Bhopal, Madhya Pradesh, India
Our Products
| Feature :Moving beam Synchronized by differential cylinders.Hardened rollers guide beam for constant blade gap.Blade gap easily adjustable by calibrated levers.Rake angle adjustable to suit thickness and material.Activation from consol and movable foot switch.Sheet clamped Hydraulically before cut starts.Stroke length - position can be set for short jobs.Beam returns on releasing foot switch for smaller cuts.Cutting area illuminated for clear view of ends. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bed Lenth 1000 to 10000 mm, Bed Width 375450 mm Min.Max., Job Diameter 20 to 300 mm, Admit Between Center 300 to 9000 mm, Spindle Bore 100 mm, Main Spindle RPM 0.1 to 1 RPM Main Spindle Motor 3 H.P with ac Variable Frequency Drive
Hydraulic Surface Grinder:
Offering a quality range of grinding machine, surface grinding machine, hydraulic surface grinding machine, hydraulic grinding machine and CNC surface grinding machine.
Features:
Low energy consumption Trouble free performance Long working life
ALL PARTS FINISHED ON IMPORTED MACHINES :
Closed grain Cast Iron Column, Arm, Work Head & Gears
EN Forged Steel Main Spindle & Pinion
Alloy Steel Spindle Ram
Parts Finished on Imported Grinding M/c. All Moving parts Finished to Close Tolerance
Parts properly balanced prior assembly. Main Gear & Pulley
| Model | AEPD-13 | AEPD-20 | AEPD-2 | AEPDL-25 |
| Drilling Capacity | 13mm | 20mm | 25mm | 25mm |
| Piller Dia | 47mm | 75mm | 90mm | 90mm |
| Spindle Nose | Solid | MT-2 | MT-3 | MT-3 |
| Spindle Travel | 75mm | 125mm | 152mm | 250mm |
| Spindle Center to | ||||
| Piller Surface | 155mm | 200mm | 228mm | 250mm |
| No of Spindle Speed | 4 | 8 | 8 | 8 |
| Spindle Speed (RPM) | 500-2800 | 87-3200 | 96-2600 | 70-2000 |
| Base to Spindle Nose | 445 | 925 | 980 | 1000 |
| Electronoc Moto | 0.5 H.P | 1 H.P | 1 H.P | 1 H.P |
| Model | AEPD-38 | AEPDL-38 | AEPD-40 | AEPDL-40A |
| Drilling Capacity | 38mm | 38mm | 40mm | 40mm |
| Piller Dia | 107mm | 111mm | 130mm | 130mm |
| Spindle Nose | MT-4 | MT-4 | MT-4 | MT-4 |
| Spindle Travel | 165mm | 250mm | 215mm | 220mm |
| Spindle Center to | 250mm | 320mm | 305mm | 305mm |
| Piller Surface | ||||
| No of Spindle Speed | 8 | 8 | 8 | 8 |
| Spindle Speed (RPM) | 70-2000 | 70-2000 | 70-2070 | 90-1000 |
| Base to Spindle Nose | 1075mm | 1000mm | 1040mm | 1040mm |
| Electronoc Motor | 1.5 H.P | 1.5 H.P | 1.5 H.P | 1.75-2.5 H.P |
| Machine Application & Usage |
| Boiler Tank, Air Conditioning Channels, Sheet Metal Cover. |
| Cone Making & Other Aluminum & Steel Fabrication, Marine & Ship Building, Pressure Vassals, Wind Mills. |
| Technical Features |
| Bottom roll are fixed and driven by Gears and warm Reduction Gear Box. Top Roll rotates in fixed positions andean be adjusted up & down manually by adjustable screws. |
| Housing are made from M.S. Plate of suitable strength and mounted on heavy base frame. Rolls are made fromforged steel and perfectly machined for accurate result. |
| For longer life and smooth working of machine, Gun Metal Bushes are provide and given sufficient lubrication system. |
| Bending Process |
| Place the Plate between bottom and top rolls by adjusting top roll manually. |
| Down the top roll and give pressure on the plate. Then start Main motor in clock wise direction till one end of the plate comes over first bottom roll reverse the motors and get second end on second bottom. |
