BASIC DESIGN FEATURES

• Synochronous A.C. Voltage 240 & 415
• Frequency 50 Hz
• Three phase and single phase winding
• Squirrel cage rotor
• Insulation class B / class F
• Performance as per IS 325, IS 2165 for 3 phase and IS 996 for single phase motors

SALIENT FEATURES

• Casting for body frame, end shields, bearing shields etc., are made out of quality graded grey iron casting which assures a long years of utility
• Shaft EN 8 steel Motors pressure die cast and dynamically balanced / stator core pack built from low loss electrical grade steel laminations. the stator winding consists of modified polyester/polyesterimide base insulated copper wire to give high conductivity and impregnated with synthetic resin to attain high die electric properties / Windings are tested on surge comparison tester
• Die cast aluminium body for frames 56 to 100
• All motors are painted with rust proof epoxy paint
• Prompt after sales service.

FEATURES

• High quality, reliable and heavy type buffering motors for use in industries. Heavy loads can be applied which increases the productivity of the components buffer.

BASIC DESIGN FEATURES

• Synochronous A.C. Voltage 240
• Frequency 50 Hz
• Single phase winding
• Squirrel cage rotor
• Insulation class B
• Performance as per IS 996

SALIENT FEATURES

• Graded grey iron castings which assures a long years of utility
• Shaft-EN8 rotors pressure die cast and dynamically balanced
• Stator core pack built from low loss electrical grade steel laminations
• Winding consists of polyester base insulated copper wire to give high conductivity
• Body frame, end shields, bearing shields are made out of quality
• Windings are tested on surge comparison tester
• Windings are tested on surge comparison tester
• All motors are painted with synthetic enamel black paint

BASIC DESIGN FEATURES

• Shell moulded casting
• Interchangeable Standardized Parts
• Honed Cylinders to give Extra Long Life
• Crank and connecting Rod are made of special Alloy Steel Forgings.
• Needs no footvalve / Jet, hence easy to install and maintain.
• Water outflow through delivery pipe will be pulsated and not continuous.

SALIENT FEATURES

• Ideal for lifting water from deep borewells.
• Effectively used for agriculture, industry and domestic purposes .

BASIC DESIGN FEATURES

• Longer life
• Low noise level/vibration
• Easy to operate
• Low oil consumption
• Minimum maintenance
• Low operating costs

SALIENT FEATURES

• Automobile workshops
• Piston : Automotive type low expansion aluminium alloy .
• Cylinder : Special cost iron, deep finned for quick heat dissipation .
• Valve Plates : Special Stainless steel material for high resistance and efficiency and for self floating .
• Inter / After Cooler : Deep finned aluminium alloy specially designed to keep temperatures low and minimize formation of carbon .
• Crank Shaft : Made of Carbon steel dynamically balanced with roller bearings .
• Diaphragm Pressure Switch : For efficient automatic On and Off automatic venting and noload restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided.

BASIC DESIGN FEATURES

• Synochronous A.C. Voltage 240 & 415
• Frequency 50 Hz
• Three phase and single phase winding
• Squirrel cage rotor
• Insulation class B / class F
• Performance as per IS 325, IS 2165 for 3 phase and IS 996 for single phase motors

SALIENT FEATURES

• Casting for body frame, end shields, bearing shields etc., are made out of quality graded grey iron casting which assures a long years of utility
• Shaft EN 8 steel Motors pressure die cast and dynamically balanced / stator core pack built from low loss electrical grade steel laminations. the stator winding consists of modified polyester/polyesterimide base insulated copper wire to give high conductivity and impregnated with synthetic resin to attain high die electric properties / Windings are tested on surge comparison tester
• Die cast aluminium body for frames 56 to 100
• All motors are painted with rust proof epoxy paint
• Prompt after sales service.

FEATURES

• High quality, reliable and heavy type buffering motors for use in industries. Heavy loads can be applied which increases the productivity of the components buffer.

BASIC DESIGN FEATURES

• Synochronous A.C. Voltage 240
• Frequency 50 Hz
• Single phase winding
• Squirrel cage rotor
• Insulation class B
• Performance as per IS 996

SALIENT FEATURES

• Graded grey iron castings which assures a long years of utility
• Shaft-EN8 rotors pressure die cast and dynamically balanced
• Stator core pack built from low loss electrical grade steel laminations
• Winding consists of polyester base insulated copper wire to give high conductivity
• Body frame, end shields, bearing shields are made out of quality
• Windings are tested on surge comparison tester
• Windings are tested on surge comparison tester
• All motors are painted with synthetic enamel black paint

BASIC DESIGN FEATURES

• Shell moulded casting
• Interchangeable Standardized Parts
• Honed Cylinders to give Extra Long Life
• Crank and connecting Rod are made of special Alloy Steel Forgings.
• Needs no footvalve / Jet, hence easy to install and maintain.
• Water outflow through delivery pipe will be pulsated and not continuous.

SALIENT FEATURES

• Ideal for lifting water from deep borewells.
• Effectively used for agriculture, industry and domestic purposes .

BASIC DESIGN FEATURES

• Longer life
• Low noise level/vibration
• Easy to operate
• Low oil consumption
• Minimum maintenance
• Low operating costs

SALIENT FEATURES

• Automobile workshops
• Piston : Automotive type low expansion aluminium alloy .
• Cylinder : Special cost iron, deep finned for quick heat dissipation .
• Valve Plates : Special Stainless steel material for high resistance and efficiency and for self floating .
• Inter / After Cooler : Deep finned aluminium alloy specially designed to keep temperatures low and minimize formation of carbon .
• Crank Shaft : Made of Carbon steel dynamically balanced with roller bearings .
• Diaphragm Pressure Switch : For efficient automatic On and Off automatic venting and noload restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided.