Our Product / Services
Industrial Plastic Pipes
2 Products availableTmt Bar
2 Products availableAdhesives & Sealants
2 Products availableConstruction Machinery & Equipment
2 Products availableAdhesives
2 Products availablePaver
1 Products availableCnc Machined Components
1 Products availableWe offer the best product range of AAC Blocks Supplier, Module Dimmer and Mortar Joining Bond.
We are the Largest suppliers of AAC Blocks in India.
AAC Blocks find extensive usage in commercial and residential applications. We are named among the renowned Manufacturers and Suppliers of AAC Blocks from Delhi, India. We have a well-equipped production unit that enables us to produce AAC Blocks in bulk at a time. We conduct stringent quality tests on AAC Blocks so as to ensure that only the defect-free product reaches the customers’ end.
Buildings constructed of White Brick Build Tech AAC provide substantial energy savings in both hot and cold climates. The unique closed cellular structure and the thermal mass contribute to a high R-value and air-tightness which reduce heating and cooling costs and improve indoor air quality. Buildings have seen savings on air conditioning up to 35% by using White Brick Build Tech AAC.
White Brick Build Tech AAC has exceptional thermal insulating qualities. In summer, the heat stored in the wall during the day is returned to the outside during the hours of the night. The interior remains cool and pleasant. In winter, the phenomenon is reversed and limits the heating periods and makes significant energy savings; White Brick Build Tech AAC also removes the unpleasant sensation of cold wall.
Advantages of Thermal on White Brick Build Tech AAC.
Energy Savings
Occupant Comfort
Maintenance
Sustainability
Advantage
Safety in Earthquake : In Earth quake prone areas, Light weight building provides more safety than heavy building. Since AAC Blocks reduces 60 percent of dead weight of building, provide more safety in earthquakes.
Gives High Thermal Insulation : Because of Superior thermal insulation property of rating R30, AAC do not allow effect of outer heat/cold on interior of building. This saves A/C cost by more than 30%.
Gives High Sound Insulation : AAC blocks falls in STC-44 (sound transmission class) which make it cheaper & good sound barrier material for residential and social buildings.
Allows No Water seepage : Due to lowest “Water absorptive material”/ “Volume of block” ratio (only 20% in block compare to 65 % in brick) and absence of capillaries (So No capillary action), AAC blocks do not allow water seepage of from exterior to interior of wall.
No efflorescence : Due to seepage resistance as well absence of any salty material in production of blocks there is no chance of Efflorescence in AAC block wall.
Pest resistance : AAC blocks are Pest resistance since Environment required to grow mold, insect, pest is not available in it.
Fire resistance : AAC blocks falling into fire rating of 4 hrs makes it fire resistance wall material for building.
Technical Parameters And Comparison
Parameters | Unit | VALUE | |
---|---|---|---|
Blocks | Brick | ||
Size : length x height | mm | 600 x 200 or 625 x 240 | 225 x 75 |
Size : Thickness | mm | 50, 75, 100, 150, 200, 225 | 105 |
Dry Density | Kg/M3 | 550-650 | 1900-2000 |
Compressive Strength | Kg/cm2 | > 4 |
>4 |
Thermal Conductivity | W/K0M | 0.16 to 0.18 | 0.81 to 0.96 |
Size Variation | mm | + 1 mm | + 10 mm |
Project Impact
Cost Element | % Saving In Element |
% Saving In Impact |
---|---|---|
Steel & Concrete | 10 | 5 |
Carpet Area | 1.5 | 3 |
Plastering Mortar | 35 | 2 |
Joining Moatar | 60 | 1 |
Wastage | 10 | 0.05 |
CAPEX of HVAC system | 30 | 0.3 |
Project Saving | 11.8 |
Additional Information:
Payment Terms : L/C, T/T, Western Union,
SuperThermLay APP PL/MT Waterproofing Membrane that we offer is procured from the trusted sources of the market. During the procurement process, special attention is paid on the quality of Waterproofing Membrane. We are one of the leading Suppliers of Waterproofing Membrane from Delhi, India. We have developed a vast distribution network that enables us to deliver retail as well as bulk orders for the membrane on time.