| Continue above process until you et desired as shown in picture. |
| Model | Table Length | Top Roll | Bottom Roll | H.P. |
| AEBR-1 | 1250x3 | 100 | 90 | 2 |
| AEBR-2 | 1250x6 | 125 | 105 | 3 |
| AEBR-3 | 1250x 10 | 150 | 125 | 5 |
| AEBR-4 | 1250x 12 | 175 | 140 | 7.5 |
| AEBR-5 | 1250x16 | 190 | 150 | 7.5 |
| AEBR-6 | 1250x 20 | 200 | 160 | 10 |
| AEBR-7 | 1250x 25 | 240 | 200 | 15 |
| AEBR-8 | 1500x3 | 115 | 100 | 3 |
| AEBR-9 | 1500x6 | 140 | 115 | 5 |
| AEBR-10 | 1500x10 | 160 | 135 | 7.5 |
| AEBR-11 | 1500x12 | 180 | 150 | 7.5 |
| AEBR-12 | 1500x16 | 200 | 160 | 10 |
| AEBR-13 | 1500x20 | 215 | 170 | 12.5 |
| AEBR-14 | 1500x26 | 250 | 215 | 20 |
| AEBR-15 | 2000x6 | 160 | 135 | 5 |
| AEBR-16 | 2000x10 | 185 | 150 | 7.5 |
| AEBR-17 | 2000x12 | 205 | 160 | 10 |
| AEBR-18 | 2000x16 | 215 | 175 | 12.5 |
| AEBR-19 | 2000x20 | 230 | 190 | 15 |
| AEBR-20 | 2000x25 | 275 | 230 | 20 |
| AEBR-21 | 2500 x 6 | 175 | 150 | 7.5 |
| AEBR-22 | 2500 x 10 | 200 | 170 | 10 |
| AEBR-23 | 2500 x 12 | 230 | 180 | 15 |
| AEBR-24 | 2500 x 16 | 240 | 200 | 20 |
| AEBR-25 | 2500 x 20 | 260 | 215 | 20 |
| AEBR-26 | 2500 x 25 | 300 | 260 | 30 |
| AEBR-27 | 3000x10 | 240 | 200 | 15 |
| AEBR-28 | 3000x12 | 260 | 220 | 20 |
| AEBR-29 | 3000x16 | 275 | 225 | 20 |
| AEBR-30 | 3000x20 | 290 | 250 | 25 |
| AEBR-31 | 3000x25 | 340 | 290 | 40 |
The provision of tilling head simplifies the cutting face angle quickly and accurately.
Work head holding fixture is fully adjustable with swivel base.
An adjustable stopper limits the longitudinal table reciprocation movement.
The tool & cutter grinding machine runs at mono speed of 3600 RPM and the drive form the motor to spindle is by means of v-belt.
Almost all cylindrical side & face, involute gear, Concave as well as convex cutters.
Bevel lead angle reamers & Cutting face of tap flute can be resharpened with standard accessories.
Drill pints, tap lead & Radius grinding jobs can also be done without problem with extra accessories.
Our range of Centerless Grinding Machine is being highly preferred owing to its remarkable attributes such as longer service life, fine-finish, resistance against corrosion and performance. The offered machines are able to hold aforesaid features attributes as these are being fabricated using supreme quality required basic material and cutting-edge methodology.
Product specification:
Models available:
Cylindrical (external)
PUI-250, PUI-300, PUI-450, PUI-600PUI-800, PUI-1000, PUI-1250, PUI-1500PUI-2000 & PUI-2500
Internal (bore):
PUI-300, PUI-450 & PUI-600.
Centerless:
PUI-50 & PUI-80
| Crank Shaft : |
| Made of Spacial alloy Steel |
| Gears & Clutch : |
| Gears are made of Cast Iron & Clutch is provided of Pin Rolling Key Rigid type for mass production & clutch for continuos stroke. |
| Table & Ram : |
| It is made of high grade Cast iron properly seasoned & perfectly aligned to obtain high accuracy & precision operation. |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rigid Construction hence smooth and Vibration free operation. |
| Fine gained castings and dully Seasoned. |
| All gears are Machines cut and Properly fitted. |
| Extra Accessories : |
| Rotary Table with 36 : 1 Ration (250mm) |
| Electric Motor True Chuck Switch V-belt |
|
||||||||||||||||||||||||||||
