HJE Tech India Private Limited

Noida, Uttar Pradesh

Function:

This unit is fully automatic way of mixing solder paste. The internal motor rotates and turns, which is the mixing concept. The solder paste mixer has several advantages over manual mixing, including the ability to arbitrarily regulate the direction and duration of stirring as well as the unchanging mixing speed.

Features:

1, Driven by high speed motor, fast speed and large torque;

2, Timer control, can set the mixing time;

3, Fully enclosed construction to ensure operator safety;

4, Adapt to the standard 500g solder paste bottles of various brands; stir 2 bottles in parallel;

5, The solder paste bottle does not need to be opened during the stirring process. stirred period about for 1-3 minutes.

6, Drive by electricity power only, no need air or other supply.

7, Mixing principle is on the basis of Motor rotation and revolution mode of agitation, no need to defrost the paste. Need to recovery the paste in short time, then the solder can be used after stirring well and deforming.

8, Process:Put in solder pastePut the adapter on the other sideClose the lid and make sure there are no foreign objects inside the machineSet the timestart Automatic shutdown - take out7, Compatible With SMEMA interface which can be directly connected to other equipment.

Specification:

Function:

This equipment is used before and after SPI, AOI, or in the production line for temporary storage.

Features:

1Robust steel structure design improves the stability of the equipment;

2Smooth and parallel width stainless steel screw adjustment method;

3PLC control work is stable and reliable + touch screen control interface;

4Imported photoelectric sensor to prevent false induction, safer and more reliable;

5Stable and accurate lifting mode (servo motor is selected)

6Optional mode: rejection, detection or pass throgh (and buffer mode);

7Variable speed control;

8The length of the machine can be customized;

9Adopt a special conveying track design to prevent jamming;

10Heavier bottom design, not easy to transposition;

11With four-core SMEMA signal cable, which can be communicate with other equipment to achieve inline operation;

Specification:

Functions:
The conveyor can be used as automatic connection line among equipment sets in SMT and AI production lines to save labor cost and connect front and following part of equipment sets
Features:

1. Independent electric box, modular control system, simple and beautiful wiring layout;
2. Independently development by SZWIT with an integrated control board with stable performance;
3. Board in and out control by the front and rear photoelectric sensors cooperate,
4. The connection between the adjacent equipment in the SMT production line has the function of transmission and pause
5. The transmission mode is double stepping motor, stepless variable speed, low voltage work is safer
6. Double precision ball screws to adjust the width, Ensure the accuracy of width adjustment
7. Hardened chrome-plated rods, widened guide rails and extended linear bearings, more stable in wear resistance
8. One-touch operating to switch flow direction, double flow direction can be switched easily
9. With SMEMA standard four-core signa cable which can be directly connected to other equipment.
   
   Specification:

   Model	0.5m (Single rail)	1m (Dual-rails)
   Supply voltage	Single-phase AC220V/50-60HZ
   PCB width size(mm)	50350mm
   Transmission height	90030mm
   Overall Dimension	L500W1150H905mm	L1000W1150H905mm
   PCB Transport direction	LR (RL One-key switch flow direction)
   Transport speed	1-12m/min(Adjustable)

Function:

Semi-automatic solder paste printing machine is an equipment to use on SMT production, working principle is to using the stencil to print the solder paste on the specified pad, the good or bad solder paste printing, directly affect the final solder quality.

Features:

1, Using precision guide rail and the Panasonic speed regulating motor to drive the scraper, ensure the printing stability and precision;

2, Printing scraper can be fixed up by rotate 45 degrees is convenient for printing stencil and squeegee cleaning and replacement;

3, Scrapers can be adjusted forward and backward to select suitable position;

4, Combined with a fixed groove printing plates and PIN, easy to installation and adjustment, adapt for single and double sides printing;

5, Calibration by using stencil movement, combined with printed (PCB), X, Y, Z. adjustment, convenient and efficient;

6, PLC + touch screen display, more stable and easy to operate;

7, Single direction, double directions or other kinds of printing methods can be set;

8, Automatic counting function, easy to statistics and arrange production;

9, Adjustable blade angle, steel blade, rubber scraper are suitable;

10, Touch screen with a screen saver function, the time can be adjusted to protect the touch-screen life;

11, Automatic alarm of cleaning the stencil , convenient for cleaning the stencil in time and ensure the printing quality;

12, Using AE unique programming design, easy to adjust printing scraper;

13, Display the printing speed and can be adjusted;

14, A special cylinder is used for lifting up and down to ensure stable operation.

Specification:

Function:

This machine is used to inverter flip PCBs (180degrees) for double side process.

Features:

1. PLC control system +Touch-screen panel which is stable and reliable, easy to operate.;
2. Flipping power supply by stepping motor, speed fast;
3. With preventing plate to avoid board stuck, optical sensor to make sure the flipping safety;
4. Professional guide rail design with all aluminum material, Swift, smooth and precise operations;
5. Full closed design make sure the highest operation protection level;
6. Trouble-locating and security detection system, visual sound-light alarm;
7. Standard SMEMA signal cable to communicate with other equipment to achieve inline operation.

   Specification

   Model	WIT-PC460A
   DimensionLWH	6039701250(mm)
   PCB SizeLW	5050-535460(mm)
   PCB Thickness	0.6-4(mm)
   Transport direction	L-R or R-L (optional)
   Transport speed	0.5-5m/min
   Transport Height	90030(mm)
   Power Supply	AC220V10V, 50/60HZ
   Power	500W
   Control Mode	PLC+ Touch Screen

Function:
The surface mount PCB shuttle conveyor can be used for PCB board transport from one-track machine to dual-track placement machine for subsequent production. This one-track to dual-track transport can save labor cost and improve production efficiency.
Features:

1. The exterior structure are welded with metal plate and spray coated for the outer surface.
2. PLC + touch screen display, more stable and easier to operate;
3. Professional guide rail design with all aluminum material, Swift, smooth and precise operations
4. It is equipped with intelligent touch screen control interface which is quite convenient.
5. Shuttle Speed, distance, board deliver timing setting by software and sound-light alarm function.
6. Stepping motor and sever motor to ensure the accuracy, stability and longer lifetime.

7.Shift mode:
One-track in one-track out, one operating shuttle cycle
Two-track in one-track out, two parallel shift operating cycle
8.With Standard SMEMA to communicate with other machines to achieve inline operation.
9.Shuttle sizes can be customize upon request.
Specifications:

Functions:

Equipped at the end terminal of SMT line, designed for unloading the PCBs, sensors are provided to prevent platform movement until the PCB has been fully inserted into the magazine automatically, dual controlling system, independent control system, reduce labor, double increase the productivity efficiency.

Features

1. The exterior structure is made of full sheet metal welding, surface treatment by spray coating for the sealing plate;

2. PLC control system +Touch-screen panel which is stable and reliable, easy to operate.

3. The push force can be adjusted according to PCB thickness to avoid damage of PCB caused by magazine deformation.

4. The lifting adopts precision ball screw, which has the characteristics of high speed, low noise, high precision and durability.

5. Trouble-locating and security detection system, visual sound-light alarm;

6. Equipped with standard SMEMA signal lines, which can be connected to other equipment for online automatic operation.

Specifications

Functions:

Equipped at the end terminal of SMT line, designed for unloading the PCBs, sensors are provided to prevent platform movement until the PCB has been fully inserted into the magazine automatically, dual controlling system, independent control system, reduce labor, double increase the productivity efficiency.

Features

1. The exterior structure is made of full sheet metal welding, surface treatment by spray coating for the sealing plate;

2. PLC control system +Touch-screen panel which is stable and reliable, easy to operate.

3. The push force can be adjusted according to PCB thickness to avoid damage of PCB caused by magazine deformation.

4. The lifting adopts precision ball screw, which has the characteristics of high speed, low noise, high precision and durability.

5. Trouble-locating and security detection system, visual sound-light alarm;

6. Equipped with standard SMEMA signal lines, which can be connected to other equipment for online automatic operation.

Specifications

Function:

The PCB NG/OK Unloader (Magazine Unloader)is the next station of AOI. The system is available to separate the No-good boards and OK boards from AOI and introduce the NG&OK boards into the corresponding magazines by special shuttle conveyor.

Features:

1The control system adopts PLC control, and the interface adopts touch screen.

2Efficient management of NG/OK boards om upstream system.

3Stable casting-type lifting platform to ensure stability of the machine;

4Four-point pneumatic clamping function to ensure the accurate position of the magazine;

5Special gas circuit with photoelectric protection design function, effectively protection for damage of PCB board.

6Compatible SMEMA interface

Specification

Function:

This pneumatic stencil cleaning machine is specially used for cleaning solder paste, red glue, silica gel and other residues on printed stencils

Features:

1. 1. completely use compressed air as energy, no electricity, there is no fire hazard

   2. dedicated to cleaning SM T steel mesh, P C B MFP and printing press scraper and so on

   3. equipment using precision filtration system

   4. lean + dry process to ensure cleanliness

   5. The liquid pressure can be displayed by the hydraulic gauge on the operation panel

   6. independent exhaust device designed to make the liquid consumption lower

   7. one-button operation, easy to operate easy to clean, dry work

   Specification:

   (LWH) Max Stencil size	Max 75075040(mm), size can be customized
   Liquid tank	40L(Max)
   Optimal liquid tank	35L
   Clean method	360rotation spray clean + compressed air blow dry
   Clean time	2-5 Min(General process)
   Dry time	2-5 Min(General process)
   Air pressure	0.45Mpa0.7Mpa
   Tin slag filtration	Three-stage filtering
   Level 1 filtering	10m (Filtering impurity)
   Level 2 filtering	5m (Filtering solder paste and small particles)
   Level 3 filtering	1m (Filtering rosin and particles)
   Exhaust port size	120H40(mm)
   Machine weight	200kg
   (LWH) Machine size	9456501645(mm)

Features:

Transportation: Input board directly. Stainless steel chain conveyor, durable and special design for aluminum alloy track. Applied floating track for different stages for preventing deformation.

Pre-heating zones: Design for energy saving and removable modules (drawer design). Easy conversion between air flow and IR emitter heating system. Temperature uses the PID control to achievesaccuracy-heating zone and soldering zone is less than.

Flux spraying system. The motion of the spray nozzle is controlled by a stepper motor. Exhausting and filter system installed on the top-corrosion ceramic coating equipped with two low flow rate nozzles : cooling rate4/s

PC. Windows operation interface with Chinese. Saving and loading parameter setting