Features :
Application :
SuperTene is a self-adhesive Waterproofing Membrane. We are one of the prominent Suppliers of SuperTene Waterproofing Membrane from Delhi, India. It is procured from the reputed sources of the market. When it comes to delivery, we always deliver Waterproofing Membrane on time that makes us stand tall among our competitors. It can be obtained from us in small as well as bulk quantities.
Features :
Appliactions :
Tarfelt BH/ DPC Waterproofing Membrane offers total impermeability to water. We are counted among the top Suppliers of Waterproofing Membrane from Delhi, India. We procure Waterproofing Membrane from those vendors who manufacture it under the strict vigilance of experts. Moreover, we have the capability to deliver retail as well as bulk orders for Waterproofing Membrane within the stipulated time frame. It can be obtained from us at the best market price.
Features :
Applications :
Our organization has successfully expanded its business in market owing to the offered elevated quality array of Fortune TMT Steel Bar. This bar is widely demanded in metal fabrication industries and construction site. Our offered bar is manufactured with the help of finest grade stainless steel that is sourced from most trusted vendors of the market who are commended for their product quality and lots of goodwill. Clients can avail this bar from us at affordable rate.
Atlanta Crystal RO Water Purifier, Purifier Grey at Best Price
Cocina offers a wide range of 100% satinless steel Plate/Thali Basket which comes with firm grip for easy operation. This Basket is designed to store diverse kitchen articles and is appreciated for features like durability, rust and corrosion resistance, smooth polish and precision finish. This basket comes with divisions wherein utensils can be kept in an organized manner.
We let our buyers lay their hands on our wide assortment of SWR Pipes & Fittings. The SWR Pipes & Fittings that we deal in are provided by us in diverse ranges and brands such as Classic, Gaurav, etc. Our SWR Pipes & Fittings allow easy flow due to smooth inner surface. We can make them available in number of sizes so as to meet different demands of the buyers. We make sure that the placed order, whether small or bulk one, is timely delivered.
Available in three different ranges under the brand names of classic, Gaurav and Asiad (Rubber Sealing ring and self fit type).
Used for soil, waste discharge, ventilation and rain water in buildings (for use in homes, offices, hospitals, industriea, railway stations and bus stand).
Chemical resistant and rust free.
Manufactured as per british, German and IS standards.
Fits easily using adaptors as compared to asbestos cement & cast iron pipes. Easy to install on wall with PVC clips.
Threaded door caps allow for easier observation and removal of blockage.
Allows easy flow due to smooth inner surface.
Available in different sizes from 40 mm to 200mm.
We have a strong foothold as manufacturer and supplier of Free Flow Upvc Plumbing Pipes & Fittings in delhi, india. We are backed by a team of experts having years of experience and in-depth knowledge. Our free flow upvc plumbing pipes & fittings are rust free, lightweight, fire proof and requires less maintenance. Because of all these factors, our free flow pipes & fittings are the preferred choice of the buyers. They are offered by us at the best market prices.
Extremely useful for water connections in buldings, water distribution system, bathroom, kitchen, industrial and commercial buildings (recommended by bmc).
Rust free nature allows bore diameter to remain unaffected.
Light weight thus easy to transport and install.
Fire proof, long lasting and requires less maintenance.
Right dimensions and safe threads determine leak proof joints.
Threads as per is : 554 standard.
Can withstand up to 60 oc temperature when flow is continuous.
Manufactured upvc pipes as per astm-d-1785 & upvc fittings as per astm-d-2467 which are safe for portable water supply. Very safe for plumbing and sanitary usage.
Upvc fittings are available from 15mm to 100mm (12" to 4") as per astm-d-1785 (schd 40 & schd 80) and astm-d-2467 (schd-80) respectively.
We are involved in the business of manufacturing and supplying high quality Gypsum Plaster. The term plaster can refer to Plaster Of Paris (also known as gypsum plaster), lime plaster, or cement plaster. We make use of quality raw materials for the making of our Gypsum Plaster which is free from impurities. Bulk quantities of Gypsum Plaster can be obtained from us at very reasonable rates.
Gypsum Plast
Is a gypsum based plaster product by Magicrete, are light weight, one coat plaster suitable for internal wall surfaces made up of block, brick or stone. Special additives & aggregates added in Magicplast give better surface finish, coverage and workability as compared to normal gypsum plasters.
Gypsum, the magic mineral has been used by man in construction in the form of plaster since 9000 B.C.
