Our Products
MODEL NO- ILUX EM -02 WASTE WATER FLOW METER
Principle of Operation
Faraday's Law The operation of a magnetic flow meter or mag meter
is based upon Faraday's Law, which states that the voltage induced
across any conductor as it moves at right angles through a magnetic
field is proportional to the velocity of that conductor.
Faraday's Formula
E is proportional to V x B x D where:
E = The voltage generated in a conductor
V = The velocity of the conductor
B = The magnetic field strength
D = The length of the conductor
Application :
Conductivity liquid, such as corrosive liquid; mud , waste water and slurry, water ec.
Sensor Output:
Pulse;420mA;HART;RS485;MODBUS;GPRS
Lining and Body Matereial
PTFE, Rubber Lining and cast
steel; stainless steel body material
Production Name |
MODEL NO- ILUX –EM -02 WASTE WATER FLOW METER
|
Medium |
Waste Water, Mud and various kinds of conductivity liquid |
Diameter |
DN10~DN2000mm |
Accuracy |
+/-0.5% |
Temperature |
<80℃(rubber); <180℃(PTFE) |
Pressure |
10 kg/cm² Max (Higher on Request) |
Flow speed |
0.3~10m/s |
Requirement of pipeline |
Upstream ≥5DN;Downstream≤10DN |
Electrode |
Stainless steel 316L(standard); Titanium; Tantalum ; Hast alloy |
Lining |
PTFE; Rubber |
Connection |
Flange; thread; clamp on |
Body material |
Cast steel ;stainless steel |
Power supply |
220V;24V;Battery |
Output |
Pulse;4~20mA;HART;RS485;MODBUS;GPRS |
Communication |
HART;RS485;MODBUS |
Explosion proof |
Customized |
Protection |
IP65 or IP67 |
Environment |
Environment:-20~60℃ |
ITEM |
ELECTRODE SPECIFICATION |
Material |
The Medium |
SS316L |
Water; Waste water; Corrosive water and Mud, etc; |
Hastelloy B |
Non-oxidizing acids at concentrations less than 10%; NAOH Concentrations less than 50% |
Hastelloy C |
Mixed Acid and Oxidizing salts |
Titanium |
Salt and weak acid ;Not application: hydrochloric acid, nitric acid and other reducing acids |
Tantalum |
Hydrochloric acid(<40%); Sulphuric acid and Other oxidizing acids |
Platinum |
Almost all acid-base salt solution But not application for aqua regia, except ammonium salt |
Tungsten carbide |
Pulp ; sewage ;slurry |
FLOW METER LINNING SPECIFICATION
Lining |
Name |
Symbol |
Performance |
Temp |
Medium |
|
Rubber |
Neoprene |
CR |
Normal wear resistance acid salt |
<80c |
Water |
|
Polyurethane |
PU |
Good wear resistance , bad corrosive resistance |
<80c |
Pulp |
|
|
Fluoroplastic |
Teflon |
PTFE |
Acid Salt with stable Chemical properties |
<140c |
Acid Salt |
|
Polyvinyl Fluoride |
FEP |
Chemical properties same |
<180c |
Acid Salt |
|
Flow Meter Installation
1. Installation location
Flow Sensor Installation
Application :
Conductivity liquid, such as corrosive liquid; mud , waste water and slurry, water etc.
