Our Products
Surgical Equipments
2 Products availableSafety Products
2 Products availableEye Testing Machine
2 Products availablePU Foam, Spring & Coir Mattresses
2 Products availableWe offer the best product range of Akas SYRU 4004 Syringe Pump, Akas Terumax Rx Syringe Pump, Akas Infumax Infusion Pump and Akas Infumax 5005 Infusion Pump.
A syringe is a small infusion pump used to deliver small amount of fluids or medications to a patient. Syringe pumps are more compact and less weight than infusion pumps, it could adjust particular volume of syringes only. It works on the principle of Pascal’s principle. When a pressure is applied in closed container is the same everywhere in that container. Based on this principle, when piston is pressed a force was created inside the syringe, there is a stepper motor inside the pump, it controls the movement of syringe. Hence by the both actions syringe will move and inject the patient as set value. Audible and visual alarms are available for patient safety. KVO (Keep Vein open) mode is available here to prevent backflow and alarm will give indication to caretaker for empty syringe. Automatic Syringe detector is enabled to pre check before injection. Syringe pumps are more wisely used to inject medications rather than infusion pumps, since it is more fast and easy. Bolus & anti-bolus functions available. Less weight and portable, easy to mounded over stands. Battery backup is available.
Overview:
Benefits:
A syringe is a small infusion pump used to deliver small amount of fluids or medications to a patient. Syringe pumps are more compact and less weight than infusion pumps, it could adjust particular volume of syringes only. It works on the principle of Pascal’s principle. When a pressure is applied in closed container is the same everywhere in that container. Based on this principle, when piston is pressed a force was created inside the syringe, there is a stepper motor inside the pump, it controls the movement of syringe. Hence by the both actions syringe will move and inject the patient as set value. Audible and visual alarms are available for patient safety. KVO (Keep Vein open) mode is available here to prevent backflow and alarm will give indication to caretaker for empty syringe. Automatic Syringe detector is enabled to pre check before injection. Syringe pumps are more wisely used to inject medications rather than infusion pumps, since it is more fast and easy. Bolus & anti-bolus functions available. Less weight and portable, easy to mounded over stands. Battery backup is available.
Overview:
Benefits:
Infusion pumps are used to deliver large quantity of nutrients or medications such as insulin, hormones, antibiotics, drugs or pain relievers at very small duration of time. Because of this large quantity of medication at a particular time, we can’t use syringe pump here. Hence those situations suitable for infusion pumps. It works based on Quasi-peristaltic principle. The fluid is filled in a elastomeric pump, which drives the fluid forward through tubing’s under pressure. We can set the flow rate to prevent the patient from harm by over dose and when it is over delivered, it will show alarm indications and flow will stop. It’s called occlusion alarm. Another one important feature is KVO (keep vein open) mode, when the given controlled volume of medication is over, it gives alarm and make the flow directly to low value automatically, so we can add a new bag of volume without closing the vein. Visual and audible alarms are available for even small changes in set value or any disturbances. Battery backup is available, so it can work during power failure times. Light weight and portable model and it can mounded over stands. Infusion pumps are commonly used as intravenously to support patient medications and nutrients. Sometimes it needed for continuous drug delivery such as anesthetics during surgery , chemotherapy for cancer patients, labor & anti- arrythmatic drugs for patients in coronary unit.
Overview:
Benefits:
Infusion pumps are used to deliver large quantity of nutrients or medications such as insulin, hormones, antibiotics, drugs or pain relievers at very small duration of time. Because of this large quantity of medication at a particular time, we can’t use syringe pump here. Hence those situations suitable for infusion pumps. It works based on Quasi-peristaltic principle. The fluid is filled in a elastomeric pump, which drives the fluid forward through tubing’s under pressure. We can set the flow rate to prevent the patient from harm by over dose and when it is over delivered, it will show alarm indications and flow will stop. It’s called occlusion alarm. Another one important feature is KVO (keep vein open) mode, when the given controlled volume of medication is over, it gives alarm and make the flow directly to low value automatically, so we can add a new bag of volume without closing the vein. Visual and audible alarms are available for even small changes in set value or any disturbances. Battery backup is available, so it can work during power failure times. Light weight and portable model and it can mounded over stands. Infusion pumps are commonly used as intravenously to support patient medications and nutrients. Sometimes it needed for continuous drug delivery such as anesthetics during surgery , chemotherapy for cancer patients, labor & anti- arrythmatic drugs for patients in coronary unit.
Overview:
Benefits: