different optics for different beam pattern with high spread using high quality lenses and reflector. Fixture and led lamp comfirm as per, multiple led are used in series and parallel cluster, high grade aluminum pressure die cast housing.

LPG Leakage Detector, Semi conductor sensor heads used for accurate flammable gas detection, Test button verify alarm operation any time, Loud alarm signal more than 80 dB at 10 ft, Easy installation & maintenance.

Sounding a loud alarm signal of exceeding 80dB at 10 feet, Advance electronic accurate design to detect the water leakage, Easy installation & maintenance, Fully automatic operation, Ergonomic design of detector casing.

Street Light T5, Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle, Finish: epoxy powder coating grey hosing & powder coated white reflector, Optics : reflector made of high purity preanodized, Lamp holder : white polycarbonate housing with brass contact & SS Clips

Electric meter box, Made from engineering plastics, Hinge type locking arrangements, Meter push buttons & optical port can be accessed without opening meter box cover, Push buttons & optical provided on meter box.

Rewireable Offload Changeover Switch (Side Handle Operated), Metal Clad Plugs & Sockets : 10A, 20A for single Phase (2P+E), 250V, Rewireable Switch Fuse Unit : 16 Amps to 320 Amps.

Highly efficient heat sink design quickly removes heat away from the LED chip and dissipates heat through the aluminum fin design .This helps to prolong the lifespan of the LED. The reflector is made from high purity imported aluminum for increased reflective efficiency insuring the light directed within the desired area it improves the light uniformity maximization the advantages of energy saving .

Aesthetically pleasing grey colour Internal Sliding Knob Latch, Easy removal of front doors change for left or Right, Gland Plates at top and bottom are removable for ease of use in entry and termination of cables, Clear embossed earthing marking for ease of installation, Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage, Identification labels are proveded for circuit, Gasket are provded to ensure Weather- Proof conditions., Rmoval of front plate for easy maintenance, Optimized dimension ensur enough wiring space for easy cabling and maintenance, Optimized dimension ensur enough wiring space for easy cabling and maintenance, Optimized dimension ensur enough wiring space for easy cabling and maintenance.

Domestic switches, ROHS compliance, Captive screws, Dual protection for Spark shield, High grade flame retardant engineering plastic, High grade flame retardant engineering plastic.

Luminaire housing : Black textured body coated with epoxy powder high pressure Aluminium Die Cast. Mounting can be done by a hook on rubber grommet fixed on the Housing.

ROHS compliance, Captive screws, Dual protection for Spark shield, High grade flame retardant engineering plastic, Silver Nickel Contact for trouble free operations.

No raido frequency interference, High grade flame retardant engineering plastic, Good ventilation for proper heat dissipation, Easy to remove and install, No humming noise.

Salient Features

• Available in Single Phase Two Wire & Three Phase Four Wire.
• Universal Auxiliary Supply 80 to 300V AC/DC.
• Push button based site programming of PT ratio.
• Bright 4 digit 14mm LED display.
• Colour Indication for R, Y, & B phases (for 3 Phase Meter).
• Same model for V & kV.
• Auto scroll facility & scroll lock facility (for 3 Phase Meter).
• Network selection for star (3 Phase 4 Wire) and delta (3 Phase 3 Wire) (for 3 Phase Meter).
• PT Primary Selectable : 110V, 1.1kV, 6.6kV, 11kV, 33kV, 66kV, 132kV, 220kV, & 440kV.
• PT Secondary Fixed : 110V.
• Available in Class Accuracy 1.0 & 0.5

Application

• Electrical Panels - Industrial HT & LT Panels.
• Motor Control Centres, Distribution Contol & Relay Panels.
• Air Conditioning and Refrigeration Panels.
• Genset Panels.
• Generation, Transmission and Distribution Panels.
• Test Benches and Laboratory Equipment.
• Uninterrupted Power Supply.
• Special OEM Application.

Salient Features

• Microprocessor based intelligent auto switching control.
• Automatic C/K and rated step adjustment.
• Automatic CT polarity correction.
• Display of power factor, current & total harmonic distortion of current.
• Programmable sensitivity.
• Last step can be used as alarm / fan output.
• Under / over voltage alarm, under / over compensate alarm & high distortion alarm.
• available in 6, 8, 12 & 14 Steps

Salient Features

• DUMAC software is used for monitoring Dual Source Plus meters using RS485.
• By the software user can communicate upto 255 meters through a single port.
• User can configure all meter parameters, change relay setting through the software itself.
• Reports can be Generated in excel format also
• User can see the details of corresponding meter in a much compact way which includes1.Instantaneous parameters2.History Data3.Mains to Generator Data4.Generator to Mains Data

Salient Features

• Available in Single Phase, Two Wire.
• Range: 10-60A in Accuracy Class-1.
• As per IS : 15884 : 2010.
• Load can be disconnected in case the credit limit becomes Zero or the current exceeds the defined load limit.
• Two latch ralays are provided for reconnection/disconnection of load.
• Buzzer to give alarm in case of low credit/overload.
• Data download through hard wired port for:(a) Last 25 tamper events(b) Load survey data for 45 days
• Allow user to budget their consumption.
• Transparent system for utility and Consumers.
• Manual Meter Reading system not required.
• Meter bill delivery is not required.
• Meter Bill collections follow up is not required to be done by the utility.
• Supply disconnection is automatic for non-Payment Customers.
• Anti-tamper Features provided in the meter as per Indian standards.
• Software solutions for communication also available
• Also available in dual source application.

Application

• For Residential & Commercial Use.

Salient Features

• Made from engineering plastics.
• Hinge type locking arrangements.
• Meter push buttons & optical port can be accessed without opening meter box cover.
• Push buttons & optical provided on meter box.
• Available for both Single Phase & Three Phase Meters.

Salient Features

• Made from engineering plastics.
• Hinge type locking arrangements.
• Meter push buttons & optical port can be accessed without opening meter box cover.
• Push buttons & optical provided on meter box.
• Available for both Single Phase & Three Phase Meters.

Salient Features

• Widest Range of 3P & 4P Contactors upto 800A
• 25 Models in just 9 Frames
• Capacitor Duty Contactors upto 62kvar
• Contactors suitable for Crane, Mining, & other special application also available
• Highest Electrical Life upto 2.5 Million operations
• Confirmity to latest IEC / IS Standards
• Site Mounted add on accessories
• Safety Cover to avoid dust
• Type II co-ordination
• CE Marked & UL Certified

Salient Features

• Range : 40A to 3200A as per IEC 60947 - 6 - 1
• Intelligent integration of control
• Compact Secure Transfer System
• Easy Selection of automatic & manual control
• Flexible Upgradability : Plug-in optional modules, dedicated accessories, Double Power Supply module
• Available in Open Execution & SS Enclosure

Salient Features

• Range: 50A to 630A
• Load Break Switch with visible isolation
• Confirms to IEC 60204
• No. of Poles: 3, 4 & 6
• IP55 & IP65

Salient Features

• Range : 6A to 63A
• Tested at CPRI for AC23A duty
• Self lifting terminals

Salient Features

• Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
• Easy removal of front doors/ change for left or Right
• Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
• Clear embossed earthing marking for ease of installation
• Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
• Identification labels are proveded for circuit
• Gasket are provded to ensure Weather- Proof conditions.
• Rmoval of front plate for easy maintenance
• Optimized dimension ensur enough wiring space for easy cabling and maintenance
• DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
• All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar

Salient Features

• Available in 0.5W, 1.2W, 1.5W, 2.5W and 3.5W
• Wide operating voltage 110-330V
• Very Low energy consumptions
• Average service life 50, 000 burning hours
• 360 degree illuminations
• Vibrations proof lamps
• No mercury and hazardous material.
• Available in colour variant of red, blue, green, yellow and frosted

Salient Features

• Alumium extrusion for better Heat dissipation
• High efficacy & lower power consumption
• Delivers high brightness & excellent illumination even in high ceiling areas
• Extraordinary long life of LEDs (over 30, 000 burning hrs.) & long life of high end electronic driver ensures zero maintenance
• No UV or IR radiations
• Environment friendly as it does not contain Mercury
• Instant light with low running temperatures
• Excellent CRI > 75

Salient Features :

• Aluminum extrusion housing for better heat dissipation
• High colour rendering index
• Up to 80% Energy Saving.
• Color temperature 5500K / 7000K
• Short circuit & open circuit protection on driver.
• Optimized heat sink design for excellent thermal management
• Highly efficient constant current LED drivers
• High brightness power LEDs
• Diffused light with Acrylic PC.
• Recess/surface mounting

Salient Features

• high grade aluminum pressure die cast housing
• toughened glass cover
• different optics for different beam pattern with high spread using high quality lenses and reflector.
• beam angle for lenses is more than 120 degree.
• multiple led are used in series and parallel cluster .
• constant current driver with effeciency >90%
• life span of led over 50000 hours
• Special protection like Reverse EMI, Over voltage up to 300V, Surge voltage up to 4KV provided
• thermal management for heat sink rise above ambient

Salient Features

• Hardened phosphorus bronze contacts
• High grade flame retardant engineering plastic
• Each socket has a spring loaded protective safety shutter

Salient Features :

• No raido frequency interference
• High grade flame retardant engineering plastic
• Good ventilation for proper heat dissipation
• Easy to remove and install
• No humming noise

Salient Features

• Contract material phosphor bronze
• Gold plated
• User friendly shutters
• Easy to remove and install

Salient Features

• Rated Current - 2A
• Rated voltage -250V AC
• Ducts provided on outer surface for heat dissipation
• SS spring provided for better flexibility & easy locking for bulb & CFL
• Highly conductive brass terminals
• Material-FR polycarbonate UV stabilizes

Salient Features

• 10 Years Warranty
• 2, 00, 000 Operations
• Vo grade FR Polycarbonate
• Shock Proof
• Less noise
• Spark shield
• Fire Retardant
• Brass Terminals
• Captive Screws

Salient Features

• Aries is suitable for use with 1xT5 14W, 28W and 54W lamp
• Housing: High quality extruded aluminium in white colour, prewired up to terminal block and with electronics Ballast the curved end caps are elegantly designed.
• Colour: Grey colour in standard execution.
• Lamp holder Bracket: White plastics.
• Ballast: Aries is available in electronics ballast.

Salient Features

• HOUSING : Single pieces deep drawn AL/ MS Sheet
• Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle
• Finish: epoxy powder coating grey hosing & powder coated white reflector
• Optics : reflector made of high purity preanodized.
• Lamp holder : white polycarbonate housing with brass contact & SS Clips
• Mounting : suitable for pole mounted with the help of two screw, OD 50MM
• Height: 5-8m

different optics for different beam pattern with high spread using high quality lenses and reflector. Fixture and led lamp comfirm as per, multiple led are used in series and parallel cluster, high grade aluminum pressure die cast housing.

LPG Leakage Detector, Semi conductor sensor heads used for accurate flammable gas detection, Test button verify alarm operation any time, Loud alarm signal more than 80 dB at 10 ft, Easy installation & maintenance.

Sounding a loud alarm signal of exceeding 80dB at 10 feet, Advance electronic accurate design to detect the water leakage, Easy installation & maintenance, Fully automatic operation, Ergonomic design of detector casing.

Street Light T5, Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle, Finish: epoxy powder coating grey hosing & powder coated white reflector, Optics : reflector made of high purity preanodized, Lamp holder : white polycarbonate housing with brass contact & SS Clips

Electric meter box, Made from engineering plastics, Hinge type locking arrangements, Meter push buttons & optical port can be accessed without opening meter box cover, Push buttons & optical provided on meter box.

Rewireable Offload Changeover Switch (Side Handle Operated), Metal Clad Plugs & Sockets : 10A, 20A for single Phase (2P+E), 250V, Rewireable Switch Fuse Unit : 16 Amps to 320 Amps.

Highly efficient heat sink design quickly removes heat away from the LED chip and dissipates heat through the aluminum fin design .This helps to prolong the lifespan of the LED. The reflector is made from high purity imported aluminum for increased reflective efficiency insuring the light directed within the desired area it improves the light uniformity maximization the advantages of energy saving .

Aesthetically pleasing grey colour Internal Sliding Knob Latch, Easy removal of front doors change for left or Right, Gland Plates at top and bottom are removable for ease of use in entry and termination of cables, Clear embossed earthing marking for ease of installation, Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage, Identification labels are proveded for circuit, Gasket are provded to ensure Weather- Proof conditions., Rmoval of front plate for easy maintenance, Optimized dimension ensur enough wiring space for easy cabling and maintenance, Optimized dimension ensur enough wiring space for easy cabling and maintenance, Optimized dimension ensur enough wiring space for easy cabling and maintenance.

Domestic switches, ROHS compliance, Captive screws, Dual protection for Spark shield, High grade flame retardant engineering plastic, High grade flame retardant engineering plastic.

Luminaire housing : Black textured body coated with epoxy powder high pressure Aluminium Die Cast. Mounting can be done by a hook on rubber grommet fixed on the Housing.