Sensor Output:
Pulse;420mA;HART;RS485;MODBUS;GPRS
Lining and Body Matereial
PTFE, Rubber Lining and cast
steel; stainless steel body material
Flow Meter Installation
1. Installation location
Flow Sensor Installation
Model NO |
ILUX –EM -01 CONDUCTIVE ACID FLOW METER |
Medium |
Conductive Acid , waste water; Mud and various kinds of conductivity liquid |
Diameter |
DN10~DN2000mm |
Accuracy |
+/-0.5% |
Temperature |
<80℃(rubber); <180℃(PTFE) |
Pressure |
10 kg/cm² Max (Higher on Request) |
Flow speed |
0.3~10m/s |
Requirement of pipeline |
Upstream ≥5DN;Downstream10DN |
Electrode |
Stainless steel 316L(standard); Titanium; Tantalum ; Hast alloy |
Lining |
PTFE; Rubber |
Connection |
Flange; thread; clamp on |
Body material |
Cast steel ;stainless steel |
Power supply |
220V;24V;Battery |
Output |
Pulse;4~20mA;HART;RS485;MODBUS;GPRS |
Communication |
HART;RS485;MODBUS |
Explosion proof |
Customized |
Protection |
IP65 or IP67 |
Environment |
Environment:-20~60℃ |
ITEM |
ELECTRODE SPECIFICATION |
Material |
The Medium |
SS316L |
Water; Waste water; Corrosive water and Mud, etc; |
Hastelloy B |
Non-oxidizing acids at concentrations less than 10%; NAOH Concentrations less than 50% |
Hastelloy C |
Mixed Acid and Oxidizing salts |
Titanium |
Salt and weak acid ;Not application: hydrochloric acid, nitric acid and other reducing acids |
Tantalum |
Hydrochloric acid(<40%); Sulphuric acid and Other oxidizing acids |
Platinum |
Almost all acid-base salt solution But not application for aqua regia, except ammonium salt |
Tungsten carbide |
Pulp ; sewage ;slurry |
FLOW METER LINNING SPECIFICATION
Lining |
Name |
Symbol |
Performance |
Temp |
Medium |
|
Rubber |
Neoprene |
CR |
Normal wear resistance acid salt |
<80c |
Water |
|
Polyurethane |
PU |
Good wear resistance , bad corrosive resistance |
<80c |
Pulp |
||
Fluoroplastic |
Teflon |
PTFE |
Acid Salt with stable Chemical properties |
<140c |
Acid Salt |
|
Polyvinyl Fluoride |
FEP |
Chemical properties same |
<180c |
Acid Salt |
1.The conductivity industrial series of electrodes are specially used for the measurement of conductivity value ofpure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in thethermal power plant and the water treatment industry. It is featured by the double-cylinder structure and thetitanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltrationconductive surface is resistant to all kinds of liquid except fluoride acid. The temperature compensationcomponents are: NTC2.252K, 2K, 10K, 20K, 30K, ptl00, ptl000, etc. which are specified by the user.
2.K=10.0 or K=30 electrode adopts a large area of platinum structure, which is resistant to strong acid andalkaline and has strong anti-pollution capacity; it is mainly used for on-line measurement of the conductivityvalue in the special industries, such as the sewage treatment industry and the seawater purification industry.
Integrated Industrial Online Conductivity Transmitter(Rs485 Modbus/RTU)
Technical Parameters | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MeasurementRange | 0.01uS/cm-600 mS/cm or0-100 PSURange can be customized according to customers' requirements | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Resolution | 0.1 mS/cm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Accuracy | 1.5% F.S. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Working Temperature | 065 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Working Pressure |
Digital Moisture Meter
Specification
Static Charge MeterThe static charge meter is a compact digital electrostaticsurface voltmeter, designed to locate and measure surface voltage onstationary, moving objects and equipments. This meter has very high sensitivity and its resolution is 1 volt at the standard measurement distance of 2 (5 cm). The meter is designed toeffectively measure the magnitude and polarity of the surface voltage withgreater clarity and speed than what has been possible before.this ideal for measuring electrostatic charges in plastic, paper, packaging, textile, food, pharmaceutical, electronic and other industries. Chilled Water Flow MeterMODEL NO- ILUX EM -06 CHILLED WATER FLOW METER Principle of Operation Faraday's Law The operation of a magnetic flow meter or mag meter is based upon Faraday's Law, which states that the voltage induced ross any conductor as it moves at right angles through a magnetic field is proportional to the velocity of that conductor. Faraday's Formula E is proportional to V x B x D where: E = The voltage generated in a conductor V = The velocity of the conductor B = The magnetic field strength D = The length of the conductor Application : Electromagnetic Chilled Water Flow Meter Sensor Output: Pulse;420mA;HART;RS485;MODBUS;GPRS Lining and Body Matereial PTFE, Rubber Lining and cast steel; stainless steel body material
FLOW METER LINNING SPECIFICATION
Flow Meter Installation 1. Installation location
Flow Sensor Installation