More than 1500 million meter square of European interior surfaces are covered every year with gypsum based plaster or plaster board.
Comparison
Gypsum Plast |
Conventional Plaster |
---|---|
Approx. Rs. 10 per sq. fit. |
Sand Cement plaster : Approx. Rs. 10 per Sq. ft. Wall Putty : Rs. 6 per sq. ft. Total Cost Rs. 16 per sq. ft. |
Quality Consistency |
Not Possbile |
Lower Thickness Required |
High Thickness Required |
Shrinkage Crack Free |
Not Possible |
Higher coverage |
Lower Coverage |
Sharp Edges possible |
Not possible |
Flat Surface And Attractive Workability |
Not Possible |
Lesser Wastage |
Higher Wastage |
Water Curing Not required |
Water curing Required |
High Thermal Insulation |
Not Possible |
The company is the known Manufacturer & Supplier of excellent quality AAC Block Adhesive. It is a factory prepared blend of carefully selected raw materials, which are Portland cement and graded aggregates and polymers. Our adhesive is designed to be used with water to produce high strength thixotropic mortar for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers. We make available bulk quantities of AAC Block Adhesive at very nominal rates.
Block Adhesive Bond is a high strength adhesive for quick and firm laying of AAC blocks with thin joints.
Comparison
Block Adhesive Bond |
Conventional Mortar |
---|---|
Approx. Rs. 10 per sq. fit. |
Cement (0.5 kg @ 300 Rs. per bag). Rs 3 + Sand (0.045 cft @ Rs. 40 per cft.)=Rs 1.80 Total = Rs. 4.8 per sq ft. |
Fast Application |
Not Possbile |
Plastering possible after 24 hours | Minimum 7 days curing requried |
Consistent quality due to computerized mixing and texted raw material | Manual mixing and not possible to test every Batch |
High bond strength (almost 5 times more than conventional mortar) | Not possible due to difference in properties of blocks and mortar |
Negligible shrinkable cracks | More Shrinkable cracks |
Easy handling and Storage |
Difficult to keep stock of different components and high wastage |
Technical Specifications
Properties | Specifications |
---|---|
Appearance | Grey Powder |
Water Required | 35 % |
Pot Life | -1.5-2hrs |
Curing | Not Required |
Tensile Adhesive Strength | 3.4 Mpa (as per ASTM-C1660) |
Coverage | 200-225 sq. ft. (for 4"thick blocks) |
Located in Delhi, India, we are actively functioning as Manufacturer and Supplier of Circle Ark Conduit Pipes & PVC Fittings all over the nation. Our Pipes and Fittings are lightweight and can be easily transported or installed. They are stringently checked on terms of quality and rust free properties. We offer Circle Ark Conduit Pipes & PVC Fittings in different lengths and ranges so as to meet diverse demand of the buyers.
Useful for cable ducting in industrial and commerical buildings.
Light weight allows for easy transportation and installation.
Rust free nature allows bore diameter to remain unaltered.
Low maintenance & designed as per IS standards.
Smooth inner surface allows for easy cable insertion and reduces the chances of cutting.
Available in 3 metre lengths.
Available in ranges like light, medium and heavy and in different sizes ranging from 16 to 63mm.
The Composite Piping System that we make available is lightweight and thence easy to transport and install. Our Composite Piping System is vigorously checked under varied quality parameters like rust resistant properties and others so as to offer defect free System. It is commonly used for water connections in domestic as well as commercial buildings. One can purchase it from us at nominal rates. We are trusted Manufacturer and Supplier of Composite Piping System in Delhi, India.
Very useful for water connections in buildings, water supply in bathroom and kitchen & for commerical and industrial buildings.
Rust free nature allows bore diameter to remain unaltered.
Light weight, thus easy to transport and install.
The pipes be easily formed into curves and it permanently holds the formed shape.
Long lasting, fire proof and low maintenance cost.
During constant flow, it can handle temperatures as low as -40oC to maximum 95 oC.
Manufactured as per IS : 15450 standard.
Recommended by BMC.
Prepared by our adroit team of professionals, our Solvent Cement is quality approved having longer shelf life. The Solvent Cement that we deal in is extremely useful in tropical areas. As far as the cost is concerned, it is provided by us at the modest prices. When it comes to delivery, we pack it in leak proof materials so that no wastage occurs during transit. We are a celebrated Manufacturer and Supplier of Solvent Cement from Delhi, India.
