concrete is a prime ingredient next only to steel.

Standard Features

• Reversible Drum thru push button.
• Skip Bucket lifted / lowered hydraulically with a simple lever.
• Life lubricated sealed bearings for rollers.
• Grease cups / nipples for rotating parts.
• Power transmission thru V belts for smooth operation.
• Analog gauge to read loads in bucket.
• Level indicators on water & oil tanks.
• Dis-assemblable axle for transportation on vehicles.
• Hand lever for cranking in case of power failures.
• Auto water flow controller (only on electronic machine)

Construction Special Features

• Load cell based digital weighing system.
• Liquid admixture dosing system
• Multi bucket configurations for individual aggregates loading separately
• Four wheel chassis
• External weigh batching (to improve productivity)
• Legs with screw jacks for easy levelling

Hydrill Equipments

Hydrill Equipments offer Single Shaft Peddel Mixer - Unitised steel frame construction minimize vibration and wear on the machine and support structure mixer. Tub wall are cylindrical for easy, energy saving and tumbling action to give the batch uniformity and need for top equality mix.

Hydril Equipments - This Machine is a hydraulically operated shearing machine used to shear concrete blocks, which gives the sheared face a granite like surface.

Hydraulic Block Splitter Specification:

Pan Mixer :

The Pan type mixer is designed to allow to operate on a wide range of application including Dry, semi dry or zero slump mixing for concrete and other mixtures. The mixing pan is made of steel plate of substantial thickness. The bottom and wall are mounted anti wear alloy steel liner. Spring loaded mix arms are fitted in the rotary head and can be adjusted to compensate wearing. The gear reducer is directly connected to electrical motor.

Mobile Concrete Batching Plant Specification:

• Load Capacity : 0.5 cu.m3 / (400 kg Aggregate).
• Output : 6 cu.mt / hr
• Power : 15 HP
• Discharge : Door opened by hydraulic.
• Input : Hopper lifted by hydraulic cylinder.
• Load cell : Attached to hopper base

Mobile Concrete Batching / Mixing Plant :

Salient Features:

• Very slim and compact design.
• Plant can be erected and commissions within two days.
• Remarkably cost efficient.
• Plant operations is very salient, in & clean surrounding.
• Least maintenance of plant, due to less wear & tear of parts.
• Complete plant can be transported in the 40ft, trailer.
• Water tank, pump addition burner and addition pump inbuilt.

Optionals:

• Online printing system
• Discharge belt conveyor
• Fly ash feeding system
• Cement storage silo