Hyd-Air Engineering Pvt. Ltd.

Chakan, Pune, Maharashtra

Try out and start application of SUCO ready-wired switches solution for those who wish to fulfill commercial vehicles, mobile hydraulics, and similar applications where degree of protection IP67 or IP6K9K may be required. At SUCO any commercially-available connector system can be supplied ready-wired with a customer-specific cable length. This ensures great flexibility, and we can also supply small quantities without the need for expensive tooling. The technical data of ready-wired pressure switch variants are substantially the same as those of the standard models. Differences in the technical data will be agreed with the customer and defined on a customer-specific drawing of the ready-wired pressure switch. Select from the wide range of plugs:Plugs to DIN 72585, AMP Junior-Timer, Cannon plugs, AMP Superseal, Packard plugs (Weather Pack), Packard plugs (Weather Pack), Deutsch plugs (DT 06), Deutsch plugs (DT 04 - 2P), Deutsch plugs (DT 04 - 3P)

Try out and start application of SUCO pressure switches 30 AF:Panel or manifold mounting for clear, maintenance-friendly installationEasily adjustable by userHigh-quality micro-switch for reliable switchingHigh overpressure safetyConnection plug for simple installation on site Technical data:Degree of protection: IP65 valve connector fittedSwitching frequency: 200minTemperature stability for diaphragmseal materials:NBR -30C to +100CEPDM -30C to +120CFKM -5C to +120CMechanical life expectancy: 10^6 cycles (at pressures up to 50 bar)Vibration resistance: 10g 5-200 Hz sine-waveShock resistance: 294 ms; 14 ms half-sine-waveBody material: AlMgSi1 F28Hysteresis:Type 0159: 10-30% (not adjustable)Type 016101620175: 10-30% (adjustable at works)

SUCO has enhanced its product portfolio with a new series of pressure switches with fully integrated connector varieties. Until now, SUCO has already offered a membranepiston pressure switch with an integrated bayonet connector (DIN 72585) known as type 01200121. This product range is now expanded with the addition of double-pole and triple-pole Deutsch-Connectors, AMP Superseal, AMP Junior Timer, Packard Metri Pack and M12 connector. SUCO also offers the counterparts to these connectors with a standardised cable length of 2 meters. The usage of these kinds of pressure switches will considerably reduce assembly time, since the connection can be activated by a simple turning movement or by fastening the components together and latching them afterwards. The basis of these integrated pressure switches are the million times proved mechanical pressure switch types 0166 and 0163 (for technical specifications see www.suco.de), in which the higher sealing protection of the IP 67 standard (depending on connector) can be guaranteed.

Try out and switch to SUCO hex 27 one of the most demanded pressure switches of SUCO, if you are looking for:High-quality micro-switch for reliable switchingEasy adjustable switching point - even during operationAdjustable hysteresisSelf-cleaning contacts for a long working life (only 250V versions)High overpressure safetyLong working life under harsh operating conditionsConnector plug or protective cap to protect against moisture and dirt, and thus easy replacement on site by service personnelVarious thread connections available to suit your installationA choice of zinc-plated steel or stainless steel as body material and a selection of diaphragm materials ensure high resistance to media Technical data:Degree of protection: IP65 with suitable connector installed, Terminals IP00Switching frequency: 200minTemperature stability for diaphragmseal materials:NBR -30C to +100CEPDM -30C to +120CFKM -5C to +120CSilicone -40C to +120C

Try out and switch to SUCO hex 24 one of the most demanded pressure switches of SUCO, if you are looking for:Low-cost mechanical pressure switch to high SUCO quality standardsNormally Closed or Normally Open compact switchSwitching power 100VAHigh overpressure resistance (up to 35, 300 and 600 bar)Long working life even under harsh operating conditionsEasily adjustable switching point - even during operationVarious thread connections to suit your installation (request data sheet)Ready-wired variantsVersions with push-on and screw terminalsWith gold contacts on requestZinc-plated Steel, Brass and Other body materialsIntegrated DIN 72585 connector (type 01200121) Technical data:Degree of protection: IP65 (IP67IP6K9K for 0120 0121), Terminals IP00Switching frequency: 200minTemperature stability for diaphragmseal materials:NBR -30C to +100CEPDM -30C to +120CFKM -5C to +120CSilicone -40C to +120CHNBR -30C to +120CMechanical life expectancy: 10^6 cycles (at pressures up to 50 bar)Maximum pressure rate: 1 barmsecCurrent rating (resistive): 4 AVibration resistance: 10g 5-200 Hz sine-waveShock resistance: 294 ms; 14 ms half-sine-wave Type0163 - Material Carbon Steel, Over Pressure Safe up to: 600 bar 0164 - Material Stainless Steel, Over Pressure Safe up to: 600 bar0166 - Material Carbon Steel, Over Pressure Safe up to: 300 bar0167 - Material Brass, Over Pressure Safe up to: 35 bar0168 - Material Carbon Steel, Over Pressure Safe up to: 300 bar0169 - Material Carbon Steel, Over Pressure Safe up to: 600 bar

Try out and start application of SUCO explosion-protected pressure switches in potentially explosive atmospheres:ATEX-certified for use in potentially-explosive atmospheresCompact designMicro-switch for reliable operationSwitching point can be easily adjusted by user when switch is in operation Technical data:Type: 0165, 0340, 0341Degree of Protection: IP65Protection zone:1 (Type 0165)22 (Type 0340, 0341)Switching power:1A 250VAC, 0.25A 250VDC (Type 0165)2A 250VAV (Type 0340, 0341)Body material:AlMgSi1 F28 (Type 0165)Steel, zinc-plated Anodised aluminium (Type 0340, 0341)Conductor cross-section:3 x 0, 75mm2 (Type 0165)3 x 0, 5 mm2 (Type 0340, 0341)Switching frequency: 200minTemperature stability for diaphragmseal materials:NBR; EPDM -20C to +80C; FKM -5C to +80CMechanical life expectancy: 10^6 cycles (at pressures up to 50 bar)Vibration resistance: 10g 5-200 Hz sine-waveShock resistance: 294 ms; 14 ms half-sine-waveCable length: standard delivery 2 m with wire end sleevesHysteresis: 10 30% (not adjustable)

Try out and start application of SUCO vacuum pressure switches:Low-cost switch with high SUCO standard of qualitySwitching point easy to adjustHigh overpressure resistance and long working life even under harsh operating conditionsModel 0150 with micro-switch for reliable switchingModel 0150 with panel-mounting featureModel 0151 as normally open or normally closed Technical data:Type: 0150, 0151Degree of Protection: IP65Max. voltage:250 V (Type 0150)42 V (Type 0151)Switching frequency: 200minTemperature stability:-20C - +100C (Type 0150)-20C - +120C (Type 0151)Body material:AlMgSi1 F28 (Type 0150)Brass (Type 0151)Mechanical life expectancy: 10^6 cycles (at pressures up to maximum 20 bar)Vibration resistance: 10g 5-200 Hz sine-waveShock resistance: 294 ms; 14 ms half-sine-wave