ROHS compliance, Captive screws, Dual protection for Spark shield, High grade flame retardant engineering plastic, Silver Nickel Contact for trouble free operations.

No raido frequency interference, High grade flame retardant engineering plastic, Good ventilation for proper heat dissipation, Easy to remove and install, No humming noise.

Salient Features

• Available in Single Phase Two Wire & Three Phase Four Wire.
• Universal Auxiliary Supply 80 to 300V AC/DC.
• Push button based site programming of PT ratio.
• Bright 4 digit 14mm LED display.
• Colour Indication for R, Y, & B phases (for 3 Phase Meter).
• Same model for V & kV.
• Auto scroll facility & scroll lock facility (for 3 Phase Meter).
• Network selection for star (3 Phase 4 Wire) and delta (3 Phase 3 Wire) (for 3 Phase Meter).
• PT Primary Selectable : 110V, 1.1kV, 6.6kV, 11kV, 33kV, 66kV, 132kV, 220kV, & 440kV.
• PT Secondary Fixed : 110V.
• Available in Class Accuracy 1.0 & 0.5

Application

• Electrical Panels - Industrial HT & LT Panels.
• Motor Control Centres, Distribution Contol & Relay Panels.
• Air Conditioning and Refrigeration Panels.
• Genset Panels.
• Generation, Transmission and Distribution Panels.
• Test Benches and Laboratory Equipment.
• Uninterrupted Power Supply.
• Special OEM Application.

Salient Features

• Microprocessor based intelligent auto switching control.
• Automatic C/K and rated step adjustment.
• Automatic CT polarity correction.
• Display of power factor, current & total harmonic distortion of current.
• Programmable sensitivity.
• Last step can be used as alarm / fan output.
• Under / over voltage alarm, under / over compensate alarm & high distortion alarm.
• available in 6, 8, 12 & 14 Steps

Salient Features

• DUMAC software is used for monitoring Dual Source Plus meters using RS485.
• By the software user can communicate upto 255 meters through a single port.
• User can configure all meter parameters, change relay setting through the software itself.
• Reports can be Generated in excel format also
• User can see the details of corresponding meter in a much compact way which includes1.Instantaneous parameters2.History Data3.Mains to Generator Data4.Generator to Mains Data

Salient Features

• Available in Single Phase, Two Wire.
• Range: 10-60A in Accuracy Class-1.
• As per IS : 15884 : 2010.
• Load can be disconnected in case the credit limit becomes Zero or the current exceeds the defined load limit.
• Two latch ralays are provided for reconnection/disconnection of load.
• Buzzer to give alarm in case of low credit/overload.
• Data download through hard wired port for:(a) Last 25 tamper events(b) Load survey data for 45 days
• Allow user to budget their consumption.
• Transparent system for utility and Consumers.
• Manual Meter Reading system not required.
• Meter bill delivery is not required.
• Meter Bill collections follow up is not required to be done by the utility.
• Supply disconnection is automatic for non-Payment Customers.
• Anti-tamper Features provided in the meter as per Indian standards.
• Software solutions for communication also available
• Also available in dual source application.

Application

• For Residential & Commercial Use.

Salient Features

• Made from engineering plastics.
• Hinge type locking arrangements.
• Meter push buttons & optical port can be accessed without opening meter box cover.
• Push buttons & optical provided on meter box.
• Available for both Single Phase & Three Phase Meters.

Salient Features

• Made from engineering plastics.
• Hinge type locking arrangements.
• Meter push buttons & optical port can be accessed without opening meter box cover.
• Push buttons & optical provided on meter box.
• Available for both Single Phase & Three Phase Meters.

Salient Features

• Widest Range of 3P & 4P Contactors upto 800A
• 25 Models in just 9 Frames
• Capacitor Duty Contactors upto 62kvar
• Contactors suitable for Crane, Mining, & other special application also available
• Highest Electrical Life upto 2.5 Million operations
• Confirmity to latest IEC / IS Standards
• Site Mounted add on accessories
• Safety Cover to avoid dust
• Type II co-ordination
• CE Marked & UL Certified

Salient Features

• Range : 40A to 3200A as per IEC 60947 - 6 - 1
• Intelligent integration of control
• Compact Secure Transfer System
• Easy Selection of automatic & manual control
• Flexible Upgradability : Plug-in optional modules, dedicated accessories, Double Power Supply module
• Available in Open Execution & SS Enclosure

Salient Features

• Range: 50A to 630A
• Load Break Switch with visible isolation
• Confirms to IEC 60204
• No. of Poles: 3, 4 & 6
• IP55 & IP65

Salient Features

• Range : 6A to 63A
• Tested at CPRI for AC23A duty
• Self lifting terminals

Salient Features

• Aesthetically pleasing grey colour Internal Sliding Knob/ Latch
• Easy removal of front doors/ change for left or Right
• Gland Plates at top and bottom are removable for ease of use in entry and termination of cables
• Clear embossed earthing marking for ease of installation
• Cement guard are provded to restrict the entry of plaster or any foreign particles before installation of DB's at constructin stage
• Identification labels are proveded for circuit
• Gasket are provded to ensure Weather- Proof conditions.
• Rmoval of front plate for easy maintenance
• Optimized dimension ensur enough wiring space for easy cabling and maintenance
• DIN Channel is provided with stoppers at the corner for avoiding slippage of devices
• All distibution boards are supplied with insulated pin type copper busbar rating up to 200 A and Neutral bar

Salient Features

• Available in 0.5W, 1.2W, 1.5W, 2.5W and 3.5W
• Wide operating voltage 110-330V
• Very Low energy consumptions
• Average service life 50, 000 burning hours
• 360 degree illuminations
• Vibrations proof lamps
• No mercury and hazardous material.
• Available in colour variant of red, blue, green, yellow and frosted

Salient Features

• Alumium extrusion for better Heat dissipation
• High efficacy & lower power consumption
• Delivers high brightness & excellent illumination even in high ceiling areas
• Extraordinary long life of LEDs (over 30, 000 burning hrs.) & long life of high end electronic driver ensures zero maintenance
• No UV or IR radiations
• Environment friendly as it does not contain Mercury
• Instant light with low running temperatures
• Excellent CRI > 75

Salient Features :

• Aluminum extrusion housing for better heat dissipation
• High colour rendering index
• Up to 80% Energy Saving.
• Color temperature 5500K / 7000K
• Short circuit & open circuit protection on driver.
• Optimized heat sink design for excellent thermal management
• Highly efficient constant current LED drivers
• High brightness power LEDs
• Diffused light with Acrylic PC.
• Recess/surface mounting

Salient Features

• high grade aluminum pressure die cast housing
• toughened glass cover
• different optics for different beam pattern with high spread using high quality lenses and reflector.
• beam angle for lenses is more than 120 degree.
• multiple led are used in series and parallel cluster .
• constant current driver with effeciency >90%
• life span of led over 50000 hours
• Special protection like Reverse EMI, Over voltage up to 300V, Surge voltage up to 4KV provided
• thermal management for heat sink rise above ambient

Salient Features

• Hardened phosphorus bronze contacts
• High grade flame retardant engineering plastic
• Each socket has a spring loaded protective safety shutter

Salient Features :

• No raido frequency interference
• High grade flame retardant engineering plastic
• Good ventilation for proper heat dissipation
• Easy to remove and install
• No humming noise

Salient Features

• Contract material phosphor bronze
• Gold plated
• User friendly shutters
• Easy to remove and install

Salient Features

• Rated Current - 2A
• Rated voltage -250V AC
• Ducts provided on outer surface for heat dissipation
• SS spring provided for better flexibility & easy locking for bulb & CFL
• Highly conductive brass terminals
• Material-FR polycarbonate UV stabilizes

Salient Features

• 10 Years Warranty
• 2, 00, 000 Operations
• Vo grade FR Polycarbonate
• Shock Proof
• Less noise
• Spark shield
• Fire Retardant
• Brass Terminals
• Captive Screws

Salient Features

• Aries is suitable for use with 1xT5 14W, 28W and 54W lamp
• Housing: High quality extruded aluminium in white colour, prewired up to terminal block and with electronics Ballast the curved end caps are elegantly designed.
• Colour: Grey colour in standard execution.
• Lamp holder Bracket: White plastics.
• Ballast: Aries is available in electronics ballast.

Salient Features

• HOUSING : Single pieces deep drawn AL/ MS Sheet
• Cover :UV Stablized acrylic cover with rubber gasket fitted with toggle
• Finish: epoxy powder coating grey hosing & powder coated white reflector
• Optics : reflector made of high purity preanodized.
• Lamp holder : white polycarbonate housing with brass contact & SS Clips
• Mounting : suitable for pole mounted with the help of two screw, OD 50MM
• Height: 5-8m