Digital Lux Meter*Auto revise parameters and measurement *User selectable Lux/Fc *MAX/MIN record *Low batter indication *Auto power off 1) Light lux meter from 0.1lux to 200, 000lux and 0.01Fc to 200, 00Fc 2) Special function: auto power off with disable feature; data hold; MAX/MIN; Backlight 3), Accuracy: (3%+30digits) to reference 4), Sample rate:1 time/sec 5), Auto power off: about 15 minutes 6), Operating environment: 050C(32122F), 085%RH 7), Storage environment:-2060C (-4140F), 085%RH 8), Battery: 1.5V*2 9), Size: 97*50*20.6 mm 10), Weight: 110g GUIDE WAVE RADAR LEVEL METER
APPLICATION Contact Radar level meter Applicable to liquid, solid powder Process temperature:-40 to 250 Process pressure: -1 to 20 Bar Range:0-6m, 0-30m, Accuracy: 1mm Emission frequency: 100 MHz 1.8 GHz Explosion-proof:Exd IIBT4 Process connection: Thread / Flange
JUICE MILK MAG FLOW METERPrinciple of Operation Faraday's Law The operation of a magnetic flow meter or mag meter is based upon Faraday's Law, which states that the voltage induced across any conductor as it moves at right angles through a magnetic field is proportional to the velocity of that conductor. Faraday's Formula E is proportional to V x B x D where: E = The voltage generated in a conductor V = The velocity of the conductor B = The magnetic field strength D = The length of the conductor Application : Juice Milk Mag Flow Meter with pulse;420mA and RS485 output Sensor Output: Pulse;420mA;HART;RS485;MODBUS;GPRS Lining and Body Matereial PTFE, Rubber Lining and cast steel; stainless steel body material low Meter Installation 1. Installation location
Flow Sensor Installation
Turbine Flow Meter
We are a prominent Gujarat based Turbine Flow Meter Manufacturer, Supplier and Exporter In India. Our Turbine Flow Meter is known for its high performance and durability. The Turbine Flow Meter we manufacture is easy to operate and requires low maintenance efforts. Our Turbine Flow Meter FL-100 is a 2-wire Turbine Flow Meter specially used for various industrial applications. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency of the Turbine Flow Meter is linearly proportional to flow rate that is converted to electrical signal 4 - 20 mA. Technical Specifications
Electromagnetic Flow Meter
We are a trustworthy Electromagnetic Flow Meter Manufacturer, Supplier and Exporter In India. Our Electromagnetic Flow Meter is a micro-controller based full-bore type electromagnetic flow transmitter specially used for various industrial applications. This Electromagnetic Flow Meter accurately measures the flow rate of conductive liquids & slurries in closed pipes. Due to simple & rigid design, the flow transmitter is an obstruction less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology in the Electromagnetic Flow Meter offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20 mA DC linearly proportional to volumetric flow. The instrument is based on Faraday's law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring voltage. Specifications
COD Meter
We are the most reliable COD Meter Manufacturer, Supplier and Exporter In India. Our COD Meter HI 83214 multipara meter photometer is a compact instrument featuring different ranges and methods, suitable for a wide range of applications. The COD Meter is designed and built to perform COD analysis in accordance with EPA 410.4 and ISO 15705:2002 standards. Ensuring accurate and repeatable results, COD Meter is the ideal tool for documenting waste treatment processes. COD Meter Measures
Technical Specifications
Bench Top Ph Meter
We are offering Bench Top Ph Meter. Ph benchtop meter with three point calibration model hi 2212 the hi 2212 is a ph and temperature benchtop meter. calibration can be performed at up to three-points using five standard and two custom buffers. this instrument features manual or automatic temperature compensation with the hi 7662 temperature probe. glp (good laboratory practice) feature provides data consistency. A calibration reminder can be set to alert the user, that too much time has elapsed since the last ph calibration and a new one should be performed.
Dissolved Oxygen Meter
We are offering Dissolved Oxygen Meter. Dissolved Oxygen Laboratory Bench Meter Model HI 2400HI 2400 is a dissolved oxygen bench top meter with automatic calibration and % or mgL (ppm) measurement range. The measurement is automatically compensated for altitude and salinity compensation based on the user settings for altitude up to 4000 m and 40 gL for salinity. Measurements are automatically temperature compensated by using the polarographic DO probe with built-in temperature sensor. This probe features screw cap membranes for easy replacement. With a built-in logging function, measurements are stored in non volatile memory, and can be transferred to a PC through the USB port using the optional HI 92000 software and HI 920013 USB cable. The software is provided with an exclusive online guide of all the commands available and allows data printing, plotting and exporting.
Tell Us What are you looking for? Will call you back
Contact Us
|