Verified
Write a Review
Our Products
Engine & Engine Parts
1 Products availableWater Pumps
1 Products availableGenerators
1 Products availableSubmersible Pumps
1 Products availableEngine Components
1 Products availableSugar Mill Machinery
1 Products availableDrill & Boring Equipments
1 Products availableConcrete Mixers
1 Products availableOur Complete range of products are Single Cylinder, Twin Cylinder Engines and Pumping Sets.
| Rated H.P. | 6.0 | 8.0 | 10.0 | 10.0
(LOP) |
10.0
(CBW) |
| Rated Kilowatt | 404 | 5.9 | 7.35 | 7.35 | 7.35 |
| Rated Speed RPM | 650 | 850 | 1000 | 1000 | 1000 |
| Type of Bearing | TRB/BB | TRB/BB | TRB/BB | TRB/BB | TRB/BB |
| Lubricating System | Splash | Splash | Splash | PP | PP |
| Cooling System | Water | Water | Water | Water | Water |
| Cubic capacity in Ltr. per cycle | 1.433 | 1.433 | 1.580 | 1.580 | 0.345 |
| Bore in mm. | 114.3 | 114.3 | 120.0 | 120.0 | 120.0 |
| Bore in inch | 4.5" | 4.5" | 4.724" | 4.724" | 4.724" |
| Stroke in mm. | 139.70 | 139.70 | 139.70 | 139.70 | 139.70 |
| Stroke in inch | 5.5" | 5.5" | 5.5" | 5.5" | 5.5" |
| SFC in gram/KWhr as per ISO-10001 | 275 | 275 | 275 | 275 | 275 |
| as per ISO-11170 | 268 | 268 | 268 | 268 | 268 |
| Lubricating Consumption Ltr/Hr. | 0.016 | 0.02 | 0.025 | 0.025 | 0.025 |
| Non. Comp. ratio | 1:18 | 1:18 | 1:18 | 1:18 | 1:18 |
| Fuel Oil | HSD | HSD | HSD | HSD | HSD |
| Lubricating Oil | SAE 30/40 or it's equivalent | ||||
| Net Wt. of bare Eng. Kg. | 290 | 300 | 310 | 315 | 355 |
| Gross Wt. of bare Eng. Kg. | 390 | 400 | 410 | 415 | 455 |
| Found. Stud hole centre distance in mm. | 330x330 | 330x330 | 330x330 | 330x330 | 330x330 |
| Packing case size in cm. | 112x96x74 | ||||
| Note:
|
PP=Plunger pump | Gp=Gear Pump or Rotary Pump | TRB= Taper Roller Baring | BB=Bush Bearing | |
| As innovation is our prime concern, continuous improvements are envisaged. Thus the Illustrations/Specifications are subject to change | |||||
Direct coupled and belt driven centrifugal pumps are single stage, radial flow end, suction type with horizontal shaft and vertically split casings. Pumps are fitted with pulleys or with flexible couplings, to be driven by electric motors or diesel engines. Direct coupled pumps are supplied with a common base plate
Salient Features of the Pump:
Casing :The volute type casing is scientifically designed to produce a smooth flow, with gradual changes in velocity, ensuring the efficiency of the pump. The casing is made of high grade, close-grained cast iron.
Impeller :The impeller is made of high grade, close-grained cast iron, accurately machined on the outside. The interior passages are hand-finished.
Supporting Frame : Robust and sturdy, it is designed to accommodate shaft and ball-bearings. A gunmetal sleeve provides rigid support for the pump.
Shaft : This is made of special shaft steel. Accurately machined, it is designed to transmit maximum power without vibration.
Bearing :Heavy-duty ball-bearings and sleeve-bearings are used to withstand radial/thrust load.
Rotation : The standard rotation of the pump is anti-clockwise when viewed from the driving end. This makes it suitable for direct coupling to the engine.
| Engine H.p. |
Engine rpm |
No of Cyl. |
Pump Size mm |
Pump Type |
Head Range in meter |
Discharge Lit./ min. |
Couple Set bare weight kg.(appr.) |
Couple Set Packed weight kg.(appr.) |
Packing case size cm. |
Packing Case Volume m3 |
| 3.5 | 1500 | 1 | 65x50 | NV-8 | 7 to 10 | 630 to 360 | 125 | 220 | 96x58 x81 |
0.45 |
| 5.0 | 1500 | 1 | 75X62 | NV-8 | 12 to 18 | 1260 to 675 |
202 | 314 | 104x64 x96 |
0.70 |
| 6.5 | 1500 | 1 | 100X100 | NV-8 | 7 to 16 | 2085 to 825 | 210 | 322 | 104x64 x96 |
0.70 |
| 8.0 | 1500 | 1 | 100X100 | NV-8 | 9 to 16 | 2360 to 1500 | 230 | 342 | 104x64 x96 |
0.70 |
| 8.0 | 1600 | 1 | 100X100 | NV-8 | 9 to 16 | 2510 to 1600 | 210 | 322 | 104x64 x96 |
0.70 |
| 10.0 | 1500 | 1 | 125X125 | NV-3 | 7 to 17 | 3120 to 1740 | 275 | 385 | 115x64 x100 |
0.74 |
| 10.0 | 1800 | 1 | 100X100 | NV-4 | 9 to 22 | 2460 to 1230 | 230 | 342 | 104x64 x96 |
0.70 |
| 4.5 | 2050 | 1 | 65x50 | NV-8 | 11 to 18 | 870 to 360 | 125 | 220 | 96x58 x81 |
0.45 |
| 5.0 | 2200 | 1 | 75X62 | NV-8 | 10 to 17 | 1330 to 540 | 202 | 314 | 104x64 x96 |
0.45 |
| 12.5 | 1500 | 1 | 125X125 | NV-2 | 6 to 18 | 3000 to 1625 | * 270 | 375 | 115x64 x100 |
0.74 |
| 15.0 | 1500 | 2 | 125X125 | NV-1 | 6 to 19 | 3050 to 1710 | * 340 | 465 | 130x64 x100 |
0.83 |
| 16.0 | 1500 | 2 | 125X125 | NV-1 | 6 to 19 | 3100 to 2050 | * 340 | 465 | 130x64 x100 |
0.83 |
| 20.0 | 1500 | 2 | 150X150 | NV-3 | 6 to 19 | 4750 to 2500 | * 370 | 495 | 130x64 x100 |
0.83 |
| 25.0 | 1500 | 2 | 150X150 | NV-2 | 6 to 22 | 4875 to 3050 | * 370 | 495 | 130x64 x100 |
0.83 |
Suredramohan Bansal /Mahender Bhai (Hindustan Trading Corporation)
Liberty House, 4, Mavdi Plot, 360 004,, Rajkot, Gujarat - 360004, India
Share us via
View Contact Number 
