Verified
Add Review
Our Products
Lamps
1 Products availableFire Alarm System
1 Products availableMeteorological & Weather Instruments
1 Products availableLeak Detectors
1 Products availableInstrumentation & Control Equipment
1 Products availableTransmitter Device
1 Products availableRouter, Cables & Networking Devices
1 Products availableGas Analyzers
1 Products availableWe offer a complete product range of Moisture Meter, Dew Point Meter and Broken Filter Bag Detector
DP-101 is a Portable Moisture & Temperature meter or a sensor that provides an excellent reliable, economical and Time-saving solution for measurement of moisture n the field.
It measures Moisture-in-oil in terms of the Water Activity (aw) and Temperature. The same gets converted into PPM units as in Transformer applications, PPM-unit is traditionally used.
| Humidity | 0 to 100% RH, non-condensing |
|---|---|
| Temperature range | -10 to 50 °C |
| Display | BACKLIT LCD |
| Power supply | 6 VOLTS, DC 4 NOS Rechargeable batteries |
| COMPUTER INTERFACE | RS-232 |
| DATA LOGGER | 32 kb |
| Storage temperature | -40 to 70 °C |
| MOISTURE-IN-OIL PROBE: | |
| Water activity | 0 – 1 |
| Relative Saturation (RS) | 0 to 100 % |
| Accuracy | 0.025 |
| Temperature. | -40 to 100 °C |
| PPM of water | 0-1000 ppm typical |
| Water Sensor | Thin Film Polymer |
| Temperature Sensor | RTD 100 |
| Sensor protection grid | Aluminium Alloy |
| Pressure range of sensor | 1 – 5 bar |
| Probe material | Stainless steel |
| Probe cable length | 2 meters Standard |
| Probe Length Extension | Upto 10 Meters Opts |
HNLs Model DP-102 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for moisture monitoring in commercial and industrial applications.
Periodic monitoring of industrial Air systems results in a reduced maintenance cost & downtime caused by condensate, the leading cause of corrosion in pneumatic systems.
| PRINCIPLE | CAPACITIVE THIN FILM Polymer |
|---|---|
| DEW POINT RANGE | – 60° C TO + 30°C |
| MOISTURE. | 0 – 23000 PPM |
| ACCURACY | +/- 2% of FS |
| MAXIMUM SAMPLE TEMP. | 75°C |
| MAXIMUM PRESSURE | 12kg/cm |
| RESPONSE TIME | 10 SECONDS FOR 63% STEP CHANGE |
| DISPLAY | 3 1/2 DIGIT LCD (Alpha Numeric) |
| POWER | Rechargeable Batteries |
| INLET SAMPLE PORT. | 1/4” OD TUBING |
| DIMENSIONS. | 196 X 100 X 40 mm ABS ENCLOSURE |
| WEIGHT | 1/2 KG |
| ADDITIONAL FEATURES (OPTIONAL) | |
| Computer Interface | RS-232 link for Data in ASCII Delimited Format, 2400 Baud 8 Bits, 1 Stop, 1 Start, No Parity. |
| Data Logger | 32 Kbyte, Non-Volatile Memory |
| ACCESSORIES | Charger working on 230V AC 50 Hz, Instruction manual, calibration test certificate, Leather carrying case, 5LPM flow meter, 2 mtr teflon tubing |
Timely Detection of Broken Bags in a Bag House Proven Technology, Time-Tested and Economically Priced Detector. It measures the Triboelectric effect and determines when particle Emissions exceed the acceptable levels.
| Technique | Tribo – Electric charge transfer | |
|---|---|---|
| Sensitivity | Adjustable | |
| Operating Temp (Ambient) | -20 to 70 °C | |
| Flue Gas Temperature | 0-250 °C (upto 1000 °C Opt) | |
| Ranges | 1-1,000 mg/m3 | |
| Response Time | Instantaneous | |
| Duct Width | 50 mm to 2.2 m | |
| Positioning | 90 °C to Duct Wall | |
| Communications Path Length | Up to 1,000 meters | |
| Socket | Single 1 Flat Flanged Fitting | |
| Mounting Details | Dia 40 mm, Quick Disconnect Fitting With Clamp And Gasket | |
| Construction | 316 Grade Stainless Steel | |
| Sensor Length | 25, 100, 200, 500, 1000 mm or custmised | |
| Insulation | PTFE (T Model – Glass Ceramic) | |
| Sensor Diameter | 10 mm | |
| Power Supply | 24 V DC | |
| Output | 4-20 mA | |
| Alarms | Green – Normal Yellow – Warning Red – High Alarm |
|
| Alarm Delay | Adjustable up to 10min | |
| Averaging Time | Programmable Up to One Hour | |
| Output – Remote Alarm | SPDT Relay 24 V DC 5 mA | |
| Power Supply | 110/220 Volts 50 Hz Ac or 24 V DC |
Andheri West, Mumbai, Maharashtra