Available in 25ml tube to 5 ltr. jerry cans.
Seals leakage completely.
Extremely useful in tropical areas.
Manufactured as per IS : 14182 standards.
we have a strong foothold as manufacturer and supplier of hdpe pipes in delhi, india. They are fabricated by team of adroit professionals under the stringent supervision of experts. Lightweight, rust free, low maintenance, no extra joints and cost-effectiveness are the chief features of our pipes, which is why they are comprehensively demanded. We welcome small as well as bulk orders assuring timely deliveries without any delays. extremely useful in bore well, sprinkler, lift irrigation, drip irrigation, pesticide dispersal and for long distance water supply piping in urban and rural areas. useful in chemical processing industries, telecommunications, vegetable oil, fruit juice, dairies, sewerage and drainage systems. very useful for compressed air in mines and construction area, air conditioning, ducting and saline water supply. light weight thus easy to install and economical. no need for extra joints sockets. low maintenance. lasts upto 10 times more than gi pipe (on adherence to company laid norms) and has no problem of breaking or twisting. smooths continuous flow of water due to smooth inner surface. rust free. not affected by acid and alkali. long lasting, high working capacity and extremely strong. manufactured as per is : 4984 standard for water supply and is : 14333 standard for sewerage application. available in size of 20 to 630 mm and pressure of od pn-2.5 to pn- 12.5.
Ideal for adhesion and repair of concrete structures, our Waterproofing Adhesives have huge demand in the market. We are an eminent Supplier of Waterproofing Adhesives from Delhi, India. Waterproofing Adhesives offered by us reduce cracks by improving the overall mortar strength. Our Adhesives are extensively used for repair works in concrete structures. Owing to our brilliant logistics network, we are capable of delivering bulk orders of the Adhesives.
Features :
Applications :
Extensively used for internal and external masonry wall cracks, our Waterproofing Sealers are high durable. We are reckoned among the distinguished Suppliers of Waterproofing Sealers from Delhi, India. The Waterproofing Sealers we make available are formulated using the finest quality ingredients and in compliance with set industrial norms. To meet the bulk and urgent requirements of the buyers, we maintain a large stock of the Waterproofing Sealers.
Features :
Applications : Waterproofinf for internal &external masonary wall cracks
paver blocks are the perfect alternative to asphalt and concrete. These blocks can be used for anything from industrial floors to patios, streets to sidewalks. We are counted among the top companies, which are engaged in manufacturing and supplying paver blocks from delhi, india. We manufacture and test paver blocks under the strict vigilance of experts so as to ensure their durability. These blocks can be obtained from us in small as well as bulk quantities. features:
We are a reckoned Manufacturer and Supplier of KMLClassic CPVC Plumbing System located in Delhi, India. We have a team of professionals who have in-depth knowledge and years of experience in this domain. It comes with inertness and excellent chemical resistant properties. It is widely used for hot and cold portable water flow. One can obtain CPVC Plumbing System from us at the market-leading prices.
Used for hot and cold potable water flow in Residential buildings, Commercial Buildings, Hotels, Educational Institutions, Swimming Pools etc. that require hygienic and uncontaminated supply of water.
Better chemical and heat resistant properties & lower low thermal expansion & conductivity when compared to other thermoplastic materials and can withstand temperature upto 82oC easily.
Natural immunity to scaling, corrosion, and have better flame & smoke resistance characteristics. Have a very high flash-ignition temperature and do not sustain burning.
Have inertness or excellent chemical resistance properties to a wide range of chemicals. Unaffected by chlorinated water, which is essential for safe use in potable water supplies.
Pipes are available in sizes ranging from 15mm (12") to 50mm (2') in diameter in ASTM-D-2846-SDR 11 & SDR 13.5 specs. Certified by IS standard (IS : 15778). All Fittings are manufactured in SDR 13.5 specs. Fittings from 15mm (12") to 50mm (2") are manufactured in ASTM - D - 2846 SDR - 11 specs. And higher dia sizes pipes & fittings are manufactured from 65mm (2 12) to 100mm (4") as per ASTM - F- 441 & as per ASTM - F- 439 respectively.